If not mistaken around 250km..hope others could answer. As my manual tranny doing 310km for RM50 nowdays.

Mix..but I like to heavy right foot...

Auto & Manual both have ECU, just the matter Auto comes together with tranny controller..

Just pull out your +ve terminal while engine is running, put it back again and let your engine running idle for a while about 5 minutes. Then everything should be fine..

---

Added on August 25, 2009, 3:27 pmYou could buy the door handler together with the key.I saw plenty of this thing at mudah.my

This post has been edited by b48753: Aug 25 2009, 03:27 PM

Just type waja or comined it with glovebox and go to accessories..need to browse long list..

This post has been edited by b48753: Aug 27 2009, 10:29 AM

Welcome to the club..will add your info at 1st page
Regards.

Better get as what u want. Like me smoked you'll suffer on signal light..sometime other motorist don't realize u're gibing signals.
I remember one forumner can order from his frind here..need to browse..

Yesterday at last for 5 years my driver side window regulator broke down..the pulley wheel was broken

Everybody's are welcomed..
I'll update your name at 1st page. please provide more detail as at 1st page.
Yes, you can use RON95 without problems.

---

Added on August 29, 2009, 10:48 am20w-50 is mineral, so quite thick lube, and you'll suffer on FC.
I already change stock extractor to Wei Heng one, but my mechanic did some touch-up before installed it.So far still ok.

This post has been edited by b48753: Aug 29 2009, 10:48 AM

Try Petronas Syntium 800(semi-synthetic) rating 15w-40.Mine using Idemitsu semi-synthetic (10w-40).
One thing good about Idemitsu it's really cleans the engine. Tried using Motul Torbolite last time but feels the oil too thin and make the engine so rash..and further difficult to found at normal shop.

Not quite remember, but if not mistaken around RM150 plus the center bullet.Doesn't include installation but could be additional RM50.I didn't installed there coz doing some engine mod . Got some extra power coz throwing out the cat-con. FC shall be similar to original,sometimes better.

This post has been edited by b48753: Aug 30 2009, 06:03 PM

The Idemitsu oil cost me RM96, at my friends shop at Glenmarie, Shah Alam.
Installed the extractor at my friend's shop also.as mentioned b4 wei yip.

I had some kind of same problem last time on my odometer, they dsplayed half. Report to SC (cos still brand new that time) and they replace the whole meter.

Poor you ray86,the time has come. Just like my window regulator last week..

Normal la bro..1st timer for sure kena ketuk...

Salam too matt wee,
Looks like you're having the same problems like me last week. Your power windows regulator is giving up. It could be the pulley of the regulator breaking up thus making your windows unable to be lifting up. It's common for Waja.
Going to normal shop will make your replacement cost your around RM350-400. So the best way go to spare parts shop, ask them how much the price, then you could ask them if any of shop nearby could do the changing. Last week when I replacing the regulator at driver side, the cost for Proton(plastics) regulator is RM160, while 3rd party (steel) is RM130. The workmanship will cost around RM30-40 per window.

You went to normal shop or parts shop? Did u ask the price for plastics one?

I don't think so.. Mostly it will block the center hazard switch

If you buy directly from spare part shop then the original lamp could be cheaper. Most workshop mark-up the price from spare part shop. That's the trick..

---

Added on September 8, 2009, 1:18 pmHave you check the offset. Mostly standard rims is 6.5JJ while aftermarket doing 7.0JJ

This post has been edited by b48753: Sep 8 2009, 01:18 PM

I've never adjust the headlamp, still stock

7.0 JJ is better coz the rim's width is bigger, better on handling, but beware when rain comes. El-cheapo like Lenso or K-Speed should be ok, but the most important find the lightweight rims so not sacrifice the performance.

I already accumulate 3 problems with the power window:

1) the motor 'kong' - 1 1/2 years after purchase
Synthoms:Windows not moving at all..lucky it happens when the window is closed.
2) power windows button - 3 years after purchase
Synthoms:Windows moving down only. Can't wind up. Click down still can hear motor is working.Very unlcky if this happens.
3) window regulator - 5 years after purchase
Synthoms:Windows moving down smoothly, but winding up stuck. So need to slowly wind up and down abeit again and up, holding the windows in order to full upwind and close the window.

This all happens to the driver side. And i advice you to go directly to parts shop to get the replacement. If not for sure get 'sembelih'..

Is your tranny auto or manual? If say Auto the sound could be possible happens. Did you change the stock rims?