2 DAYS. Normally I drive Kancil MT.

Anyway for new car, what need to be take note or to be careful?

This post has been edited by jacktai: Mar 24 2009, 04:56 PM

radmaszeal
i know.juz to make things easier since many are noobs for cars mar.

i oso noob in cars..hehe

u mean when u release throttle and depress clutch that time? it is caused by campro drive by wire delay...
when u release the throttle that time, petrol still go into ur engine for 1 second like that...
besides that, BLM has very short gear ratio...

don worry, u will know how to control the throttle after a period of time..

btw, my best ever FC:

rm30 for 228km...mostly driving speed is 90-100km/h...

hi there....anyone can suggest go immobliser to use for saga blm and at a low price?

noob here, alignment for the BLM is for 4 wheels or front wheels only?

front only~

sifu is here what about Iswara, Kancil, Viva, Kenari & Kelisa? thanks.

all also front only except da 1 in bold front n back~

actually how do i differentiate a car which can do alignment for 4 or 2 front wheels only?

& why? isn't it better that 4 wheels can do alignment? thanks.

jus bent down n look n da rear~
not all manufacturer will wanna produce independent arm on rear~
so making a torsion beam on da rear is easier n other word for it is call save cost~

just changed my IAFM thingy after waiting for 2 months. take a look at the module

[attachmentid=865869][attachmentid=865876][attachmentid=865881]

thanks for the valuble info. i will bent down later

after change the IAFM, the engine breathe better? performance?

Break in engine? Aiyo, when I send my car for inspection the other day, the people working in proton revv my car until 5k-6k rpm. I also very sakit hati. My maximum revv is 3k rpm only.

N_Silver
immos are not cheap.cheap immos are not recommended.it will range around rm700-1k plus..get those not from the china places and stay free from trouble more.

cheeann
independant arm?torsion beams are those like big lorries ar?the big round ball with a stick?

haha.. me too last time..
juz now i go race and rev my blm ohh.. at highway here... i drove until 140km...
1st gear-30km
2nd gear-55km
3rd gear-80km
4th gear-110km
5th gear-140km++
haha...

hope it will help me to break in my engine... & not broke in my engine... haha...

i wanna ask it is ok to do like this???

my fc suck lately.. 0.2sen/km...

i stick my foot on the pedal and control the rpm very well... at 2k rpm only and i always use 5th gear whenever can...
haiz... still the fc sucks... swith off air cond only earn me back 20km nia...

how..?/ now mileage is 3600km oni...

i think should be ok...bt last time how i did (so called break in) was:

1st gear = 3krpm
2nd, 3rd, 4rd gear = 4k-4.5krpm only change gear
5th gear= 4k-5krpm lo..

mayb u try to check ur eksoz "smell", see whther the petrol burned completely,haha..don know why, i like to check this last time even though don knw how true it is.

tat 1 diff la~