Prime > 1 hour @ 2.7Ghz, stable Sleepy
Off for a week now for assignment... b back on weekend

nice mayb can go beyond 3.0 if pump more vcore..

Hmm..its not easy nia..How i wish i had a try on Phenom
ndgoh..ahaha hardly nia,cos if need go out must go with bro/sis/parents

will OC my 6000+ 2moro(aft bzing my asgnmt)...

if cnt go far atleast go to 3.2GHz..mean use a +/-RM300 proc as a RM5xx proc..

out of topic.. my sb really hot 70++ but space is limited for aftermarket cooling.. can sumone recommend hsf that can fit?



This post has been edited by sharkeer: Oct 13 2008, 06:43 PM

shouldn't it be a north bridge instead?

remove d stock heatpipe cooler, slap a el cheapo cooler master chipset cooler (around RM20), put a 40mm fan on top of it. that should does better job than d stock cooler.

This post has been edited by ah_khoo: Oct 13 2008, 06:50 PM

its 8200 chipset.. is it nb? actually dunno can fit ar? i think the gap is less than 5cm.. will try search tomolo.. skudai pc shop really i dont think they hv stuff like this..

You can check this
http://forum.lowyat.net/topic/789344out.

i'm afraid it cant fit if buy from lyn.. any specific model to look for?

The Blue Ice around 4cm i think..
nVidia chipset are hot..90nm..

my over clocking not update??
or not satisfied??

hi, may i know why my CPU-Z the multiplier show 5.5 only? when open it will show 11 then drop to 5.5. is it normal? the core speed only 1276 mhz instead of 2.5k if 11 multiplier show.

im using phenom 9550. pls advise

Are U turn on the AMD Cool & Quiet ?

disable C&Q n then try to set new power management

yes, its defaulted on, i never touch it
so i should turn in off? my mobo is ta790gx

get sumthing look like this...



disable C&Q in bios.

thx for all the reply. i will turn it off now hehe

how bout ocers dat use heatpipe type mobo like mine ax78?





This post has been edited by anep: Oct 13 2008, 10:34 PM

ya really hot.. cooler master is it? thanks

---

Added on October 13, 2008, 10:36 pmi forgot the pwm.. need hsink too?

This post has been edited by sharkeer: Oct 13 2008, 10:36 PM

I used stock heatsink for N/B , and put 40mm fan at stock pwm heatsink (with one screw)