mine able to run 500x9 @ 1.321v - 1.35v... can't remember... forgot to take screenie back then... super PI passed... haven't prime yet... onli able to OC it to 4.5ghz @ my collage lab since there's aircond there... @ home so damn hot... ipoh hot like hell... my room in KL is much more cooler... haiz...
later on tuesday will post the cpuz screenie...

here's screenie @ 4.0ghz daily usage...


@Silverfire
walau.. so high... scary...

This post has been edited by casperito: Nov 1 2008, 08:43 AM

@silverfire - U're using E8200 rite...

@casperito - nice vcore there dude...but it's the E0...

Anyway I already tested it with IBT for 10 loops and passed the test but windows still gives out random error messages...damn...

ur C0 aa?? hmm... at least ur proc gives out accurate temp... mine... 4.0ghz @ 46c idle on TRUE 120.. still dunno wats wrong with it... ignoring the temps... haiz..
as long as u r able to get 4.5ghz below 1.4v is quite nice alreadi... to me 1.4v is too high...

ps: heard that last time u have prob with ur MARS like mine back then (gamers maniac told me.... i think... forgot alreadi).. settle alreadi??

Yea mine is C0...I used real temp to check and it's 32C idle also on TRUE120...why yours high?What u use to check it?

Hmmm didn't tried to reach 4.5 yet since 4.0 already use 1.4v...yeah for me personally also it's too high...but what to do?vNB set to 1.4v and everything else stock voltages...but still far cry 2 gives me random BSOD...

Hmmm yeah last time my MARS got problems but I already settle it...and I forgot already the problems...hehe....

This post has been edited by Izwan898: Nov 1 2008, 11:03 AM

real temp also showing the same temp as the Tpower2 utility and core temp... i dun wan to care about the temp anymore... later getting a thermal sensor to check the temp... a fren told me that the lower the VID, the higher the temp.... and ask me to ignore the temp.. and im doing that right now.. ekeke...

hhmmm.. since u r using MARS.. vNB is ok la (i think)... last time didn't get much experience with my MARS... a lot of problem... and that time using E2160 onli...

maybe the vSB need a raise also??
the only thing i learn while playing far cry 2 on my oc system is i need to put my vDimm to 2.0v coz if i set it to auto ie 1.95v the game always crashed on me.

not sure about the vSB...
about the vdimm.. usually depends on how high is ur ram running and also depends on the performance level and trfc if im not mistaken... with the right tweak, u'll able to lower the voltages quite a lot... correct me if im wrong... im a noob also.. ehehehe...

I'm using dominator 1066...so in order to run 1:1 with the cpu, I downclock it to 1000...with the stock vdimm that is 2.1v...

in that case i dont know what the problem is coz i oc not dc my ram.
but seriously that game is in need of a patch anyway.

I never raise my vich when I overclock to 500FSB.

Only Far Cry 2 BSOD...other games never encounter yet...

@silverfire - vich??

yep i also have the same problem but it wasnt BSOD but the game just crashes to desktop.
have u tried running it without overclocking ur pc????

Vich = Vsb >.<

Haven't tried it yet hilmi...but it passes the benchmark runs...weird...

@silverfire - sorry I'm a noob

Did your Far Cry 2 run good before this?

yeah i know.
i also can pass the benchmark test but while playing is when the problem happen.

oic...

ah.. vICH = vSB... wakakaka.. never knew that... never ever touch vSB when OC... leave it @ default onli...

any prob with other games?? or onli for far cry 2??
maybe its not ur OC got problem.. its the game...

Vich is rarely raised but if the FSB really high have to add slightly.

This post has been edited by Silverfire: Nov 1 2008, 10:53 PM

usually if going 550-600 fsb above onli right??

Depends on the performance of your motherboard's chipset lo.