as the topic above.wanna ask how low the vcore u guys can o'c the E0 proc to 4.5ghz
if my psu not enuff juice will it effect the vcore results??? (or my proc not an good batch??)
need advise cause did read few reviews ( e8400 E0 @ 4.5ghz below 1.3v) @@


my results





E8400 E0
Tp i45 mobo
2x2gb corsair dominator
gecube 3870
enermax 500watt



TQ

This post has been edited by s_5558: Oct 1 2008, 11:38 PM

bro , thats E0.

couldn't ask more , 4.5g below 1.3v absolutely good.

tried 5g ?

-.- I have to use your vcore to get mine running @ 3.6ghz~

wauuu.... 4.5ghz with 1.3...izzit stable??any secret?

mm...~ even my c0 need 1.4 to go 4.33ghz~~

my C0 can go 4.3ghz stable on 1.37v load..hmm but didnt try stress on 4.5ghz..jus spi oni..

@TS
the screenie at dat vcore urs stable stress?

back to using my old e8400(C0)...

after playing with quaddies, i realise the importance of gtl references values...

for dual core, u also need to get it right, i got to arround stable value of the exact needed reference voltage of my e8400, now i only need 1.25v in bios to get it stable @ 3.8 compare to last time 1.3v+....

still cant get my q9550 perfectly stable on my P35 UT, random BSOD after passed 15-20 loops of IBT, over 3.2 ghz this problem will happens on the quaddies... mayb need better mobo... ?

This post has been edited by lichyetan: Oct 4 2008, 12:25 PM

myb can try loan from DK P45 owner to tweak urs not bad oso 1.25v at 3.8ghz

You need P45 or x48 DFI board.

Remember i having random BSOD in my DK P35?
Now change to DK P45. Not even once random BSOD.

-pWs-

haha... dunno y, it seems its the P35 UT bios... above 400fsb will occurs... tht's y move back to e8400 temporarily... q9550 putting back to the box for sale or mayb keep it till i got $$$ for better board.

Let me use then
Want a quad clock to 4GHz 24/7

-pWs-

hahaha lastime said enuf dy 3.6..now greedy gonna clock 4ghz

Now not even 3.6GHz bro.
Temp already hikes to 72 d.

People is always greedy wat.

-pWs-

bro....those vcore are in bios or after droop ya?

my p35 dk bsod while F@H with stock clock

hehe.. my temp below 72c for my quad q9550 under 3.6ghz @ 1.325v running IBT.... its around 65-68c depends on ambient, highest core... another pair of core lower by 8c.
but my e8400 under same loop @ 3.8ghz seems hotter... around 67c-68c @ 3.8ghz @ 1.25vcore...

all reading using core temp 0.99.3 with 100c tjmax



bios screenies.... dunno y tis p35 ut latest bios will read higher voltage in windows... 1.28v in windows, 1.25v after vdroop. i set less thn 1.25v in bios

This post has been edited by lichyetan: Oct 4 2008, 01:54 PM

I thought you got new babe to play w already.

So nice.
Your core temperature oso big difference eh between cores.

-pWs-

This post has been edited by -pWs-: Oct 4 2008, 01:55 PM

yup, IHS problem....

my dual core also suprise me... so hot the proc... but its IBT temp la... prime95 test below 60c all idle at 47-48c

This post has been edited by lichyetan: Oct 4 2008, 01:58 PM

I thought your rig are on WC.
How come still so hot?

-pWs-

dunno.... good temp on 4850, and the quaddies... bad temps on e8400

its possible if i had good cooling/ram ^^

no secrets .. E8400 E0 proc can do that without doubt (info from few reviews)

yes its stable for 24/7





4.0ghz @1.17v but it will BSOD if run Orthos more than 30 minutes



highest fsb i could go was 580fsb due the ram cant go further


This post has been edited by s_5558: Oct 4 2008, 07:55 PM