later on tuesday will post the cpuz screenie...
here's screenie @ 4.0ghz daily usage...
@Silverfire
walau.. so high... scary...
This post has been edited by casperito: Nov 1 2008, 08:43 AM
[WTA] E8400 E0 o'c, can share ur vcore @ 4.5ghz?
|
|
 Nov 1 2008, 08:15 AM
Return to original view | Post
#1
|
 
Senior Member
662 posts Joined: Feb 2006 From: int eth 5/0/16 vlan 13  
|
mine able to run 500x9 @ 1.321v - 1.35v... can't remember... forgot to take screenie back then... super PI passed... haven't prime yet... onli able to OC it to 4.5ghz @ my collage lab since there's aircond there... @ home so damn hot... ipoh hot like hell... my room in KL is much more cooler... haiz...
later on tuesday will post the cpuz screenie... here's screenie @ 4.0ghz daily usage...
@Silverfire walau.. so high... scary... This post has been edited by casperito: Nov 1 2008, 08:43 AM |
Quote|
|
|
|
|
Nov 1 2008, 09:37 AM
Return to original view | Post
#2
|
|
Senior Member
662 posts Joined: Feb 2006 From: int eth 5/0/16 vlan 13
|
QUOTE(Izwan898 @ Nov 1 2008, 08:57 AM) @silverfire - U're using E8200 rite... ur C0 aa?? hmm... at least ur proc gives out accurate temp... mine... 4.0ghz @ 46c idle on TRUE 120.. still dunno wats wrong with it... ignoring the temps... haiz..@casperito - nice vcore there dude...but it's the E0... Anyway I already tested it with IBT for 10 loops and passed the test but windows still gives out random error messages...damn...  as long as u r able to get 4.5ghz below 1.4v is quite nice alreadi... to me 1.4v is too high... ps: heard that last time u have prob with ur MARS like mine back then (gamers maniac told me.... i think... forgot alreadi).. settle alreadi?? |
|
|
Nov 1 2008, 11:52 AM
Return to original view | Post
#3
|
|
Senior Member
662 posts Joined: Feb 2006 From: int eth 5/0/16 vlan 13
|
QUOTE(Izwan898 @ Nov 1 2008, 10:58 AM) Yea mine is C0...I used real temp to check and it's 32C idle also on TRUE120...why yours high?What u use to check it? real temp also showing the same temp as the Tpower2 utility and core temp... i dun wan to care about the temp anymore... later getting a thermal sensor to check the temp... a fren told me that the lower the VID, the higher the temp.... and ask me to ignore the temp.. and im doing that right now.. ekeke...Hmmm didn't tried to reach 4.5 yet since 4.0 already use 1.4v...yeah for me personally also it's too high...but what to do?vNB set to 1.4v and everything else stock voltages...but still far cry 2 gives me random BSOD...  Hmmm yeah last time my MARS got problems but I already settle it...and I forgot already the problems...hehe....  hhmmm.. since u r using MARS.. vNB is ok la (i think)... last time didn't get much experience with my MARS... a lot of problem... and that time using E2160 onli... |
|
|
Nov 1 2008, 12:26 PM
Return to original view | Post
#4
|
|
Senior Member
662 posts Joined: Feb 2006 From: int eth 5/0/16 vlan 13
|
QUOTE(hilmiangah @ Nov 1 2008, 12:21 PM) maybe the vSB need a raise also?? not sure about the vSB...the only thing i learn while playing far cry 2 on my oc system is i need to put my vDimm to 2.0v coz if i set it to auto ie 1.95v the game always crashed on me. about the vdimm.. usually depends on how high is ur ram running and also depends on the performance level and trfc if im not mistaken... with the right tweak, u'll able to lower the voltages quite a lot... correct me if im wrong... im a noob also.. ehehehe... |
|
|
Nov 1 2008, 10:46 PM
Return to original view | Post
#5
|
|
Senior Member
662 posts Joined: Feb 2006 From: int eth 5/0/16 vlan 13
|
QUOTE(Izwan898 @ Nov 1 2008, 02:14 PM) I'm using dominator 1066...so in order to run 1:1 with the cpu, I downclock it to 1000...with the stock vdimm that is 2.1v... oic...QUOTE(Silverfire @ Nov 1 2008, 04:08 PM) Vich = Vsb >.< ah.. vICH = vSB... wakakaka.. never knew that... never ever touch vSB when OC... leave it @ default onli...QUOTE(hilmiangah @ Nov 1 2008, 09:23 PM) yeah i know. any prob with other games?? or onli for far cry 2??i also can pass the benchmark test but while playing is when the problem happen. maybe its not ur OC got problem.. its the game... |
|
|
Nov 1 2008, 10:55 PM
Return to original view | Post
#6
|
|
Senior Member
662 posts Joined: Feb 2006 From: int eth 5/0/16 vlan 13
|
QUOTE(Silverfire @ Nov 1 2008, 10:52 PM) Vich is rarely raised but if the FSB really high have to add slightly. usually if going 550-600 fsb above onli right?? |
|
|
|
|
|
Nov 13 2008, 12:00 PM
Return to original view | Post
#7
|
|
Senior Member
662 posts Joined: Feb 2006 From: int eth 5/0/16 vlan 13
|
QUOTE(clawhammer @ Nov 13 2008, 11:48 AM) My friend's E8400 idles at around 55C-60C and very likely it's a problem with the thermal sensor. I'm not sure if Intel fixed it on newer batches? I haven't been reading up news for some time my E0 also have the same problem... idle around 48-52c... use thermal sensor onli showing around 30++c onli... |
|
|
Nov 13 2008, 12:52 PM
Return to original view | Post
#8
|
|
Senior Member
662 posts Joined: Feb 2006 From: int eth 5/0/16 vlan 13
|
QUOTE(clawhammer @ Nov 13 2008, 12:09 PM) If that's the case then it's a problem with the digital thermal sensor on the chip. This has been a known problem for the 45nm dual cores for a while. read some thing about it somewhere... forgot alreadi.. but i thot the issue onli occur on C0 chips... haiz... penin alreadi.. |
|
|
Nov 14 2008, 01:59 PM
Return to original view | Post
#9
|
|
Senior Member
662 posts Joined: Feb 2006 From: int eth 5/0/16 vlan 13
|
QUOTE(seanlimys @ Nov 13 2008, 08:20 PM) duno y i get one seriusly hot core...running 4.05ghz on tpower...450*9 4-4-4-12...on pccooler hdt-1204 heatsink...vcore 1.24v..idle 51..load 69...ftw... huhuhu... ur E84 same as mine... |
|
|
Nov 16 2008, 03:50 AM
Return to original view | Post
#10
|
|
Senior Member
662 posts Joined: Feb 2006 From: int eth 5/0/16 vlan 13
|
QUOTE(hilmiangah @ Nov 14 2008, 08:11 PM) still good what. aik?? that kinda weird for an E0...my e84 E0 need 1.37v to stable at 4.05ghz.  wat is ur E0 rated vid?? QUOTE(Izwan898 @ Nov 14 2008, 09:48 PM) And my E84 C0 need 1.4v to stable at 4ghz... huhuhu.. change proc.. rich guy detected.. ekeke.....time to change the proc I guess...grab the OEM E0 AllnGap selling la.. cheap... shud do great... QUOTE(clawhammer @ Nov 15 2008, 05:49 PM) My C0 E8200 needs 1.4625V for 4.06Ghz (508x8) so the E0 is still better in some sense any chance of it getting higher?? since my E84 got crappy DTS.. too afraid to go 4.5ghz for 24/7... last time tested 4.5ghz @ my lab with aircond.. super pi passed but forgot to took the screenie.. back home it won't even boot at the setting that i saved... haiz... |
|
|
Nov 16 2008, 02:49 PM
Return to original view | Post
#11
|
|
Senior Member
662 posts Joined: Feb 2006 From: int eth 5/0/16 vlan 13
|
QUOTE(seanlimys @ Nov 16 2008, 09:59 AM) my e8400 e0 running at 4.05ghz at 1.24v..duno whether its ok or bad core?? ok la like that... have u tried 4.5ghz?? mine last time around 1.35v |
| Change to: |  0.0245sec
 0.60
 7 queries
 GZIP Disabled
Time is now: 10th December 2025 - 09:07 PM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.