@@, if he has 2gb ram he won't hit the 32-bit addressing limitation yet.

I just did a Vantage on stock, 700/1100

My CPU really -.- lol.

^ Intel Stock Cooler. Want my E8400 fry? I can do 3.6GHz for benching purpose though, I'm getting CCF from bro tkh .

Yes, cause the 45nm release lesser heat thus don't need that type of heatsink. Then again, the stock is really -.-

E8400 on stock intel cooler, 1.225vcore passed 10 runs of IBT at 3gb memory. ._. guess what's the temp? lol 72C with tjmax set at 100.

Pencil mod liao lo~ this you have to check out the 4800 oc thread in the oc section. there got way more sifu .

Light OC to 3.6GHz, but... the GPU score lower than before

[attachmentid=632769]

Max temp for running the CPU 58/56. Not as high as I expected. Was 72/72 when I ran the IntelBurnTest ._.

LOL, something weird. I decided to bench on 3Dmark06.

My processor actually bottlenecking the card at stock 3.0?

This is 3.0GHz stock.



This is 3.6GHz OC.



SM3.0 score increased!

8tvt, 3.6 -> 4.0 is going to take a lot of vcore more I think. I haven't tried though. Waiting for CCF to arrive first.

Aiya, real world performance is hard to compare. I play crysis avg this this that that. The other guy maybe playing in another level or map, starts saying oh my avg is this and that.

Something standard like this is easier .

Cause you're not using your Turbo mode?

4850 and 4870 are both the same RV770. Just different clock speed and memory bandwidth. (DDR5 and DDR3 really huge difference.)

Sad, I'm unable to OC the GC for it to work properly. BSOD everytime I bench it . Must be the PSU!

740/1120 < Used the Auto Tune function. =/ BSOD during benching with furmark06.

700/1100 stock was able to run with my proc OC-ed.

Wah, don't tell me you got already @@.

I didn't use furmark, crashed in 3dmark06 lol. driver hang ._. didn't see get the temp because the system restarted.

at stock speed, 40c/58c (loaded with furmark for 20minutes).

not sure how much at oc... later then oc... a little irritated because whenever my system restarts from a crash due to gc hang, it goes a little haywire. CCC doesn't work, sound driver stucks as well. Until i repair the installation of ccc then everything will work properly on the next reboot.

I don't know how to view inside the BIOS, but at CPUID Hardware Monitor, it shows 1.05v min (idle?) and 1.12v max (load I suppose? Just ran furmark a while just now)

owikh? he cfx 4870GS and 4850 (not GS..).

^ Similiar to my first batch 4850GS when blackscreen appear at times. What's the temperature? Maybe overheated?

Just curious, what PSU are you using?

Try playing again and see if it occurs or not. Is this the first time or you've encountered this before?

Err, that PSU. Peak load = 450W efficiency is 72% - 78%, meaning about 324Watt continuous? (Meh I hate to see PSU ratings , all manufacturer some put their true power some put peak -.-)

But I think it might be the PSU though.

Err, I recalled someone saying he could run 4850GS on Warhead/Crysis on the highest settings?

Stock clocked or OC-ed? Mine is struggling on 1280x1024 , barely hitting 25fps. AF/AA off.