nope, even the surface of the stainless steel will be oxidized over time. Didn't u notice those stainless steel gate around your neighborhood tends to be slightly dull after some time?
True Black is nice, but when dust builds up, u need to clean it lo Nothing is perfect.
U want looks or u want performance?

i want both, can i? megahalems and true black have same level of cooling efficiency right(although megahalems seems to lead the way )?

Thermalright V-Xrt

http://www.thermalright.com/new_a_page/pro...omous-x_rt.html

i hate when i already bought the stuff and another "refurbished" stuff come out after a month or so >.>

i need some advice here.
can i run the cooler master v10 without the fan shroud ala passive cooling?

i ran into some problem of space due to a miscalculation on my side. the second set of heatsinks and fan with the shroud on didnt clear the 5.25" drive cage.

i'm hoping to mod the 5.25" drive cage in a while but i need to use the pc also. i'm using only the TEC fan at the moment and have another 80mm fan which is i mounted above the second heatsink using cable ties.

its messy but the tempreature i'm getting is lower then the standard heatsink which died a few days ago.

So the Thermalright V-Xrt price will reduced?

hi guys... long time didnt post here already

kinda busy with studies these days and i apologise for not able to help out on the questions posted here cos my knowledge about tech is really poor nowadays

i hope there will be someone who are willing to volunteer to succeed this thread or maybe create a new thread and serve the LYN community better

Hi, can recommend me best cpu air cooler ranging Rm100-Rm150? And i'm use AMD socket AM2+

I asked a friend of mine to change the orientation of my cpu cooler from horizontal to vertical. Currently I'm using deepcool ice blade pro and my casing is CM690II plus. Unfortunately he said it can't be done (he said something about the cooler's mounting).

the reason I want to change the orientation to vertical is because I want to make use of the 5.25 inch bay and put a fan there thus it will aligned with the cpu cooler's fan.

my question is if I stick with the current horizontal set up and add a fan inside the 5.25 inch bay, does it interrupt the air flow?

Cooler Master Hyper 212+. Best bang for bucks I can say. Compared to Xigmatek's, Hyper 212+ has a better mounting.

hi to all the sifu here. may i know which is a good hsf for horizontal air flow for my amd wif cm USP 100 casing? my case doesn't have top air flow, can't put any fans on top. thx

Your budget bro? If around RM100, I'm pretty sure Cooler Master Hyper 212+ will be your best bet.

thx for the info bro, i've been thinking of getting tat but i wasn't too sure whether it's vertical or horizontal on amd socket

I see... I forgot how the bracket looks like. Last time I did help my friend to fix it on his mobo, but it's an Intel platform...

Thanks, i quite like xigmatek's cooler design. Which xigmatek's cooler performs best under rm150?

guys....any recommendation for air cooler for i7 930?

my casing is rv01 if that matters....

going for performance and silence

Thermalright Vernomous-X should do the frenzy on ur 930

I've unlocked my AMD 720 Be to quad core X20. Now the temp shows -265C. The highest i recorded was 2C.

Now i'm reverting back to tricore worrying my CPU will burn without my knowing while playing some games

is there any software that accurately tell u the temp for unlocked core?

thanks

Well it is normal for the temperature reading to go haywire with unlocked core
That is sort of a side effect but don't worry,unlikely your processor will burn

Xigmatek Battle-Axe VGA Cooler VD964

i got my tuniq tower extreme for rm150 a few months ago.. now they're upping it to 215, so i bought a venomous X instead