was the plugs properly gapped?

do sanding 1st to avoid paint feel off from the smooth surface easily. But it will be kept behind the glass so without sanding still ok. If u wanna do the sanding, then get the finest sand paper (i think 1500 is the finest).

Meanwhile for spray, get those sell in hardware shop "high temp spray" and i guess is about RM16/can. It's flat black in color, not sure whether is there any glossy black high temp spray available now. As rules of thumb, let each layer of spray dry in 10mins before proceed with anohther. And don't spray too thick for each layer or u'll end up with dipping. 3 layers should be nice enough.

Then u need to get the a reel silicon glue (use for windscreen) from spare part shop for sealant purpose.

Prepare the hair dryer, masking tape, sand paper (optional), old newspaper. U need to heat up the silicon glue area to soften the sealant then pull it apart slowly (like opening durian), carefull with the silicon glue and avoid it drop on the area u wanna spray.

Anyone knows any reliable workshop in JB ? I need to fix my car, i had an accident in singapore last nite, lost almost all of myfront part, but car is still drivable.

Attached some picture for reference.. lolz..


This post has been edited by GeneJin: Jan 7 2009, 09:16 AM


Attached thumbnail(s)

My front left power window is broken... i try to wind it up, the motor got sound but the window aint moving anymore. How much normally it cost to change + installation ar? I'm in kl, anywhere in puchong, sri petaling, pj area to recommend.

Thanks

just get my car back from workshop. the squeaking(not high pitch) sound is still there. the strange thing is; it only happened when the car is move from the standstill. ie; starting the car in the morning, changing to D and foot off the brake pedal.
any idea what could be the caused? should i go for skimming? already checked the pads. everything is ok.

thanks in advance

Hi everyone, busy nowadays..

Done my 4-2-1, very nice to drive, but the rear stock exhaust like tin kosong.

Sigh, i heard from my insurance agent cannot claim since i accident in SG.. ***.. now i damn piss off adi..

How come? All Malaysia insurance are covering Singapore and Brunei. Better check or you could report this to Bank Negara.

i think its because the belting(not timing belt but other belting) that belting must be tighten a lil bit then the sound gone. it only happens when cold start(when the problem is not serius la)

Maybe the glass is not connected properly to the bracket. Get it check quick, else may end up the glass drop and breaks like mine.

Already been there, end up change muffler and add another bullet.

I want to smoke my headlamp, can show me a close up pic of your headlamp ?

Here u go.

Finally, after looking for it up and down.



Might smoke my headlamp next.

---

Added on January 7, 2009, 3:21 pmThanks for the pictures, another poison for me..

This post has been edited by squareballs: Jan 7 2009, 03:21 PM

hi all wajarian,

i'm new guy here.

Using a 2003 Waja
stock standard,

but planning to do some modification this weekend,
this weekend planning to do angel eyes and m5 rearlamp, also looking for bodykit/lips around penang/prai there, any suggestion?

also in future planning few modification on perfomance and cosmetics
like extractor - LCP - Muffler - Camshaft - Rims

do give me suggestion and advise as i'm really new in this ,

Thanks ya guys,

by the way, i call this "Project B Minor" ! hehe

check your fuel tank bracket.

---

Added on January 7, 2009, 4:24 pmget those cps model bonet and bumper lo....what causes the accident?

---

Added on January 7, 2009, 4:29 pmwelcome...

for bodykit, u can get from Rock Lee (http://www.rockmotorsport.com/).
Btw, your's is MT or AT?


This post has been edited by zenwarlord: Jan 7 2009, 04:29 PM