1.4v but during IBT , the voltage drop till 1.35v+.

By using RealTemp, the max reading temp is 87C.

kinda high isnt it? lol.. hmmmm kinda hot in my opinion...

I feel used to that high temp. My macbook T7300 running at 95C+ even just run 1 application. I run it for 24/7 and until today no problem. Haha

lol.... well notebooks normally run at this sort of temp.... like my old lappie T2300E also idles at 60 plus and if loaded with occt will go up to 90... lol... well my quaddie runs at 63 when on load... so i would use urs to be kinda high... haha maybe when i get my WC kit only then i will try.....

This post has been edited by glock88: Sep 20 2008, 11:00 PM

u can fry an egg on your lappy mmm... fried eggs. but bro, i dun think u should let ur quadies run at that kind of load temp. really will shorten the life span

87C is the peak temperature. Most of the time idling at 60C and load at 70C. I believe the sensor problem because my heatsink dont even feel warm.

Now i still figuring out how the GTL work. Is it good to run GTL at *0.69 all the time?

This post has been edited by Cyclone87: Sep 21 2008, 11:10 AM

my X3320 favor 7x for d multi...
now playing with fsb oni...
my target will be 3.2ghz 24/7...
just now IBT past on 430*7...
10 loops past...

poor HSF/CPU contact maybe?

beats me on the GTL I also wanna know how it works. I will wait for your conclusive finding

Nah incase you dont know. All the 45nm conroe have temperature sensor problem. Some can even break 100C+.

It time for Biostar TPower I45.

This post has been edited by Cyclone87: Sep 21 2008, 12:10 PM

did u mean yorkfield 45nm? conroe is dual core leh btw, loving the ballistix u sold me

This post has been edited by metsatsu: Sep 21 2008, 12:20 PM

edy using I45 la abang...
need to understand d bios...
but able to pull d fsb....
need to stretch moar...

Wah abang it time to break 500FSB . Pump your GTL to 0.69 and your chipset/vcore/FSB voltage to +0.4v .
With 0.63-0.67 i able to hit 485FSB .

Err probably don't need 0.69 to hit 500FSB la. I can get 500FSB at 0.67.

hmmm gtl reference stuff... i still dont understand what's its for... lol.... maybe will try more when i go back next month... hahaha anyways... do u have to pump the nb and fsb vtt to achieve higher clock?? it seems to me i have to pump my nb and vtt to around 1.33 and 1.30 for my maximus for stability.... hmmm that also only 3.0 Ghz for my x3320

Yep quads require more voltage on the NB and Vtt..it's normal.

bro, post ur full setting r...

some update....

by the way, what sort of idle and load temp ur getting?

load on 56c....
idle on 33c...
ok ka???
bro, share ur setting lor...