Hmm that's weird. Mine says 1:1. What if your FSB and DRAM speed?

look at this...

Anyone w Q9300/x3320 overclocked to 3.6GHz??

Mind to share the setting?
Thanks

-pWs-

Wah weird. Have you tried all the settings under the FSB to Northbridge Latch? One of them should allow you to set 1:1..

---

Added on September 18, 2008, 2:18 amPws - I have benched at 3.6Ghz, but it needs a lot of Vcore. My settings are in this thread also, a few pages back.

This post has been edited by zer0hour: Sep 18 2008, 02:18 AM

Roughly how much vCore, bro??

-pWs-

Around 1.4v for Prime, 1.45v for IBT stability..

tot 1.4v its 3.75ghz stable and 1.32v 3.6ghz stable..or its been 1.4v idle?

Okie. Thanks bro

-pWs-

Ooh you're right..I messed up and forgot the settings.
1.28v 3.6Ghz is Prime stable, 1.32v IBT
1.4v, 1.45v 3.75Ghz. Also both GTLs have to be at 0.67 for 3.75Ghz.

Sorry pws =p

hehehe np bro jus realize it
btw pws how high u oc now?didnt go 3.6?

will try more and more....
kinda interesting the setting...
make me thrill...

No problem bro.
May I know how you view the vCore?? The vCore you stated is set in BIOS or vCore viewed in CPU-z??

Trying hard bro.

-pWs-

this two arrr...maybe i'll try it someday...

The Vcore in CPU-Z. Vdroop with this board is crazy high..

Any way to know the exact vCore you set in BIOS??

-pWs-

Not that I know of - besides reading it manually yourself in the BIOS la =p

Ermm... I meant how much vCore you set in BIOS for 3.6GHz.
Want to know how much vDrop & vDroop.

-pWs-

Ohh I see - nope sorry I didn't keep a record of that. The BIOS settings are saved on the I45, but the board is in my gf's PC..

I just change my motherboard to TPower I45 this morning. Overclocking on X3320 seem much easier

In 10minutes i hit 3.6ghz with this setting. But i not sure is it suitable for 24/7 run.

FSB : 480MHz
PCI-E Clock : 101MHz

VCore : +0.250 (1.4V)
VDIMM : +0.200 (2.00V)
VChipset : +0.225(1.325V)
VFSB : +0.300 (1.4V)
Core1 GTL Ref : 0.63*VTT
Core2 GTL Ref : 0.67*VTT
MCH GTL Ref : 0.64*VTT
PLL : 1.5(stock)

Seem like reducing the GLT Ref or Vcore will give me error during IBT. Perhaps later will try break 500FSB wall.

This post has been edited by Cyclone87: Sep 20 2008, 12:32 PM

when using 1.4 Vcore ah bro... what is the idle and load temp???interested to know... before i also increase it to that kinda vcore... hahaha