glad to hear, urs goes well already



hmm but mine went well with cydia, installer + 800mb root partition, but my fren's phone have the same problem like urs

well from the day i got my iphone ive been keyin the numbers as +6012xxxxx and i guessed it works on me and dont have to add appsupport...i read it somewhere long ago it was one of the way done before Appsupport was out hehe

nice..would need more repo for Installer..

---

Added on August 10, 2008, 7:53 pmGlad yours working well bro...welcome to 2.0.1

This post has been edited by Corvinux: Aug 10 2008, 07:53 PM

Manage to create custom firmware. Now, how to restore it? If with iTunes, it doesn't work.

acbc..head to this link below.

http://www.iclarified.com/entry/index.php?enid=1572

This post has been edited by davidgary73: Aug 10 2008, 08:13 PM

Alright, guys. Simple answer and solution to your dilemma which has already been recognized by cmw, WinPwn's creator. Basically, the whole crashing situation when trying to build the custom IPSW is caused by the problem where the addition of Installer into the root partition increases the total size to beyond the default 500MB capacity limit, therefore the root partition cannot be created successfully.

To solve this, make sure you resize your root partition to a minimum of 550MB before attempting to build the IPSW. After this, I personally gurantee that the IPSW will create just fine And no, this has nothing to do with a corrupted setup or bug in WinPwn, just an oversize issue with Installer.

Good luck all! Already enjoying the 2.0.1 goodness

---

Added on August 10, 2008, 9:01 pmSame for you guys It's not so much of a bug in WinPwn, give the fellow a break. Installer just makes the Applications folder too big to fit into the default 500MB root partition. Just raise the notch up to 550MB and you can have both Cydia and Installer just fine.

This post has been edited by Samanoske Akechi: Aug 10 2008, 09:01 PM

Then how do u explain that when i re-install back winpwn, i can create the IPSW that contain Cydia+installer+boot neuter with just 500mb root partition? Now I don't have any problem creating the IPSW file either its 550mb or 500mb of root partition. I've run it in debug mode and it didn't throw out any error while experimenting with different combination.

The error 6 in itunes might be cause by the root partition. Thats just my opinion coz it have to deflate all the package in the IPSW and we all know that cydia is very big in size.

@Samanoske Akechi
Care to share the source that state it caused by the root partition resizing? Coz its not in the winpwn website. Maybe I didn't google hard enough.

Doesn't work... kept getting An unknown error occurred (6) all the time. Any ideas?

Ok confirm already (after making my phone the white mice). Error 6 is caused by the root partition size. If you want to include everything i.e cydia, installer, boot neuter and custom boot logo, you have to increase the root partition to more than 550mb (as recommended by samanoske akechi). If you want cydia only then 500mb of root partition is enough.

So ... what does that mean ?

Trying to recreate with 600MB partition. So far so good. No crashing or creation errors.

Update: Error 6 again!

I'm giving up this shit and going back to 1.1.4 where it works fine.

This post has been edited by acbc: Aug 10 2008, 10:15 PM

@acbc
Did you pwned itunes and did u restore in DFU (blank screen)?

frozzbyte,

Yes. As per instruction from iClarified.

Now, I'm stuck at Recovery Mode... can't get back to normal mode.

This post has been edited by acbc: Aug 10 2008, 10:33 PM

I assume u have the latest itunes.

Ok then do this.

1. Open winpwn 2.0.0.4
2. Search for iPhone1,1_2.0.1_5B108_Restore.IPSW
3. Open IPSW Builder
4. Tick Cydia + Installer (optional) + YouTube Activation
5. If you have custom image then sellect it.
6. Leave custom payload alone
7. Activate Phone only.
8. Resize partition to 550mb.
9. Build ipsw
10. When finish creating ipsw, click iPwner again and select the CUSTOM ipsw file, not the stock one. This is just to make sure itunes is pwned.
11. Close winpwn and open itunes
12. Put phone into DFU modes. This you have to figure out how but basically the screen is black without anything and itunes recognize it and ask to restore.

Try that and report back.

Problem now is I'm always stuck at Recovery Mode (connect to iTunes) screen and no way to set it back to DFU besides restoring to 2.0.1 stock firmware.

ok its easy. Just simultaneously press the power button + home and count to 10 secs. Then release the power button and it should be a blank screen and itunes detect its in DFU mode.

Doesn't work either. Always kept getting Recovery Mode.

@acbc
Do you have YM or MSN? Would be better guiding you in there than posting it here, takes time. Just PM me.

U got PM.

This post has been edited by acbc: Aug 10 2008, 10:50 PM

hi guise,

i've successfully upgraded to 2.0.1 using sleeper's guide
http://sleepers.net/news/2008/07/25/winpwn-20-guide/

now its time to explore the app store =)

How is 2.0.1?any problem?

i also face the same problem with acbc...coz i mistakenly update to stock 2.0.1....before this i was on 1.4