How much would a cheap wax applier cost? My knuckles and fingers are screaming at me for abusing them too much every time i wax/polish my car

HI xDjWanNabex
there are many variety of waxes - patse - liquid but as for me i love to use spray

mostly requires lots of elbow grease - if u applied too much & much effort required to removed the residue - & you have to watch out for plastic , vinyl unpainted area of the bumper or car...otherwise u got another issue to remove

so easy that i can wax a whole car in 5 minutes & i can do it so often - easy effortless & effective




and i washes my car in 15 minutes without getting the floor wet too

How do you wash a car without the floor getting wet?

No water? lol!

I was talking about the machine that spreads the wax on the car.

are u referring to this
wax applied prior polish


on rotary???


aiyo yo sami


WHY MALAYSIAN never learn ????? turn over any bottle of wax - they do not recommend or says it shall be good to be polished by rotary - & where any road side fella just wacked yr car & gives u this

1st area Wax with china make rotary???

hologram was visible once we remove the wax

results unveils -
results base on the level of correction, gloss restored & clarity with depth

1st area
wax with machines

lack of correction & gloss & very little clarity

2nd area consumer (OTC) product with DA

better but lack of clarity & definition

3rd area Optimum hyper spray compound with LC cutting pad with makita



lastly
the 4th area - done with optimum hyper spray compound through out till finishing - with makita
wool - cutting pad- polishing pad - finishing pad
one product finish


a compilation picture



for a full elaborated course pls check out here

KC brother you put poison again.
look a like the product look good!

KC brother, just manage to call you just now, will schedule to meet you on JAN 2011, alot of question to ask from you.

1 ONR and can give me the spray bottle?i saw u spray it use it for clay.

This post has been edited by fbong: Dec 27 2010, 02:14 PM

Guys, how u all deal with bird droppings.
?
wipe it off with a bit of water definitely going to leave scratches on the paint..

hi KC,

Im very new to detailing. My car is white in color. Well, i got followed the way how to wash a car. Since i bought my car from previous owner, there are a lot of tiny black spot which is very very hard to remove. I guess is those tar spots. Any recommendation from you?

straight away clean it - i carry a bottle of QD make of ONR in my trunk

spray & agitate it prior wiping off with micro fibers

do not use force - always use plenty of water

if it is a hard stain - i will power clean & prolong left - damaged yr Clear coat

no worries...get a clay from jusco & some onr as lube - clay them off & after that u would love it

claying guide pls refer to hrere

thanks man. hopefully the clay can remove those tiny residues because i really love whitey shiny white colour .

This post has been edited by taufufa: Dec 27 2010, 10:05 PM

During yesterday free time, i have spend some of the time to do the scratch touch up for my family car. The tools needed for this job are:
Sanding paper
ONR mixture for
rubbing compound
the touch up paint
the wax & silicone removal

this is the picture of the damage



as shown in the picture the scar already fill with the touch up paint by some other fellow and i am not satisfy with it and today i will try DIY.

First wash the area with ONR mixture and then i wet sand the affected area by using 1000G, 2500G,3000G with ONR ad lube.



then wipe dry and remove the sanding marks by some rubbing compound. after the sanding marks is remove then i use the Wax & silicone removal to wipe the area clean the area, the purpose of using this is to ensure that the surface is well prepare for the touch up paint to bond better.

this is the picture that the touch up paint is applied, i will leave it cure for one day then i will compound again this is the after picture


result:
although it is not totally like new but i am happy that the diy is better then the job done others.

I don't understand what's that

bro congrats - very very nice le
but be very very careful when sanding
mainly u do not know how deep u sand & otherwise - thinning the CC is hazardous to yr paint

I would suggest using - turpentine or mild thinner - rub & rinse off immediately = do it carefully


or use compound...careful at times u rub it too hard & over strength & smear off the paint
\nevertheless you did it well


i carry a bottle of QD make of ONR in my trunk[SIZE=14][[I]

bird shitting


for contingency & emergency

ONR 2 ounce dilute in 600 ml water








i just wash this car with 2 & ta da in 7 minutes


This post has been edited by KC's: Dec 28 2010, 10:16 AM

Hi bro KC, where can we get some Meguiars mirror glaze or Maguairs M series products? those are for polish the surface?

thx for ur advice kc i will try to use ur ways next time on the other side of the wheel arch

This post has been edited by tomatoes: Dec 28 2010, 02:24 PM

what series of M are exactly is looking for ? , polish , compound, LSP....all of them start with M

What is ONR?

Optimum No Rinse. It comes in the form of spray bottle FYI.

read more here
budget of pic up for the day liow

here


thanks buddy

Hi bro KC, i also dunno which Maguire.. but i need to find something that can clean up those stubborn stain and scratches after i wash my car.
Because even after i wash the car, i still can see a green/grey layer of stain on the clear coat which cannot be clean up.

Now i send it to the car wash center, after they wash clean the car, they will help me to polish with some white compond + micro fiber cloth.
They just put some white compound on the micro fiber cloth and the wipe on the car surface..

After polish, the grey layer gone and the clear coat become shinning & smooth, and then cloth become very dark. Do you know what compound is they use?

What product should i get?

This post has been edited by yehlai: Dec 29 2010, 01:45 AM

HI
thanks buddy for sharing with

i would be very much interested if you could do u a favour by :-

i. gives us a pic - before preferably or check out from my blog to do yr archive....so that we know what exactly u r facing

ii. u may also ask the car wash what they did for u

iii. observe this area - see whether it resurface after a few months



bro yes a sudden transformation could take place but how long will this gonna to last of you continue to sent yr car to the wrong hand to get wash & get thrashed