K&N? u mean hw?..any pictures?..putting new filter right?...what about the original campro airfilter?

You want pickup? Change to a tuned length header, the rest you can maintain if you want, definintely can feel
Air Filter if drop in alone, negligible only.

whats the reason?..lol...i try to find all display good view....damage the engine ah? what damage?

Google around for picture. I'm using drop-in, so still using the standard airbox.

Changing air filter does help with pickup, but for the amount of money spent, extractor (header) will give more improvement (rdon't forget to remove cat-con also ). But if change extractor and de-cat, you will need to change the muffler (optional though) as the sound is less bassy, like empty can when accellarating hard .

---

Added on October 5, 2008, 11:08 amWaste money. Try to read review not from their site,

This post has been edited by sphiroth: Oct 5 2008, 11:08 AM

Like I said, negligible 1 as header alone u can definitely feel the pull
The rest can mainain, as for high revs, the Campro engine is freaking niosy

Sphiroth, a lot poison from each of your post.

well..i visit k&n filters website..which should i put? stock airfilter or the add on modify 1? how much on every item?...

This post has been edited by loong2020: Oct 5 2008, 01:29 PM


Attached image(s)

tips ... try reading and understand how surbo works....

There should not be much difference in price between both types. But drop-in requires no extra cost/mod, just plug n play. The open pos however need extra piping, heatshield, and also CAI to works optimally, which translate to added cost. But in return, you got more hp and 'cool' looks.

i heard alot of complaints of missing stuff during the shipping. don't have any SC over in KK?

---

Added on October 5, 2008, 4:32 pmphysologically improve only.

---

Added on October 5, 2008, 4:34 pmmodding in and out flow only able to give u improvement.

---

Added on October 5, 2008, 5:23 pmok guys, here is some photo of blacken fog lamp.

tools:
hair dryer, (-) screw driver, silicon sealant (similar sealant use for windscreen), old news paper, masking tape, high temp flat black spray.

before


use hair dryer to heat it up, then use (-) screw driver to push the rear casing up. do it slowly.


masked it with news paper and masking tape.


after spary, apply new silicon sealant and heat it up again with hair dryer. cover the front glass back and ensure all area is porperly closed.. Use plyer to clamp a little (remember not too hard else you'll craak the glass).


tada.....on my car now.




This post has been edited by zenwarlord: Oct 5 2008, 05:23 PM

hope for more DIYers to share their work... good job zenwarlord

mayb i know what is the use of the black plastic thing behind the pedal?..izit the speed limiter?...can be remove ah?


Attached thumbnail(s)

remove it, you'll like it.

serious?..what is that actually?..tried removing it but cant...what type of screw driver?..philips?..cant turn wei...hw?

what to do. no other option. but at least my car kept in kontena, costing rm 7.9k (luckily paid by gov). i heard so many case of missing stuff but in most of the case, the car kept in open area. actually there are sc in sabah but it doesnt matter since ive already transfered here.
btw, really nice looking fog lamp but i wonder signal lamp is clear enough

try to find shorter screwdriver. or else u can search for flexible screwdriver that can be bend, cost about rm30

How about air ram? The one with turbine in it...

Just change my driver seat to sscus bucket.. Got it free. Actually it is a pair, but just install drive seat only.. It has tensional adjuster, for vertebrate support...

---

Added on October 6, 2008, 8:07 amI'm using redline.. Cheaper, but ok...

This post has been edited by pearjar: Oct 6 2008, 08:07 AM

still remember that our's is drive by wire? that is the reason.

---

Added on October 6, 2008, 10:32 ami thought of bad signal light as well, so i spray a few more layer to make it as shinny as possible since it's flat black quite difficult to have that finishing. The reflection is good only a little dimmer but not so noticeable.

you transferred to Penisular? where u stay now?

---

Added on October 6, 2008, 10:37 amthe reason we mod to use the low restiction filter is bcos we need faster air entered of throttle body. If there's turbine inside the air ram it create restriction again lo.

WHAT? free SSCUS? you're so lucky la....

This post has been edited by zenwarlord: Oct 6 2008, 10:38 AM

Remove that thing and attach it to steering wheel. Can use finger to accelerates.

I also want a bucket seat. But to trade with the standard leather make me think twice..

will there be any improvement if we remove it? I'd probably try it when I get back to Seri Kembangan (next week...*sigh*...)

if u ask me then i'll say remarkable improvement.

Only thing need to be cautious is your floor mat or carpet, ur accelerator pedal might got stuck and can't return when u let go. So make sure u have a good clearance when u floored the pedal.