How do I then automatically download multiple files, one at a time from sites like rapidshare, hotfile and megaupload without a premium account?

You can try synology with 4 or 5 HDD model and expandable. You need to plan carefully in order to safe guard your data and future.

My office is using Synology ds107+ for data keep. My singapore branch office is using synology too.

You need those premium account. Without premium, it will download only html file.

-pWs-

Wah, bro pWs, you very rich. Got all the direct DL premium account.

No bro. One account at a time.
Just testing.

-pWs-

Hei, have you notice that the synology have a wifi setup to your wifi modem router? I just found out when install new firmware to my NAS and read the new manual.

You need to stuck a wifi doggle to the NAS usb port and configure it. Your wifi router should be able to detect it.

Now you can place your NAS anywhere without network cable. I wonder how fast the speed will be.

Which brand of Wifi Adapter should get ?

Sorry, I didn't check. You got to go to the website and check the wifi doggle compactible.

I have 1 ovislink wifi doggle. But did't try to set it up. Cause I think the speed won't be that fast. Unless go for N type.

The wireless dongles that have been tested on the Synology Product are listed as follows:
Brand Model
AboCom WU-5204
AirLink101 AWLL6090
Asus USB-N13
Belkin F5D8053 v3
ConnectGear WU260N
D-Link DWA-140
DrayTek Vigor N61
EDIMAX EW-7711UAn
EDIMAX EW-7711UMn v3.0
EDIMAX EW-7711USn
EDIMAX EW-7717Un
SMC WUSBS-N3
Sparklan WUBR-501
TRENDNET TEW 664UB

BTW, please upg to the latestfirmware.

---

Added on June 28, 2010, 2:06 amif you are looking at how to migrate your synology NAS data from old to new, you can PM me or call our support centre 03-2143 1823 or email to sales@midispecialist.com , I will call you personally.

BTW, this is free service for synology NAS user.

---

Added on June 28, 2010, 2:08 amwe do have some old / 2nd model NAS :QNAP / Synology to sell, please call us : 03-2143 1823 or facebook : midi specialist solution

---

Added on June 28, 2010, 2:10 amSynology will only cover the Hardware.... as well as you don't burn the Mainboard... ofcouse please keep the original casing (heheh in case u need it)

---

Added on June 28, 2010, 2:13 amin fact, synology will release major firmware upg : march and Sept every year and minor firmware upg from time to time.

For example, until today, they still release firmware for year 2007 NAS product , model lide DSx07 series.

which I think is good for money.....

This post has been edited by denhock: Jun 28 2010, 02:13 AM

Thanks for your help.

I manage to transfer the file from old HDD to the new HDD by try and error. Lucky the file is still there inside the old HDD when make some mistake. Take me alot of time and till now still haven't finish migrate.

I don't have experience in linux with their file type like EXT2/EXT3. So panic me when I can't see my HDD in win xp while connect as externer. After learn some linux EXT format and dl the software to read it, manage to takeout the file and transfer to new HDD.

if you just want to transfer file.... u can use the File Station function in Synology. this is a web page interface, u can drag and drop your file from local HDD to NAS or from folder A ( in NAS) to folder B ( in NAS) , this is same your time.


due to the limitation of browser , it only allow to upload file size less than 4GB (single file) for Mozilla and 2GB ( single file) for IE.

But I feel the web base file transfering speed is a bit slow beside the file size limitation. I use FTP client to transfer which more faster speed. Or map the drive and use explore drag and drop. Which too is fast compare web page interface. I use web page transfering when I far away from the NAS.

My migrating is less problem and faster if I have an extra HDD to transfer all the file from the old HDD. Which I can transfer back to synology NAS after upgrading. But I don't have an extra HDD. The synology file system is ext3 raid type which make me difficult a bit since I only know windows base.

To transfer back the file, I need to convert the partition into image file and store into the NAS. The image file is over 700GB which I don't have an extra HDD to store it. That converting and transfering take full 24hr. Than next I need to mount the image disk and open the file to extract it out one by one into the NAS. That is why it take so long time.

hi, anyone using Acer Aspire easyStore H342 as NAS? any personal review? many thanks

any sifu try XTREAMER NAS E-TRAYZ II 2-BAYS?

err...then how as most of the files are more than 4GB?

than need to use samba /ftp.... to transfer the big file ( > 4GB) ........

Hi denhock. WTA,

I am facing some problem with network backup over internet with synology NAS. It seems like not working with both backup to synology server or resync compactible server. Here is my setup.

DS107+ in office and DS409+ at home. Both Network backup enable and showing NetBackup folder in the directory. When doing configuration in the backup system till the end, it will show this error nessage:

"Connection failed. Please check your network setting" or " Failed to connected to the destination server"

I ve tried with few server or ip data enter:

http://servername.xxx.xxx
http://servername.xxx.xxx:5000
servername.xxx.xxx
servername.xxx.xxx:5000
ftp://servername.xxx.xxx
servername.xxx.xxx:5000
http://xxx.xxx.xxx.xxx
http://xxx.xxx.xxx.xxx:5000
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx:5000

All fail to connect. Can you guide me what is the correct way to configure the network backup?

did u open port 837 at your router

Note: for off-site backups, the following ports need to be opened on the remote DiskStation ( both party)

* 873 = Data Channel
* 22 = Encryption Channel, if used

about the server name or IP: you can

1) servername.xxx.xxx
or
2) WAN IP for the remote DS.

u can try to use the WAN IP of the remote DS first and if work than u try the servername.xxx.xxx


BTW, did u set any rule in Firewall ( in the DS) ? if yes, please enable the access right for the network backup as well as remote backup.




This post has been edited by denhock: Jul 2 2010, 10:08 AM

Thanks for the feedback.

I was able to backup the file to my home NAS from office. But haven't try it out from home to office. It seems like the problem is from the open port 873 or 22 in the router. Both router party have been port open with this 2 no. No error so far.

Damn why the manual didn't mention about this port open.

actually, synology keep on add in few feature and all this info will not be able to update on time as well as all the info put into the user manual,

is u like to know more, please visit SynologyWiki... which contain more info about synology product


Welcome to SynologyWiki link.....

This post has been edited by denhock: Jul 7 2010, 11:56 AM