would like to ask for advise,

for a approx 500 sqft living room + dining room (linked)....is 2.0HP air cond enough? or we need 2.5HP?

Want cheap air-con for panasonic, york, acson or samsung go to the shop at Serdang. Selling dealer price

Which Legend's did you go to? U should go to SS@ branch. PM me for a contact inside. He should be able to give u a good price. Ive bought alot of electrical products from them since 2009.

yeah that is in my mind also, bigger HP pipe can use for smaller HP aircond, but not the other way.....so just asking anyone have similiar experience.

another thing is my living room ceiling height is about 9ft, and the total enclosed living+dining area is roughly 360sqft (12ft x 24ft = 288sqft rectangular area for living+dining, and another 14ft x 3.5ft = 49sqft for corridor to bedrooms, and a small 24sqft for main door entrance attached living room, so total 288+49+24 = 360sqft space)

I search some online BTU/h calculator and found 2 type of answer, some calculator give me roughly 12000+ BTU which means that i need to put a 1.5HP ac, but some website give the calculation like 360x60 (60 is like a 'miracle number to calculate the BTU figure) = 21600BTU which means i need to put a 2HP ac.

the price between 1.5 and 2HP ac really differs a lot (~rm600+), therefore i am confused whether which HP to choose.

FYI ,my kitchen is separated from this area by glass sliding door, and there is only 1 side (roughly 12ft length) of the wall (which is actually a glass sliding door to balcony) is facing South direction. My usage for the ac is only daytime can give me 22-26degC cooling, i am not going to put the ac temperature to below 20degC (like I am staying in north pole,hahaha).

So i really need you sifu-sifu's help about the HP figure....

Quoted by the aircond guy my electrician recommended.

Panasonic CSC-9MKH (Eco-navi) RM 1180 include installation and 10" of piping.

For aircon sizing, you could try looking here...

http://www.energystar.gov/index.cfm?c=room..._properly_sized

Btu/h                  9,550 (2,860 -11,200)
kW                  2.80 (0.84-3.28)
Power Input  760W (225-920)

Any 1 know calcuate the running cost/Hour for 1HP aircond?

Let say the unit price 1KWH = 0.40.

guys..my area roughly about 437 feet..thinking about hitachi 10k btu 1.hp..izzit enough.

thanx

any recommendation of aircond with 1.5-2.o horsepower and must have small compressor?

thanks

Any new generation 1 HP split unit aircon can be connected safely to the 13A (provided it is not shared with heavy appliances like Oven, heater, etc)

Thx, Kelvyn.

I would not share it with other appliances but I won't know if this particular outlet is tapped from other outlets or directly from DB.

Anyway, I will choose one with lowest starting amp, Panasonic seems to have one with 3.6A.

Hi guys,

I was wondering when these air cond sellers say that their air con price include 10 FEET COPPER PIPING, INSTALLATION, AND WIRING.

Does this mean than the copper pipping and wiring would be concealed?
Will they hack the wall and conceal them?

Just doing some survey before i start enquiring.

Any advice would be much appreciated.

can trade in 3 old AC for 1 brand new AC FOC or not? 

Then if we want it to be conceal, will those installer able to do it at extra charges? Or we have to rely on contractor to do it?