iPhone 2.2
Instructions by Maverick Wil (POST)

1. Is your iPhone jailbroken? If Yes, proceed to 2. If No, check 1A.

1A. You need to jailbreak your phone first. After that you need to set up SSH. Instructions for jailbreak and SSH are available on the first page of the "iPhone for Dummies" (link) under item #2 and #14 respectively.

2. Download the "Default.phoneformat" file :  Default.phoneformat.zip ( 9.47k ) Number of downloads: 702


Alternative links : link 1 - frank8, link 2 - icebrew, link 3

3. Already have an SSH client (Winscp/Cyberduck)? If Yes, proceed to 4. If No, proceed to 3A.
3A. Download winscp for windows, cyberduck for mac
( http://winscp.net/, http://cyberduck.ch/Cyberduck-3.0.1.dmg )

4. Transfer the "Default.phoneformat" you just downloaded into your iPhone directory under " /System/Library/PrivateFrameworks/AppSupport.framework/ " using any relevant SSH clients.

Optional : Backup the original "Default.phoneformat" file in that directory first if you want to but it is not necessary.

5. Close the SSH program. Reboot your phone.
- Manual way : Hold on the iphone power button until a slider comes up, slide to off. Push power to on again.
- Automated : Using bossprefs or sbsettings press power and press reboot.

iPhone 2.1 and below
Instructions by Siawgu

Instruction for automated approach :
1. Open Cydia, select Localization.
2. Select Caller ID Fix Collection (ispazio)
3. Install, restart springboard.
4. For good measure, restart your iphone.
5. Done.

Instructions for manual approach :
(Download the attached zip file)
1. Open Cydia, select All Packages, Download OpenSSH.
2. Restart iPhone. Make sure wifi is on and connected to local router.
3. Go settings > Wi-Fi > Your connected router (Select the round arrow beside it)
4. Find the Ip address. Copy it down.
5. Download winscp for windows, cyberduck for mac
( http://winscp.net/, http://cyberduck.ch/Cyberduck-3.0.1.dmg )
6. Install and run winscp, cyberduck.
7. Insert the IP address you previously found into the Winscp/cyberduck config window
8. username : root, password : alpine
9. Use winscp/cyberduck, go to "/System/Library/PrivateFrameworks/AppSupport.framework"
10. Unzip the file you just downloaded, and replace that file in the directory.
11. Restart iphone. Done!

This post has been edited by wahkiz: Nov 27 2008, 09:53 PM


Attached File(s)
 PhoneNumberTemplates.plist.zip ( 3.35k ) Number of downloads: 1026

yup... i'm having the same prob as well...
downgraded back to 1.1.4 becoz of the caller id no fix yet...
hope someone can help us here >_<

Here you go.. I uploaded this afternoon..
modded the plist to support Malaysia tel no.

but before you can uplaod you need to install OpenSSH into your iPhone..

LINK

This post has been edited by siawgu: Jul 21 2008, 06:49 PM

Thanks siawgu!! This is confirmed working on my iphone.

Just incase anyone else is searching for this and is wondering how to go about the process, I have updated my first post.

how to ssh using mac?

Install OpenSSH on your iPhone using Cydia the same way everyone else does. The on your Mac, download either Fugu or Cyberduck from the following links and use it the same way WinSCP works in the tutorial above. Good luck!

http://rsug.itd.umich.edu/software/fugu/fi...2.0-English.dmg
http://cyberduck.ch/Cyberduck-3.0.1.dmg


P.S. Hey Wah Kit, remember me? Tim from Elecom? Glad to see you here, mate. Great tutorial

This post has been edited by Samanoske Akechi: Jul 21 2008, 08:11 PM

Hi Friend i only get a doc with index.php.Could you please upload windows format.Appreciate it

---

Added on July 21, 2008, 10:34 pmAppreciate a windows version please

Thanks

This post has been edited by hussain: Jul 21 2008, 10:34 PM

w0ot.. tempting
1 of most important apps for iphone

Yeah bro...just got to 2.0.One of the first thing i came across.So sad i deleted my old file.Also got popup call forwarding active dismiss.Before installer all got patch.Cydia nothin there man

nice, i was having the same problem. i will try this now. Thanks btw

please please pretty please can someone upload the windows version.
.plist

ive been the situation last nite
after a while, less than 20minutes i think, i revert again to 1.1.4

I am sure some of our sifus out there can convert and upload the file.It was done earlier when iphone came out ma

Guys, a Windows version of what? An SSH client? That'll be WinSCP as mentioned in the first post.

As for the .plist, THAT'S the only version there is. All you have to do is upload it to the right directory in your phones, no editing or amendments required

i feel so dumb...thanks guys

i cant find directory folder in my phone where izzit?

woHooo!! im pwning my phone with home cook-ed 2.0 fw via h@ackintosh
hope all running smooth

---

Added on July 22, 2008, 4:53 pmerr im confuse.. after unzip the file.. am i have to paste the "PhoneNumberTemplates.plist" folder to the ../AppSupport.framework OR just the .plist file?

TQ

This post has been edited by gengstapo: Jul 22 2008, 04:53 PM

just the plist file to replace the existing file inside the folder.

finally found the folder.

This post has been edited by Dante18: Jul 22 2008, 09:51 PM

kewL.. its working now

TQ

i tried everything, but now its getting worse i cant even go into sms and calls. shit pls help me

---

Added on July 24, 2008, 12:42 amokay i give up! i dunno whats wrong with my phone, i did exactly what i am suppose to do. The result was whenever i tap on phone and sms it jump to the homescreen!

This post has been edited by takanor1: Jul 27 2008, 04:42 PM

Ohhh i love ziphone

I'm having exactly, the same problem as this guy. Thank goodness I backed up my old plist file.
Anyone else having this problem ?

Hmm it seems that it works for some and doesnt works so some.

This is weird.

do you backup'ed your original plist? make sure it do..

The iPhone will jump back to your Homescreen is becos the plist is not readable or corrupted.
maybe you try to reupload the plist to the directory and reset your iPhone.. That's what i did.

i found after upload the edited .plist, need reboot manually & not from ssh command. else it wont works.

this happen to me, dunno for the rest

I think should be no problem i oredi unlocked 3 iPhones to 2.0 and uploaded this plist.. and it works..

This post has been edited by siawgu: Jul 24 2008, 05:51 PM

Hi guys,

Wondering whether it can be done on FW 1.1.4?

no need la, there is appsupport for 1.1.x already & can be d/load via cydia or installer..

In Installer,

1. Add http://installer.iClarified.com to your Sources list, then refresh.

2. Under the new "iClarified" category, select and install the AppSupport Patch (1.1.4).

3. Reboot your phone and DONE!

Thanks man for this tip! Helps a lot!

is the uploaded file corrupted ?

i tried downloading it & view it by wordpad

it seems like it is showing in unreadable format, i cant understand it.



i did reuploaded the plist & reboot the iphone
but the result is still jumping back to home screen when ever i press call or sms

---

Added on July 31, 2008, 10:53 pmany help ?

This post has been edited by yewfatt: Jul 31 2008, 10:53 PM

for Iphone firmware 2.0 u can replace with the PhoneNumberTemplates.plist at /System/Library/PrivateFrameworks/AppSupport.framework/

or those who deleted the old PhonenumberTemplates.plist u can download it from here http://cbisu.wordpress.com/tag/iphone/

i suggest dont delete/ replace. just rename the ori PhonenumberTemplates.plist with .bak extinction or anything u like
then, copy/ upload the modified PhonenumberTemplates.plist to the correct folder

ps: if anything gone wrong, u still can restore the ori PhonenumberTemplates.plist IMO

Phew...After 3 hours...Manage it get it done!~
Thanks for the info...

You JB your iphone ?

yea... you JB your iPhone 3G ?
Is it by default the contact's name won't show up for iPhone 3G ?

Or that happens only after u JB ?
Pls clarify further... TQ.

afaik, this only happens to places where iPhone is not scheduled for launch...

so yes, iPhone 3G won't show the contact properly by default. and yes, he jailbroken his iPhone 3g

Psyeo,

Really ka? Hmmm..that's weird wonder what's the logic behind this where only happens in countries where iPhone is not officially lauched.

@baretta
Yes, was trying...but finally i JB it.

@friends
It can show up, only appear +6012XXXXXXX for sms..
after JB it, everything it back to normal..

@psyeo
Thx for ur help today

not virgin la your iPhone. Ekekeke

huh ? no other method to resolve the problem rather than JB ?

frend, urs was the unlocked or jailbreak type?
how bout appsupport, izzit support natively, i mean does it require appsupport to display caller id?

I upgraded my iphone to 2.0 last night. the phone keep on hanging up everytime i run Cydia. aNY IDEA WHY?
By the way, i used winpwn to create custome ipsw and restore using itune 7.7
Pls help. I'm thinking of downgrading back to 1.1.4

tq

Kasmankk

No choice...without the appsupport, i cant recognize the sms...too many number in my phonebook

err... my iPhone 3g is unlocked by default, and I jailbroken ever since the pwnage tool is there.

i'm not using appsupport atm, coz i'm still in NZ, no problem with caller id thingy

---

Added on August 5, 2008, 8:07 amrarrrr, 2.0.1 firmware just came out....gonna jailbreak it again, after the pwnage tool is out for 2.0.1

This post has been edited by psyeo: Aug 5 2008, 08:07 AM

Those who want to maintain the virginity of their iPhone 3G, you will have to do it the hard way: re-edit all your contacts to add +6 at the front of all their numbers to have their numbers displayed as names. This may be unconventional to some, but to me, it is normal. I have almost as many local Malaysian contacts as I have international ones.

And my Aifontriji keep its butt cherry and its vaginal hymen at the same time too.

Long live virgin iphone..hehehehehh

refer to stringfellow post, you also can add-in the same number under the same contact. eg. Ah Beng Mobile +6012xxxxxxx and mobile (012)xxxxxxx.

---

Added on August 5, 2008, 2:48 pmjust update my firmware...the appsupport gone..
it back to normal...

---

Added on August 7, 2008, 7:31 pmguys, i have just downgrade from 2.0.1 to 2.0..
it seems like the PhoneNumberTemplates.plist doesnt feed.
after i insert it...the dial pad got no reponse and the incoming call as well..
any idea?


This post has been edited by goldieboy: Aug 7 2008, 07:31 PM

hmm doesnt seem to work for me. i tried copying the plist into the directory, then i restarted my iphone and i cant seem to get into my SMS. when i recopy back the original plist into the directory everything works again. i tried redownload TS plist, and recopy it again (more than 10 times now) and still facing the same problem. any1 can help?

^funny, really..
lastime in 2.0, just single copy/ paste, its works already
lastnite also, same with 2.0.1.. just single try, reboot, "perfecto!"

Very cool..you got it working nicely. Was waiting for this to be sorted out on 2.0.1. Thanks mate.

welcome..
dont worry, all 2.0 apps. seems to be working pretty well in 2.0.1

hi, i m just patched the file, it worked for some numbers, but it seem cant support 014, possible to fix this? thank you first.

014 kenot support? can i have the eg num. 10Q. so i can tweak it

@siawgu
What tool are u using to edit the plist file?

should be decode & edit via wordpad i think or..
use texteditor direct from mac

This post has been edited by gengstapo: Aug 11 2008, 09:05 PM

I decode it using plutil and editpad. I want to know what to edit and what the value means.

huhuu.. if u kinda free, maybe u could do some research upon em' & report something to us here?

tai kor, paiseh, i forgot to added in the 014 in phone book thats y no name display.kekekeke
thx you very much for this patch..kekeke

thanks for the tips.... looks like new iPhone users must start to get used to +6 format.
The only 'iPhone virgin' left in M'sia i guess.... ahhahaha

i'm having the same problem here..anybody can recommend some solutions?

hi, do you resize your root partition to 1GB? if not, pls try to resize it to 1gb. hope you can solve the problem, also, the intelliscreen 2.0 cant work well with 2.0.1, it always hang when i m try to enter calendar, contact..

If you do resize to 1GB, you are wasting whole lot's of space.

The max you want on the root partition is 550MB which BigBoss and many recommend that setting.

Also, u can use Bosstool to free up some space (estimating 70-100MB) on your root partition.

Cheers

hmm. no wonder i found out my root partition got 550 mb free.

i'm going back to 1.14..cant help it..

actually, for 2.0 & 2.0.1, 500mb just fine. all u need after that were the apps called bosstool, it would easily free ur root partition by moving the ringtones/ font & apps. to media partition. it would automatically create path/ route so next time when u install more apps. it would store to the media partition. u dont need to afraid anymore as long u done the relocate cmd in bosstool..

Yep. If u put to high let say 600Mb, you will end up, long time to backup.

I just update my FW to 2.0.1. All my numbers are in +6 format. But now all names are not shown. Only numbers with brackets are shown instead, anyone know how to make names appear again?

I have tried the TS patch but it made no difference. Only if I changed the +6 to (017)2232223 then only it shows names of who is calling me....
Any workaround for this problem?

How did u apply the patch? I've tried this and any numbers that i get either +6(01X) or (01X) will show the name. I think that the only workaround available. Re-downloading the patch maybe?

Try the attached. This should work even you have your contact entry phone number without the +6 front.

e.g. in your contact 012 3456789 or +6012 3456789

will match with

+6012 3456789
012 3456789
3456789

Cheers.

 PhoneNumberTemplate.zip ( 4.39k ) Number of downloads: 71


This post has been edited by gpsp: Aug 19 2008, 07:34 PM

The third option (3456789) would only work if the number uses the same carrier as you are using. Otherwise, if it is suffixed by other than 012, it would not work.

Yes I know, just for demo purposes, where last time, it used to work within the same carrier.

After reading whole thread, found others experiencing same problem, everything go back to homescreen after patched. Is it because my number is 014? Anyone with 014 number got this patch work?

ah... nop.. you got the corrupted .plist... Yo TS, can u please make another link for the .plist? mine all corrupted while extracting winzip... force to extract using winrar can but file corrupt... Or, anyone ever converted it to xml? use this converter for editings....

Converter:-
http://iappcat.com/plist/bin2xml

EDIT: Its ok... here's another mirror...
 PhoneNumberTemplates.zip ( 4.39k ) Number of downloads: 49


This post has been edited by JasLyn: Aug 20 2008, 01:19 PM

Dialing 7 digits without the pre-fix will not work anymore on digi. They're already gearing up for the MNP.

---

Added on August 20, 2008, 2:12 pm@catsper
Any numbers will work. If you have the chance to look into the plist, there's no reference to any network number, just the formats.

This post has been edited by frozzbyte: Aug 20 2008, 02:12 PM

This is what I get when I open plist in winrar. Is it corrupted?



@Jaslyn: Your file not in .plist extension.

This post has been edited by catsper: Aug 20 2008, 03:08 PM

It's not corrupted. Its in a binary format where you need to convert it to xml first. Once it's converted, you can view it using notepad or other text editor. People with Mac won't have a problem opening plist files.

The plist on 1st post is corrupted I think. I tried n tried n tried few times every single time the phone got corrupted n skip back to Home screen each time I try to use the phone. Finally samanoske akechi sent me the plist he was using n it works perfectly.

mmm ... i was using the one on the 1st page. Weird

Dunno man. After extraction, even the size of the file is different from the file that samanoske sent to me. So it must be screwed up in sum way.

mmmm .... mungkin kot.

yup first page works

Downloaded using normal windows download tools = Corrupted.. I use 3rd party DL manager (DAP) then it works....

---

Added on August 21, 2008, 10:20 amI tot i zipped it... attachement cant be sent here with winrar nor .plist extension... can only send zipped file... If u are using DAP, the downloaded file extension sumtimes only .zi instead of .zip.... what you do, just edit the extension to add "p" and you are ready to extract them... my .plist after extraction is about 6.11kb on properties and 7kb on windows thumbnails...

My first link is for conversion of .plist to xml for you to edit using any words or notepad... then its convert back to .plist... we windows user cant edit .plist rightaway... mac can.... its thiers...


This post has been edited by JasLyn: Aug 21 2008, 10:20 AM

I always use firefox to download attachment especially from people who use mac. If i use IE or safari ... the download sure corrupt la. Dunno why.

I use IE7 to download. Finally got another file that is working flawlessly. Thanks to ianho and Samanoske Akechi.

Thanks for your inquiry. You can download the file at the following link :

http://rapidshare.com/files/138946738/Phon...ates.plist.html

Just upload it to /System/Library/PrivateFrameworks/AppSupport.framework and overwrite the original file. Works for both 2.0 and 2.0.1. Good luck!

Credit to Samanoske Akechi for the link.

works like a charm! cheers bro!

Im still fiddling whether to jailbreak mine and install this or keep using the +6 nomenclature. It works fine for the time being.

just to inform, ive test as 2.0.2 & its working fine

huhuu..

thx david
followed da instruction n wallah..all ok now

i am having problem.and i dont have the older plist file.can someone please upload?thank you.the edited one doesnt seem to work at all.
help. =(

---

Added on September 8, 2008, 9:36 pmthat link shows file is missing.could you please upload your file?cause i am having the same problem now.thank you.

This post has been edited by warwickliew: Sep 8 2008, 09:36 PM

You wish is granted.

 PhoneNumberTemplates.zip ( 2.89k ) Number of downloads: 50

thanks so much for your kindness.

thank for the effort, but may i know is it work on fw2.1?

Yeah, while for me.. I'm wondering if I should go through the hassle or stay on adding +6 to all of my contacts instead.

but i reckon that it is pretty simple if you are using microsoft outlook, simply copy and paste.