Thanks bro..currently still trying to figure out the problem..i m using Muskhin Enhance Performance ram which default clock is running at 1066Mhz..so i lower it down to 667 and hence it reach 750 when i am running at 3Ghz..may try with another 667 ram and see 1st..

Lower the divider to 400.

what for.. he can set 800 instead..

Haha..tats what i m wondering..the ram speed shud be at 1066Mhz when i plugged into my mobo (Biostar TA770 A2+), the ram run at 800Mhz and the vdimm is at a default of 1.95v.. ..dun this mobo support 1066mhz ram?

I think will only support 1066 when u using a phenom with this mobo.
Either that or capable OC to 1066.

ur mobo ta770 bios date version=?

bro..newest 1..A78XA612.BST

This post has been edited by FuiLo: Jul 19 2008, 12:54 AM

can list ur rig spec..hard to know what hardware u using right now....

Ta770 do support 1066 ram (only when using phenom proc) ...and stock vdimm is 1.95v

This post has been edited by digswell: Jul 19 2008, 01:40 AM

if u on HTT 200 set the 1066 divider..(most mobo by default set @ 800)
if u using HTT 250 set the 800 divider to get 1066
this is base on 12x cpu mul..
u should try to understand the table @ first page

Thanks bro..now having a chat with bro digswell in msn..c how things go 1st..

For fun, benched 1M on 240HTT stock vcore


Able to boot and see my own CPUID at 246HTT, not even Super PI capable yet...


Loosen memory timings in hopes of stable OC? Any sifu here to help?

This post has been edited by cyloh: Jul 19 2008, 09:17 AM

now i see u reduce the HTT Link.. told u it could be the mobo limitation.. maybe can try 3ghz lol..
actually what ram u using n what's it capable of.. better show advance setting also..

Btw Phenom B2 increase voltage gives nothing?

Its more to NB multiplier... so when I lower the multi I must lower HTT link too. HTT link cannot be
higher than NB if I'm not mistaken?

Can only post until 250HTT which nets me 2750mhz.. somemore post not stable.

Erm, will show rams later tonite or next week. Working on the weekends +_+

Nope. Infact if my mobo can undervolt, I would go to 1.1v or 1.15v...

owh..hold on hold on.. it seems that im already outdated here.. everybody's talking bout phenom.. my silly rig cant cope wif u guys nemore.. dun know how to OC..haih...

@cyloh=btw, 2.7ghz wif phenom b2 is still considerable..nice clock mate..

@8tvt=saw ur siggy, when will phenom reside in that board? dun waste it..

@amdathlon.. come show us ur F3 capabilities..

This post has been edited by alive88: Jul 19 2008, 11:35 AM

Any phenom (not 9350e/9150e ar...) he puts on his mobo will fly hehe, come on 8tvt... take the dive and suffer with us

If only phenom is like F3... stock volts oc kao kao....

Cant push further lehz bro alive.Stuck at 3.1Ghz@1.25VCore.No $$ to buy HSF

3.1ghz@1.25v orthos stable? come buy my TTBTVX

o.O
Offer me lor
TT BTVX good than AC64?

yes i've touched it and not soo warm...

heres cpuZ


and DTS

and take note my balckie stock MHz!!! 5k GHz !!!wooot!!!

This post has been edited by apihblind: Jul 19 2008, 03:36 PM