Outline ·
[ Standard ] ·
Linear+
Hobbies Tamiya Mini 4wd V4, lets and go!
|
TMY kia..
|
Feb 23 2009, 11:03 AM
|
Getting Started

|
QUOTE(TamiyaAye @ Feb 22 2009, 12:31 AM) No worry dude, I exactly same as ur fate. My 1st round n 1st tried on ms pro(new bought Savanna Leo when going Pokkai) and i notice tat i put it wrong way, it fly n crush on wall sweetly... My heart break because too sudden n it is stil virgin for me... However, I directly bent it back n glue... So far it work nice...  Get another replacement N-02... the chassis not firm and stable. Add a piece FRP bumper, it can last a bit longer... QUOTE(R3Ju7Ce @ Feb 23 2009, 09:39 AM) Weeww....  Awaiting ur new orange re-juice car...
|
|
|
|
|
|
TamiyaAye
|
Feb 23 2009, 12:42 PM
|
New Member
|
QUOTE(R3Ju7Ce @ Feb 23 2009, 09:39 AM) I saw tat website describe separate bought mid chassis(silver or orange) is 10% more weightlight than stock chassis? Is it only 10% lighten? Jus feel like very light 1... Any answer from pros???
|
|
|
|
|
|
david tamiya
|
Feb 23 2009, 12:58 PM
|
Getting Started

|
QUOTE(TamiyaAye @ Feb 23 2009, 01:42 PM) I saw tat website describe separate bought mid chassis(silver or orange) is 10% more weightlight than stock chassis? Is it only 10% lighten? Jus feel like very light 1... Any answer from pros??? not much weight difference 1g+- but the metrial is different as it allows more flex from the normal chasis where it acts to absorb the vibrations from the motor gears and wheel better for more grip on the track
|
|
|
|
|
|
TamiyaAye
|
Feb 23 2009, 01:10 PM
|
New Member
|
QUOTE(david tamiya @ Feb 23 2009, 12:58 PM) not much weight difference 1g+- but the metrial is different as it allows more flex from the normal chasis where it acts to absorb the vibrations from the motor gears and wheel better for more grip on the track Wa... can absorb vibrations one... It really help alot for grip? How many %? Any suggestion for orange or silver chassis? Jus feel like orange more realiable than silver one... This post has been edited by TamiyaAye: Feb 23 2009, 01:13 PM
|
|
|
|
|
|
mini4wd
|
Feb 23 2009, 01:31 PM
|
New Member
|
New item coming out soon!!  Baison Magnum G Special  Super-emperor MS Chassis Released date: Unknown
|
|
|
|
|
|
david tamiya
|
Feb 23 2009, 04:07 PM
|
Getting Started

|
[quote=mini4wd,Feb 23 2009, 02:31 PM] New item coming out soon!!  Baison Magnum G Special remind me of fighter magnum vfx hahahaha
|
|
|
|
|
|
GL91
|
Feb 23 2009, 08:42 PM
|
New Member
|
I'm from Cheras area. Near Pandan Lake Club..heard of it?
|
|
|
|
|
|
david tamiya
|
Feb 23 2009, 09:17 PM
|
Getting Started

|
QUOTE(GL91 @ Feb 23 2009, 09:42 PM) I'm from Cheras area. Near Pandan Lake Club..heard of it? yeah i know the place but i think the wheel hard to find la long time no go cheras liao last time use to play snooker in indah snooker in pandan indah
|
|
|
|
|
|
sonic_cd
|
Feb 23 2009, 10:14 PM
|
|
QUOTE(mini4wd @ Feb 13 2009, 09:07 AM) >sonic_cd thats a pretty long but informative explanation there . only 1 problem thoug the last statement ,the 1st 4 cars are errrr... hard to find .. >>If money is not the issue, please talk to me I am letting go some of my collections. ;p i thinki got some unopened cars of that though , not sure bout it .
|
|
|
|
|
|
B-Mecha
|
Feb 23 2009, 10:36 PM
|
|
the car that i just fixed after the broken N02 Unit... any sifu can give some comment about the setting? the overall setting is base on the one in MS pro evo 1 with minor change. added the metal extension plate at the back to shorten the front and rear distance. also replaced the original roller with 6x 920 ball bearing rollers without any angle adjustment (the front seems to have some angle but just a bit, rear is 0 degree). placement is shown in the attachment. engine will be torque-tune pro or hyper dash pro depending on the track. kinda worry about the small hill part... should i add brake or this 2 little yellow ball at the back should work fine? i dont know anything about the wheel & engine & car weight combination so i hope sifus can teach me a bit.
edited: typo fixed This post has been edited by B-Mecha: Feb 23 2009, 10:39 PM
|
|
|
|
|
|
SUS-YellowSn0w-
|
Feb 23 2009, 10:45 PM
|
|
still got people play ah ? mine all sudah trashed already.
|
|
|
|
|
|
TamiyaAye
|
Feb 23 2009, 10:52 PM
|
New Member
|
Anyone think tat is worth to have a ms pro evo 1? I like it's front n rear frp. Its good if can buy separately... When evo 2 is coming? Haha...
|
|
|
|
|
|
B-Mecha
|
Feb 23 2009, 11:34 PM
|
|
QUOTE(doty @ Feb 23 2009, 11:30 PM) !!! » Click to show Spoiler - click again to hide... « cool O_O metalic version... even the chasis is metalic and it comes with transparent tires!! but will the metalic paint easily tear off after a few runs This post has been edited by B-Mecha: Feb 23 2009, 11:35 PM
|
|
|
|
|
|
doty
|
Feb 23 2009, 11:36 PM
|
New Member
|
QUOTE(B-Mecha @ Feb 23 2009, 11:34 PM) cool O_O metalic version... even the chasis is metalic and it comes with transparent tires!! but will the metalic paint easily tear off after a few runs  yeah...for display only..
|
|
|
|
|
|
david tamiya
|
Feb 24 2009, 12:22 AM
|
Getting Started

|
QUOTE(doty @ Feb 24 2009, 12:36 AM) yeah...for display only.. this car got history tell the guys how u get it and how prcious it is
|
|
|
|
|
|
david tamiya
|
Feb 24 2009, 12:30 AM
|
Getting Started

|
QUOTE(B-Mecha @ Feb 23 2009, 11:36 PM) the car that i just fixed after the broken N02 Unit... any sifu can give some comment about the setting? the overall setting is base on the one in MS pro evo 1 with minor change. added the metal extension plate at the back to shorten the front and rear distance. also replaced the original roller with 6x 920 ball bearing rollers without any angle adjustment (the front seems to have some angle but just a bit, rear is 0 degree). placement is shown in the attachment. engine will be torque-tune pro or hyper dash pro depending on the track. kinda worry about the small hill part... should i add brake or this 2 little yellow ball at the back should work fine? i dont know anything about the wheel & engine & car weight combination so i hope sifus can teach me a bit.
edited: typo fixed nice and stable setup but u need to lower your rear rollers for better stablity and this setup is for speed tracks as races held now your car setting is not suitable but just keep it for pro tour 2009 your car will get the chance to unleash its full potential in this races sample for rear roller placement
|
|
|
|
|
|
doty
|
Feb 24 2009, 01:11 AM
|
New Member
|
QUOTE(david tamiya @ Feb 24 2009, 12:22 AM) this car got history tell the guys how u get it and how prcious it is lol its a total shame due to a careless mistake
|
|
|
|
|
|
david tamiya
|
Feb 24 2009, 01:18 AM
|
Getting Started

|
QUOTE(doty @ Feb 24 2009, 02:11 AM) lol its a total shame due to a careless mistake but to me u have improved from the previous time i will be coming 15 march so i will see u again
|
|
|
|
|
|
doty
|
Feb 24 2009, 01:25 AM
|
New Member
|
QUOTE(david tamiya @ Feb 24 2009, 01:18 AM) but to me u have improved from the previous time i will be coming 15 march so i will see u again yeah...cya!
|
|
|
|
|