Not sure if DD-WRT can be used on Maxis FTTH router - Thomson TG784n v3??

No one? V1.7 version.

Appreciated anyone could help. thank you

i'm looking for modem which support dd-wrt main purpose would be setting vpn server on the modem/router which u guys would recommand?

Not sure if anyone got written a guide on configuring Unifi and HyppTV on DD-WRT but I put a guide on my site after having terribad experience by TMNutz.

http://taukeke.com/2014/10/hypptv-on-dd-wrt/

The guide is using DD-WRT on TP-LINK WR841ND and while I'm still new to computer networking (not pro wor), it is currently working and if ever HyppTV goes down, it is TM side not you if the internet still working. Call them to reset the port or whatever shit since it solves the problem.

Bloody fed up with TM who sent contractor change the router to the lousy TRG212M when I'm not around because my housemate can't watch HyppTV... while insists on charging RM120 for that stupid kotak. Still trying to return back the piece of shit to them and ask them to waive the fees. :/

For those who don't know:
Kong has stop all his development in DD-WRT due to professional reasons.

Source:
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=269247

Aww that really sucks. I wonder if it affects Broadcom-based chipset.

I know current TP-LINK router uses Atheros chipset so hope it will remain active in development.

I don't know much about DD-WRT, but from reading that thread about kong's retirement, it seems his development is more for Netgear products.

But then again, I could be wrong as I really don't know much about DD-WRT.
Don't blame me or call me noob if I'm wrong.
I only saw that thread because RMerlin (AsusWRT-Merlin firmware developer) tweeted about it.

Hi all ,
can you guys show me how to revert back to stock ?


TP-LINK 1043nd V2 currently using ddwrt

damn hard to revert
really need pro help !

if attch pic also that will be good

Follow this link, scroll down until you see "Reverting back to original OEM firmware".

For your convenience, the "boot part removed firmware" can also be downloaded from ROOter site (scroll down to "Factory Firmware").

This post has been edited by iOnicStorm: Oct 21 2014, 09:39 PM

wow dude im done successfully revert ...


Really thanks to pros

can this dd-wrt work well with
1043nd v2 + unifi + dd-wrt?

hello,

can someone help me in setting up dd-wrt for TL-WR1043ND V2?,
im using dd-wrt (beta 03-05-2015-r26446), i managed to get it work but can't connect to internet using laptop wireless, it get quite long to connect but managed to get ip address, still.., no internet. Using lan and phone(android and ios) it can connect and surf web smoothly but not on windows wireless and whenever i reconnect lan cable to pc, it take some time before i can connect and surf internet.

Thanks you.

Try to switch channel to 1, 6, or 11

Width set to 20 mhz

Thanks for your help, tried it but didn't work, anyway i managed to get wifi working on windows, i manually set mtu to 1492 in default bridge table and it work, but another issue arises, both my windows 8 lan and wifi disconnect and reconnect periodically, during that time i can't access router gui and internet, it last for a few second or minute even though both my lan and wifi got stable internet speed and latency.
(LAN)

(WIFI)

Both my download speed didn't match upload speed even when using unifi original router (TRG-212M), maybe because i live on the 13th floor condominium. Tried configure my friend router (terrace house resident) and got both 20 mbps in speedtest.

This post has been edited by Nightingales: Mar 19 2015, 06:55 AM

Well, i managed to solved all my issue setting up dd-wrt, the main cause is the HuaweiHG655m VDSL modem. All this time i only configure my router and leave modem setting the same as when it first configured by Unifi technician. So i separate wan internet port from other service such as voip and iptv, then i remove vlan tagging for internet wan port (eth0.500), disable dhcp and change modem ip address to 192.168.2.1 to make sure it didnt same with 192.168.1.1.

Final result :

[attachmentid=4399231]

Well, i managed to solved all my issue setting up dd-wrt, the main cause is the HuaweiHG655m VDSL modem. All this time i only configure my router and leave modem setting the same as when it first configured by Unifi technician. So i separate wan internet port from other service such as voip and iptv, then i remove vlan tagging for internet wan port (eth0.500), disable dhcp and change modem ip address to 192.168.2.1 to make sure it didnt same with 192.168.1.1.

Final result :

[attachmentid=4399231]

Anyone had tried install DD-WRT firmware into their Unifi's D-Link DIR-615?

Hi guys,

Need help setting up router for DD-WRT

Currently running on the following

Unifi
Modem - Huawei HG8240w Echolife
Wireless Router - RT-N66U
Current firmware 378.54_2 Asuswrt-Merlin

Looking to upgrade firmware to DD-WRT,

Have tried flashing it but can't seem to get the settings right.

Can anyone help?

bro please suggest a device that can do QoS like you did with pfsense and able to share 3G.

thanks.

Hi guys anyone knows how to configure bandwidth cap for each computer ip using DDWRT? Fyi i am using D-LINK DIR615 flashed with DDWRT v24 PreSP2[Beta]Build: 21061. I tried to configure QoS and it is working but it limits all the speed on all computer connected. Is there any way i can configure it to limit only certain ip/mac address? Thanks in advance.