I also couldnt get vlan tagging for internet to work on my ac68u lol. But merlin is good enough anyway.

oh.. well, after few day testing. I manage to deploy dd-wrt to my router. Thanks for guide links here and here

IMO, there are some case u need take note before update firmware to dd-wrt.

At first, if u can't find your original firmware for d'link, try it at Taiwan d'link official website (I have clarified with Unifi customer service).

second, in case of emergency mode, if u see "failed to upload image... bla bla bla" or "internet explore can't found the page.. bla bla bla", It's might due to your dd-wrt download version not supported or try other browser (in my case, my IE 9 failed but chrome success).

After all, follow the procedure to setup dd-wrt

edit- never mind

This post has been edited by scyap: Mar 16 2014, 05:44 PM

It seems like you manage to get OpenWRT work with DIR-615 G2.
I couldn't and I had tried with IE and Firefox, yet with Chrome.

So far, I had tried to upload the OpenWRT Firmware as KLSeet's Guide in the following link.
http://klseet.com/index.php/dir-615-g1/dir...1-flash-process

Any idea?
I had tried many nights, yet no luck.

It depends on the chip. Atheros (like what TP-Link TL-WR941ND uses) does support 3 digits and you can enter these numbers directly into the DD-WRT web interface.

I'm assuming a differences in firmware/hardware revision requires a change in procedure to get it working. I don't have any TP-Link units so I cannot confirm.

I can confirm that it is possible to get it working for both 500 and 600 on DD-WRT but you'll need to use custom/modified switch drivers. More details here if anyone is interested: http://www.dd-wrt.com/phpBB2/viewtopic.php?t=86919

i have this D-Link DIR 615 H/W ver G2 and F/W ver 7.13TM

which dd wrt firmware should i get for this model/ver?

Anyone has successfully configure their TP-link WDR-4300 with DD-WRT? Mind to share?

Ive tried accordingly to KLsheet /Rizvan guideline but to no avail, the WAN wont connect. Tried Open-WRT and found no GUI and spent hours on offline LUCI instsllation due to no internet , solved with WinSCP and putty.

Downloaded 3rd party Ofmodemandmen open wrt, it works great with both IPTV and Internet, but the WIFI signal worst than original TP firmware no matter how i adjusted the wifi settings.

Generally after brief test on these firmwares wifi strength, DDWRT wifi signal is great, openwrt worst, original good.

So if possible i would like some help from you guys who successfully configured your WDR4300 with DDWRT. thank you

^ This. I too would like to know if someone has success setting this up on the WDR4300. I have the v1.7, and I tried it out the other day, to no success.

Not sure if DD-WRT can be used on Maxis FTTH router - Thomson TG784n v3??

No one? V1.7 version.

Appreciated anyone could help. thank you

i'm looking for modem which support dd-wrt main purpose would be setting vpn server on the modem/router which u guys would recommand?

Not sure if anyone got written a guide on configuring Unifi and HyppTV on DD-WRT but I put a guide on my site after having terribad experience by TMNutz.

http://taukeke.com/2014/10/hypptv-on-dd-wrt/

The guide is using DD-WRT on TP-LINK WR841ND and while I'm still new to computer networking (not pro wor), it is currently working and if ever HyppTV goes down, it is TM side not you if the internet still working. Call them to reset the port or whatever shit since it solves the problem.

Bloody fed up with TM who sent contractor change the router to the lousy TRG212M when I'm not around because my housemate can't watch HyppTV... while insists on charging RM120 for that stupid kotak. Still trying to return back the piece of shit to them and ask them to waive the fees. :/

For those who don't know:
Kong has stop all his development in DD-WRT due to professional reasons.

Source:
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=269247

Aww that really sucks. I wonder if it affects Broadcom-based chipset.

I know current TP-LINK router uses Atheros chipset so hope it will remain active in development.

I don't know much about DD-WRT, but from reading that thread about kong's retirement, it seems his development is more for Netgear products.

But then again, I could be wrong as I really don't know much about DD-WRT.
Don't blame me or call me noob if I'm wrong.
I only saw that thread because RMerlin (AsusWRT-Merlin firmware developer) tweeted about it.

Hi all ,
can you guys show me how to revert back to stock ?


TP-LINK 1043nd V2 currently using ddwrt

damn hard to revert
really need pro help !

if attch pic also that will be good

Follow this link, scroll down until you see "Reverting back to original OEM firmware".

For your convenience, the "boot part removed firmware" can also be downloaded from ROOter site (scroll down to "Factory Firmware").

This post has been edited by iOnicStorm: Oct 21 2014, 09:39 PM

wow dude im done successfully revert ...


Really thanks to pros

can this dd-wrt work well with
1043nd v2 + unifi + dd-wrt?

hello,

can someone help me in setting up dd-wrt for TL-WR1043ND V2?,
im using dd-wrt (beta 03-05-2015-r26446), i managed to get it work but can't connect to internet using laptop wireless, it get quite long to connect but managed to get ip address, still.., no internet. Using lan and phone(android and ios) it can connect and surf web smoothly but not on windows wireless and whenever i reconnect lan cable to pc, it take some time before i can connect and surf internet.

Thanks you.