hello,

can someone help me in setting up dd-wrt for TL-WR1043ND V2?,
im using dd-wrt (beta 03-05-2015-r26446), i managed to get it work but can't connect to internet using laptop wireless, it get quite long to connect but managed to get ip address, still.., no internet. Using lan and phone(android and ios) it can connect and surf web smoothly but not on windows wireless and whenever i reconnect lan cable to pc, it take some time before i can connect and surf internet.

Thanks you.

Thanks for your help, tried it but didn't work, anyway i managed to get wifi working on windows, i manually set mtu to 1492 in default bridge table and it work, but another issue arises, both my windows 8 lan and wifi disconnect and reconnect periodically, during that time i can't access router gui and internet, it last for a few second or minute even though both my lan and wifi got stable internet speed and latency.
(LAN)

(WIFI)

Both my download speed didn't match upload speed even when using unifi original router (TRG-212M), maybe because i live on the 13th floor condominium. Tried configure my friend router (terrace house resident) and got both 20 mbps in speedtest.

This post has been edited by Nightingales: Mar 19 2015, 06:55 AM

Well, i managed to solved all my issue setting up dd-wrt, the main cause is the HuaweiHG655m VDSL modem. All this time i only configure my router and leave modem setting the same as when it first configured by Unifi technician. So i separate wan internet port from other service such as voip and iptv, then i remove vlan tagging for internet wan port (eth0.500), disable dhcp and change modem ip address to 192.168.2.1 to make sure it didnt same with 192.168.1.1.

Final result :

[attachmentid=4399231]

Well, i managed to solved all my issue setting up dd-wrt, the main cause is the HuaweiHG655m VDSL modem. All this time i only configure my router and leave modem setting the same as when it first configured by Unifi technician. So i separate wan internet port from other service such as voip and iptv, then i remove vlan tagging for internet wan port (eth0.500), disable dhcp and change modem ip address to 192.168.2.1 to make sure it didnt same with 192.168.1.1.

Final result :

[attachmentid=4399231]