Link: http://www.dd-wrt.com/phpBB2/viewtopic.php?t=75275

---

Added on July 31, 2010, 10:51 pmYou'll want a router that fully supports DD-WRT, a broadcom hardware based router. This will enable you to use the features VLAN ports and tagging in order to replace TM's DIR-615 router. Internet uses VLAN 500 and IPTV uses VLAN 600.

This post has been edited by Alpha Wolf: Aug 1 2010, 12:00 PM

Must it be a Broadcom base router?
Are you current using one which replace the TM's DIR-615 with IPTV working?
Appreciate if you could show the detail configuration, thanks in advance!
My current Buffalo is Antheros & RaLink, if it's true, then I may have to consider getting ASUS RT-N12 or RT-N16 ....

---

Added on August 14, 2010, 11:06 pm
http://forum.lowyat.net/index.php?act=ST&f...0#entry35605712

I've been trying to setup Broadcom base dd-wrt routers to connect UniFi, unfortunately the "WAN port assignment" which suppose to tag with VLAN?.500 is gone once re-boot, PPPoE unable to connect at al.....
Managed to get Ralink & Atheros connect at VLAN?.500, but still don't know how to configure IPTV at VLAN?.600
Any dd-wrt sifu here can help?

This post has been edited by klseet: Aug 14 2010, 11:07 PM

can i put this into my router using windows?

guys
for this website

http://www.dd-wrt.com/wiki/index.php/Acces...m_Configuration
my router is ip 192.168.1.100
so the modem i need to set it to 192.168.1.1 or 192.168.2.1 or 10.0.0.1 ?

You can set your modem IP to any IP except 192.168.1.100 coz it will cause IP conflict between your router and modem.
Best to set your modem IP to 192.168.2.1 or 10.0.0.1..

hi,

i run Firmware: DD-WRT v24-sp2 (08/07/10) std, i got problem to access my modem via router even i try same way as :-
a) http://www.dd-wrt.com/wiki/index.php/Talk:...m_Configuration
b) http://www.dd-wrt.com/wiki/index.php/Acces...m_Configuration
c) from previous post

I set my :-
a) modem ip 192.168.2.1
b) Router ip 192.168.1.1

but it wont work, even i run script i only can acces router from both ip (192.168.1.1 & 192.168.2.1) please help to solve my problem.

Note : im googeling before post so hope no one said 'google 1st coz it wont help '

Hi guys just curious, does Aztech WL830RT4 work with dd-wrt? it doesnt show on the dd-wrt list, so I ask here if anyone ever tried it b4.

Bro, seem like you are also interested in dd-wrt liao ah ...
I don't think dd-wrt support Aztech, cannot even find a single model from:
http://www.dd-wrt.com/site/support/router-database

May I know your purpose?

Btw, this forum is rather quiet .....

I got this router for free from a friend. It is because that router is soo junk with its original firmware. Other than basic use, you cannot rely on this for additional features, but hell, it is not in the list.

That's why your friend give you free lo

If you want to play with dd-wrt, just go get a TP-Link-941ND and flash it:
http://forum.lowyat.net/index.php?showtopi...post&p=36660529



For other dd-wrt users, latest 26Sep10 BS built is out already:
ftp://dd-wrt.com/others/eko/BrainSlayer-V...9-26-10-r15279/

I am actually considering D-link DIR-825. Still think about to buy or not since I didnt use wireless much. It seems that this Aztech is just sufficient for me.

This post has been edited by billytong: Sep 29 2010, 01:13 PM

Beware of TP-Link-941ND ver 3.2. It will have 2 types of flash according to my fren.
Intel flash are not able to save any configuration in DD-WRT.

-pWs-

Actually are you looking for something can vlan tagging with router capability for your UniFi?
How about RB750 or RB750G then?

Fyi, I'm in the process of setting it up, I found out it has a GUI base called WinBox which is quite user friendly to setup.
The IPTV can work now, I'm still working with "oreomambo" to get the internet working, stay-tune bro!

Yes, I also mentioned that before:
http://forum.lowyat.net/index.php?showtopi...post&p=36218556
http://forum.lowyat.net/index.php?showtopi...post&p=36660529
So I assumed those v3.2 sold here does not have that Intel on board

no I am not looking for a vlan router. I am looking for a decent router to share my printer/usb devices + bigger wifi range+ QoS. In this case the 825 fit in what my need. Asus has crappy firmware, it is just a router that only be good if u flash it to dd-wrt. I am not ready void warranty or to wait 1 year to flash it.

but there is indeed a little bit of regret for buying RB250GS. I know the winbox thing. but still, those router do not offer the usb sharing + wifi. Since I already have RB250GS, a decent home router should be sufficient.

fyi, oreomambo did mention about how to setup the vlan 500 in the unifi thread, perhaps you should check out.

guys..

pls tell me

regarding this add-on

http://www.dd-wrt.com/phpBB2/viewtopic.php?t=75275

can i enter it within the router admin config page?

Soon i will get Biz UniFi packages and will max it out with dd-wrt

Currently RT-N16 is the best choice

Gigabit LAN and WiFi N router

http://bit.ly/aoIYm9

This post has been edited by MX510: Oct 2 2010, 12:28 PM

Running on ASUS RT-N12 and RT-N16 on DDWRT.... pretty cool router to play with

If u go for Professional product like Senao and Mikrotik u will find it much more better :-)

---

Added on November 1, 2010, 10:47 amCheck out the latest build of V24 SP2

Use our router database

http://dd-wrt.com/site/support/router-database

This post has been edited by MX510: Nov 1 2010, 10:47 AM

Any suggestion for a cheap & stable router that works well with DD-WRT as wireless client bridge/repeater?

I have tried both Dlink DIR-600 and Buffalo WHR-HP-G300N found out that Ralink & Atheros chipset are not working.

Now looking for Broadcom based router.

Yeah atheros and ralink unstable for repeater best is broadcom pls use Linksys WRT54GL