Hi to dd-wrt sifus,

I'm junior dd-wrt user only not technie, currently flashed dd-wrt on Buffalo WHR-HP-G300N & WHR-G300N for Streamyx.

I'll be changing to UniFi next week, just want to know has anyone managed to replace the TM's DIR-615 router with other router with dd-wrt and the IPTV still working ?

I really want to replace that TM's DIR-615, hope some sifu here can share some experience and how to setup & configure dd-wrt for UniFi.

Thanks in advance !

Must it be a Broadcom base router?
Are you current using one which replace the TM's DIR-615 with IPTV working?
Appreciate if you could show the detail configuration, thanks in advance!
My current Buffalo is Antheros & RaLink, if it's true, then I may have to consider getting ASUS RT-N12 or RT-N16 ....

---

Added on August 14, 2010, 11:06 pm
http://forum.lowyat.net/index.php?act=ST&f...0#entry35605712

I've been trying to setup Broadcom base dd-wrt routers to connect UniFi, unfortunately the "WAN port assignment" which suppose to tag with VLAN?.500 is gone once re-boot, PPPoE unable to connect at al.....
Managed to get Ralink & Atheros connect at VLAN?.500, but still don't know how to configure IPTV at VLAN?.600
Any dd-wrt sifu here can help?

This post has been edited by klseet: Aug 14 2010, 11:07 PM

Bro, seem like you are also interested in dd-wrt liao ah ...
I don't think dd-wrt support Aztech, cannot even find a single model from:
http://www.dd-wrt.com/site/support/router-database

May I know your purpose?

Btw, this forum is rather quiet .....

That's why your friend give you free lo

If you want to play with dd-wrt, just go get a TP-Link-941ND and flash it:
http://forum.lowyat.net/index.php?showtopi...post&p=36660529



For other dd-wrt users, latest 26Sep10 BS built is out already:
ftp://dd-wrt.com/others/eko/BrainSlayer-V...9-26-10-r15279/

Actually are you looking for something can vlan tagging with router capability for your UniFi?
How about RB750 or RB750G then?

Fyi, I'm in the process of setting it up, I found out it has a GUI base called WinBox which is quite user friendly to setup.
The IPTV can work now, I'm still working with "oreomambo" to get the internet working, stay-tune bro!

Yes, I also mentioned that before:
http://forum.lowyat.net/index.php?showtopi...post&p=36218556
http://forum.lowyat.net/index.php?showtopi...post&p=36660529
So I assumed those v3.2 sold here does not have that Intel on board

Hi MX510,

Did you manage to create both vlan?500 (internet) & 600 (IPTV) for your UniFi on RT-16?
Currently I'm using MikroTik RB750, been on 3 weeks without any problem, but I just hope Broadcom base dd-wrt can perform the same since I have some old units around.
Appreciate some sharing here!


Yes, I do notice Broadcom base is more stable for repeater on stock firmware.
I've tested the following Asus :
RT10
RT12
RT10+ (got it recently from LowYat at RM85)

It works well on stock firmware as repeater for my base unit which runs on dd-wrt Atheros (TP-Link 941DN) or Ralink (Buffalo WHR-G300N).
But somehow it doesn't really works well on repeater if flash with dd-wrt.

So far I have no problem creating vlan.500 tagging & assign to WAN port for Atheros & Ralink routers. For Broadcom base, I've tested on Asus RT-12 & Buffalo WHR-HP-G54, can create the vlan.500 tagging but unable to assign it to WAN port.

Did you use RT-16 for your Biz5 or you use the TM stock standard DIR-615?
If you use RT-16, can you create vlan.500 & assign to WAN port for the internet?