Few things i've already done
1) flash my Linksys WRT54G v5
2) connect to my modem to connect to the internet
3) can connect to my router via router IP
But after awhile when i wanted to connect to the router it take alot of times sometime even cant connect to the router.. i need to restart to connect to the router again..
any idea wat happen?

Use different firmware build

I'm Using WRT54G v5
which one is recommended?

This post has been edited by milky: Jul 21 2010, 04:38 PM

Sounds like the NAT table died at least that's how someone described to me what it meant.

Some routers when they have too many connections fail to close those connections when it is finished and just open up near ones. Once the limit is reached u will noticed new webistes not loading but old ones will, bt slowing down, router web interface not loading, etc...

@MX510 & rangerred
any recommended RouterModem able to flash DD-wrt or tomato
becoz now my setup is
innacomm w3100 > WAN PORT WRT54G > via using wrt54g to connect to the internet....

Go for stable version

U should consider urself to Linksys WRT54GL with 16MB RAM or Asus RT-N16 with 128MB RAM

That current router is just 8MB RAM and 2MB Flash

Chipset BCM5352

* DD-WRT Wiki: Linksys WRT54G v5.0 & 5.1 & 6.0


RAM 8 MB
FLASH 2 MB

the WRT54GL & The Asus RT-N16 both also routermodem?
if yes den 2moro i will go shopping..

Nope it just router really not recommended for u to use all in one

DSL modem are easily can get hit by lightning so if they are separated it is much more secure n safe

ASUS RT-N12 ( dd-wrt ) RM199
LINKSYS WRT54GL - RT 4 54M RM190
Both got from Compu-zone price list.


so that's mean i need to use my innacomm w3100 + any of the above router ?
does it very hard to link both together? settings & cables?

Easy to do it if u need help just post it here . Someone here will help u here if i am not around :-)

sorry maybe this is not in this section...
i've a problem.. now i got
modem > wrt54g router
modem ip is 192.168.1.1
router ip is 192.168.1.100
i can open web browser on 192.168.1.100 but not 192.168.1.1 y is that?

try this.. it works for me
http://www.dd-wrt.com/wiki/index.php/Acces...m_Configuration

---

Added on July 23, 2010, 12:55 amcurrent latest but not tested..
try at ur own risk
ftp://ftp.dd-wrt.com/others/eko/BrainSlay...7-16-10-r14815/

This post has been edited by ywkwy: Jul 23 2010, 12:56 AM

Milky - bridged i believe... i have that problem... so i plug directly to the modem (it has 4 ports so its no prob for me) to access its web config.


For Router recommendations I use a TPLink TL-WR1043ND which i flashed to DD-WRT

im using tp link wr340g.. can i flash this wireless router to use dd-wrt?

Only this model TP Link TL-WR1043ND

Bought RT-N12 at rm170

if comparing
Asus Nt-12
&
Linksys WRT160NL which one can handle 20 -30 computers usage?
& NT-16?

---

Added on July 29, 2010, 4:28 pmso u mean that when i change my modem to bridge mode i cant access my modem via router? u mean i need to get a modem which has 4ports so that i can just plug directly to the modem to access it?

btw now my setup is

aztech 600eu > router wrt54g v5 > switches > to my computer

This post has been edited by milky: Jul 29 2010, 04:28 PM

Yup, I've been using SP2 for about a month too. In fact, I'm using the latest available release:
DD-WRT v24-sp2 (07/18/10) std-nokaid - build 14826M NEWD Eko
It's stable and working fine for me.

---

Added on July 30, 2010, 5:47 pmAsus RT-N12 and WRT160NL processing power is more or less similar. RT-N16 on the hand has much better performance but comes with a price.

You can still access your modem's configuration page while using bridge mode: http://www.dd-wrt.com/wiki/index.php/Acces...m_Configuration

---

Added on July 30, 2010, 6:07 pmNeed not use rflow which requires a PC running to collect data. You can run a script with dd-wrt that monitors usage per IP.




This post has been edited by Alpha Wolf: Aug 1 2010, 11:59 AM

Hi to dd-wrt sifus,

I'm junior dd-wrt user only not technie, currently flashed dd-wrt on Buffalo WHR-HP-G300N & WHR-G300N for Streamyx.

I'll be changing to UniFi next week, just want to know has anyone managed to replace the TM's DIR-615 router with other router with dd-wrt and the IPTV still working ?

I really want to replace that TM's DIR-615, hope some sifu here can share some experience and how to setup & configure dd-wrt for UniFi.

Thanks in advance !

[quote=Alpha Wolf,Jul 30 2010, 12:32 PM]
Yup, I've been using SP2 for about a month too. In fact, I'm using the latest available release:
DD-WRT v24-sp2 (07/18/10) std-nokaid - build 14826M NEWD Eko
It's stable and working fine for me.

---

Added on July 30, 2010, 5:47 pm

Asus RT-N12 and WRT160NL processing power is more or less similar. RT-N16 on the hand has much better performance but comes with a price.

You can still access your modem's configuration page while using bridge mode: http://www.dd-wrt.com/wiki/index.php/Acces...m_Configuration

will have a look when the PC FAIR come

---

Added on July 30, 2010, 6:07 pm
Yeah need to use rflow for that features it's a software

[/quote]

Need not use rflow which requires a PC running to collect data. You can run a script with dd-wrt that monitors usage per IP.

[/quote]

what scripts do i need to run? can direct me?

This post has been edited by milky: Jul 31 2010, 05:08 PM