Do you guys think the antec nine hundred is good ?


Features:

* Unique Top mounted 200mm TriCool exhaust fan to cool the hottest system
* Perforated front bezel for maximum air intake
* Two front loaded HDD cages for up to 6 hard disk drives
* The HDD cages act as air ducts to take air in more efficiently. Optional middle 120mm fan bracket to cool the hottest graphic cards or CPU
* Two 120mm TriCool blue LED front fans to cool hard disk drives
* Window side panel comes with an optional 120mm fan mount for maximum VGA cooling
* Top mounted I/O ports for easy access
* Top tray for your MP3 player, digital camera, etc.
* Power supply mounts at the bottom of the case (power supply not included)
* Dimensions: 19.4 " x 8.1 " x 18.4" (L x W x H)
49.3cm x 20.6cm x 46.8cm (L x W x H)
* Advanced cooling system:
- 1 top 200mm TriCool fan with 3-speed switch control
- 1 rear 120mm TriCool fan with 3-speed switch control
- 2 front 120mm special black TriCool blue LED fans with 3-speed switch control to cool HDDs
- 1 side (optional) 120mm fan to cool graphic cards
- 1 middle (optional) 120mm fan to cool CPU or graphic cards
* 9 Drive Bays
- External 3 x 5.25"; Internal 6 x 3.5" for HDD, or
- External 6 x 5.25"; Internal 3x 3.5" for HDD, or
- External 9 x 5.25"
* Motherboard: Fits micro and standard ATX
* 7 Expansion Slots
* Top I/O
- Power & reset button with blue LED
- 2 x USB 2.0
- 1 x IEEE 1394 (FireWire(R), i.Link(R))
- Audio In and Out

• Top mounted 200mm TriCool exhaust fan --> what happen if the fan rosak? where to get brand new after the warranty period ends
• Perforated front bezel --> prepare to clean ur case regularly
• Other than that i think this case is great

one more thing i wanna add to that spec of the case the weight of the case

Weight: 14.1 KG (net) / 16.3 KG (gross) wah ringan nya

what do you think about the Cooler Master Stacker 830 the black one ?

This post has been edited by Exhilaration: Jun 30 2007, 06:56 PM

you can search for the reviews of this casing on the net...there's lot of 'em....it; help's u deciding more on the casing after saw those pics, reviews, pros and cons..

830 is good...i like the design and the sheer space, using myself and i'm not complaining. altho if you want a spacier case, the old stacker (STC-01 i think) would be great...for watercooling and stuff...and more prospects to be modded

Guys, any recommendations for casing with good air flow and ventilation roughly below RM 500? Especially for air cooling system....

This post has been edited by mars: Jul 2 2007, 06:12 PM

Hello guys!~~~~~~~~~~~~
got some question here!!!!
Lian Li PC-V300A casing available at Malaysia ma??? where can i get it???
and compare with SG03..... which one better???
and do them fit my MotherBoard Asus P5N32E-Sli???? since it got own sound card.....and want to add the 8800 display card............
my stacker too heavy so planning to change to small one... hehe.
or u guys got any suggestion which can fit my spec de

This post has been edited by oldfox: Jul 2 2007, 06:54 PM

Okay let's say i have intention to go for a light mini-atx rig. What would the best casing be? Better if it's alu build. Budget around RM500.

Want to do some research before going to mini-atx.

Thanks.

ur mobo is an ATX mobo and it definitely will NOT fit into an m-ATX case without heavy modding.

@oldfox

It is available at ATE right now .. even got it on demo at the shop..

However it doesn't fit non MATX mobo so be concern about it ...

If u are looking for something small yet fit ATX mobo then go Lian Li A-05, great case at the smallest size ..

Thankx Bro...
but now headache about MATX MOBO~~~~
aikss......DOOM , any suggestion aboit <MATX MOBO, budget below RM600

guys...check this out....

World's First Carbon Fibre Case!

by the same fellers that brought us the affordable and popular Microfly series... Ultra!




This post has been edited by mADmAN: Jul 3 2007, 01:10 AM

Sure, either Abit Fatality F190GHD or Asus M2A-VM HDMI

I would go for Abit coz it looks better and can fit C2D .. if u like AMD then Asus or Biostar could be another choice ...

any shop selling cheap 1u chassis?

guys i nd help buying a new casing 2 replace my old cramped casing.my budget is bout rm150.my rig:

e2160
abit fp-in9
2gb ram
6600gt
2x hdd
1x dvd drive

i nd a casing dat has sufficient airflow n space for dat kinda price.looks dont matter.thx a lot

I'm thinking want to build HTPC for recording some program from astro. Just looking any cheap casing look alike HTPC. Anybody can recommend it?

This post has been edited by ikan_semilang: Jul 9 2007, 08:50 AM

Hi there everyone. At the moment, i'm trying to look for a casing that would fit a 3x120 rad internally, at the moment, seems like the only choice is the TJ07, but its a little pricey for me. anyway, heres the question, anyone know the weights of the P180 and the P182? the antec site quotes em at ~ 15kgs? thats like heavier than the larger TJ07, could anyone confirm the weights please? thanks :D

This post has been edited by newmel: Jul 9 2007, 11:21 AM

hmm what about the TT SharK? Its super light and deCently sized, nevermind about the internal 120x3 rad thing, probably impossible