Just post up the question about posting to Penang in the Price & Dealers Guide thread...


Thanks for the advice.. will do so tomorrow...

Is it aluminium casing is worth for its price? lowest is rm238, with sidepanel will reach rm300+. but if CM 532 with 12cm front and rear fan, 8cm blower on top and transparent sidepanel i can get it for only rm220.

i'm in dilemma now...

it depends..for me its worth

have u seen the real Lianli case yet? if not better drop by at ATE and see for urself..

and for me, after own this PC-G7, i dun even care about coolermaster's case, except stacker

if the temp performance is not equal to money spent for it, its just a waste...

i saw Lian Li at ATE. cheapest rm238. sidepanel have to addon another rm100..

btw, steel casing with 12cm fan intake n exhaust and 8cm top blower is not enough for mid-end pc?

what do u think about antec p180 especially its air filter system, is it worth top up RM200 just for the antec p180 or with lower price lian li pc7s?

well the bold part is subjective..some people DO care about lowering the temperature even only 3~4C if use the aluminium case..
and some people buy those aluminium case for look, design, light and modding (aluminium is easier to cut rather than normal steel)

well, CoolerMaster and ICute is nice actually..even chapalang casing also got a nice figure..

i think after all it depends on ur budget..and ur taste too..
but my advice is, get a case that has a good ventilation, especially 12cm front and 12cm rear..side and top can be neglected as long as long as u install the good airflow fan for both front and rear..

no offense ya..just my humble opinion..

This post has been edited by kalakatu: Jun 14 2007, 07:49 PM

Can anyone tell me how big should a casing to fit this spec?

Intel® Core™2 CPU 6400 @ 2.13GHz (2 CPUs), ~2.1GHz
965P-DS3
WinFast PX8800 GTS TDH(NVIDIA)

Currently im having heat prob with my curreny casing
Cooler Master 44X22cm...

Cooler Master 44X22cm

which one is this?? better to give a link to ur case so we know exactly which one...

anyway...a good idea would be to make a blowhole on ur sidepanel for a fan to supply cool air to the GC or suck out hot air from the GC

44X22cm --> i think its dimension..44cm x 22 cm (what a small case, and its only 2D)

ok i found it. Is Centurion 5(CAC-T05).

thanks for your advice. i really appreciated it.

about the fan, what is the suitable cfm for intake/exhaust case fan? i'm going to make a silent pc.

this one isnt it?



so what is the problem? cannot fit the 8800GTS properly?

yup , this is the one =)

no problem
i dont know much about fans, but if u r in tight budget, i think CoolerMaster Silent Fan can do the job..the price is around RM25 for 12cm fan..
or u can try Silverstone's fan, but the price is quite high..
better check on the fan's thread for more info..

like i asked earlier, so whats the prob? cannot fit the 8800GTS properly?

This post has been edited by kalakatu: Jun 14 2007, 08:52 PM

does anyone here own an Antec casing? how good is it compare to other brand?

ok... btw, in your opinion, intake or exhaust need more cfm? coz i got 12cm high-speed delta fan and a voltage regulator to control its speed but not sure to put it as intake or exhaust fan. probably using noctua hsf.

centerion5 kinda small for 8800gts.. at least for me... with 80 intake and 120 rear, even my 6600gt reach >60C... huhuhu unless u want uncle ianho to mod to 120 intake.... for me, u better go for somthing more spacy...

Something more spacy such as??

Erm.. is Lian Li PC-7S spacy enough for 8800GTS or even GTX?? What I mean here is not about whether the casing can be fitted with the GTS / GTX or not but rather.. will it be spacy enough in terms of air flow for the GC.. well.. if you get what I mean that is..

This post has been edited by Phoenixwunin: Jun 14 2007, 09:59 PM

is not cant fit it... is the tempreture prob....
the tech told me the flow is not that good....so i want ask what do you guys think?

Centurion 5's intake is crap.
80mm is not sufficient.
If you wanna use that case with ur 8800gts, i would reccommend a side intake mod at least.
I've just set up a system with that case and the front 80mm fan is just slightly better than those i-cutes which have trouble putting candles out.