yeah will try it asap bro...maybe it's work again..i'm love very well this board...

DFI is a nice board.. hope u can revive it by giving it a "shock"

i'm just tried already..but no chance to bring 'him' back...already change cmos battery with new one but still refused to boot...

maybe i need replacement mobo..

Damn, that was some of my best solution for fixing mobo but it failed to revive yours.

One last thing, did u try using the PSU from u'r first rig, this is a tedious(leceh) process, my bro used to have mobo probs
(LAN light is ON, HDD ON, everything is ON but not BOOTing), he change psu and comes the famiiliar Boot beeping sounds and everything's alive again.

I dont want to give you false hope bro, I'm just saying if u'r up for it.........
The DFI is such a good board to be given up on

nevermind bro..i'm already tired to troubleshoot my DFI...

hehehe..finally i got replacement mobo already..got TPower I45..waiting for shipment...

later i will post the result for my replacement mobo...

wow.. congrats.. so wat u do with yr DFI? RMA?

i dont know yet for my DFI board...call someone to confirm 1st before send to RMA....i dont know exactly when my DFI has been bought by previous owner...

I always been planning to get that board! i'm dreaming to CF my 4870
Some people underestimate that board but the Tpower can performs as good as those high end mobo like
MSI Platinum, ASUS M.F II, DFI LanP LPDK P45, Asus Striker2 Formula, etc...
How much it cost u bro???

Yes, report back on how the TPower overclocks u'r E7200, maybe 4.2Ghz

TPower I45 is good.
Doin 4.0GHz on my E7400.

-pWs-

after get I45 board i will shows the result...i'm bought used I45 rm380 including shipping...new one is too expensive because this for replacement mobo only

---

Added on September 2, 2009, 5:25 amwill do the best to use 'hidden talent' I45 to get the higher score for my E7200


This post has been edited by nidzamputra: Sep 2 2009, 05:25 AM

update me when u got the board.

yes² same to me.. 500fsb no sweat..

hahahaha....i'm just got my TPower I45...tonight i will play with my new toy...

anyone help me..
i oc e7400 on msi p43-neo 3..
i just can go until 3.5ghz with 1.35 vcore..

it bcoz mobo o smthingelse..

maybe mobo.. 350 fsb normally ok..
try raise mobo voltage..

1.35Vcore is set in bios or show in cpu-z??

3.5Ghz use 1.35V is quite high IMO..

wat fsb u using?

how to do that..is it vcore?

fsb mean wat..fsb i set?
333 x 10.5

This post has been edited by hantu667: Sep 3 2009, 06:22 PM

try pumping up some vnb/vmch.

1.35v or something near to it.see if it make any difference.

ok..i try

---

Added on September 3, 2009, 10:19 pmwant to ask..what p35 best oveclock mobo..abit p35E??

This post has been edited by hantu667: Sep 3 2009, 10:19 PM

In the class of P35, the abit doing pretty good in OCing, but it has a rival in competition:
DFI Blood Iron P35-T2RL
Price: RM340@ LYPlaza.
These two board has always been competing with one another..(equivalent to the rivalry of Subaru impreza WRX sti vs. Mitsubishi Evo)
But this was back years ago, its just up to what u prefer...
The abit is better looking, but the DFI may look simple, but it got tricks up its sleeves.
pic:
http://www.tweaktown.com/popImg.php?img=dbll_5.JPG

As for your mobo, the msi p43-neo 3 should have no prob OCing the E7400 more than 3.6ghz.
Most E7400 can run 3.5ghz@ stock vcore/"automatic", 1.35v is in the region of 3.8ghz-ish. (hell some chip can run 4.0ghz on that vcore.)

The real power of CM Extreme 460 is about 435w, hope this is enough for OCing
U can calculate the Watts usage in your entire system here, just in case:
http://extreme.outervision.com/psucalculatorlite.jsp

What the temp of u'r E7400? Do you use after market CPU coolers? One thing i can thinks of right now due to insufficient info:
The cpu might reached a certain Autoshutdown when reached TJMax or BIOS auto shutdowns when cpu temp reached 90c plus(or what the bios specifies)...

333 x 10.5, are using 677mhz rams? Btw, is your 'FSB to Northbridge strap' set to 333 as well? need a little more info bro

This post has been edited by JoBigShow: Sep 4 2009, 12:04 AM