ｃｈｅｃｋ　ｈｉｓ　ｓｉｇｎａｔｕｒｅ．．．ｇｏｔ　ｓｅｌｌ．．．．

ｂｕｙ　ｂｕｙ　ｂｕｙ！！！！

for u guys that wanna try polyester putty .....
if ur getting the industrial polyester putty pls be very careful when handling it .... the dust that been sand off is very hazardous (best to wear a mask) and be sure when u wanna apply the poly putty on to ur kit is for sure, cause if u try to remove the putty after u apply on ur kit ... u can said bye to it ... no joke ... a save way to use it is apply a little bit at a time

here is what it can do to kit if u try to remove ....

btw i've only use industrial poly putty only .... havent try on those expensive 1 yet ...

Noob Here(me)

Any recommendations as to what basic tools, paint, etc. i shuld buy for starters?(the tutorial thread has too many things eh )

1st what u wan to do wiv ur kit?
paint it?
painting it got a lot of ways such as using spray cans, air brushing(AB), hand painting... there are few types of paints as well, lacquer, acrylic, enamel, etc etc....
basic tools get a design knife and a cutter...

hey zero dont scare people la........ u should also show those u have make it nice ma.....

ic...


i guess hand paint lah(since im on a budget XD)
which paint would u suggest for beginners?

hai ay 1st thing to do for all basic to read the instruction how to snap fit 1st then the rest goes on..

later when you snap fit learning along the way.

hand paint not easy though, need A LOT OF PRACTICE to achieve smooth paint...
hand paint can use lacquer(oil base) or acrylic(water base)

hand painting easy nia just use retarded thinner can liao the trick is to know how to mix only

my bad my bad ....

here is what u can do with poly putty ....
for minor usage ...


for large scale usage ...


and HELL YES!! ... u can use it to do this

zero1st

noobish question from me, how long do i have to wait before sanding off mr white putty?

at least 1 day... This is to make sure it dried enuff...

hmm... means poor zaku will have to make do with a huge white zit on his forehead for a few days then...

where i can get cheap n good brush for gunpla?
my tamiya want to kaput edy.. tamiya expensive ler..

lol normal paint brush can ad le ... no nid buy tamiya brush or wat de la ... i also using normal brush now but becareful, nightmare happens when ur brush punya bulu come out ...

that's why.. some also not really good.. the bristle like 'kembang' one
later paint also not nice..
any other cheap² brand?

go hobby shop find bah.. i guess they nt only sell 2 brands tamiya and hobby only right... sure gt other brand...

my flat brush all from Popular, range from RM3 to RM12, depending on the size.

i dont hand paint, so those r pretty ok for me.

the only hand paint i do is small detailing work, like painting rivet and such. for this, i use chinese brush from Shanghai Book Store, popular ones are not too good. those cost around RM3 ~ RM6[SIZE=14]

i tried from unicorn once.. but kaput after several usage..
later the result not nice.. the bristle not really firm like tamiya..
that's why i ask for the brand.. n can easily check it later..

if u wan use it for a long term, go get tamiya one lor... i think it worth the price...