changed de fan n really is de filter creating annoying noise...need to use FM121 at side panel now...sigh..

running one of it at the bottom of the my sniper casing
maybe i am running at the lowest rpm
the sound isnt noticitbae;

lowest rpm? under volt?

i dont like this fans,,coz...

I tested my CM 90cfm against the Scythe 88cfm and I can say the Scythe produces better airflow. I'm not sure how CM rated it in the beginning

Nice...
How about the noise ???

More or less about there, can't really tell the difference unless we use some measuring device? Scythe also does not vibrate so much.

Easy to test oni. Use some manila card n make a tube. Chuck a ping pong ball inside n see how high it will fly with fan on.

You're right and it does sounds like an excellent idea

Okay, here's some reviews:

http://www.overclock.net/air-cooling/74507...er-corsair.html

http://www.youtube.com/watch?v=Lf3p5XfYLsA

1) You feel nothing when you put your hand behind the fan, because the fan has High CFM not STATIC PRESSURE.
2) HIGH STATIC PRESSURE doesn't mean HIGH CFM.
3) HIGH CFM doesn't mean HIGH STATIC PRESSURE.
4) Of course some fans have both HIGH CFM and STATIC PRESSURE.
5) HIGH STATIC PRESSURE fan good for blowing heatsink or other hardware in your casing.
6) HIGH CFM fan good for exhaust/intake (More cool air go into the casing, hot air exhaust from the casing fast)

Correct me if I'm wrong
I'm using Cooler Master 90 CFM Green LED Fan now, quite satisfied with it.

*Edit* The noise(dB-A) that stated in the specification is fake!!!

This post has been edited by Sean94: Aug 30 2010, 06:52 PM

I can feel big air is pushing out by this Cooler Master 90cfm fan, but not sure if its exactly 90cfm as stated in official site.

It's not exactly 90CFM, it's around 80+

ok lah, still not bad, haha!! at least I know that I'm not been cheated.

If you're using as a CPU cooler or radiator fan, the static pressure matters a lot. It's not the cfm really

Artic cooling f12 will easily dapao CM 90cfm fan. Better bearings, higher static pressure... not sure for airflow though...

and another thing f12 beat CM 90cfm, u dun have to worry about leaked oil from bearing and dead LEDs from CM...

Thanks boss and one of my customer compared the fans
http://forum.lowyat.net/index.php?showtopi...&#entry35106282

I got the CM 90 cfm fans and I got to say that the static pressure on this fans is not good at all.

Even a simple paper or pingpong test, I got a couple of different fan models and the CM 90 cfm has the weakest pressure among all

aiks...juz bot 1...tot it was good compare to others...haih

dun feel sad n regret... its still a good fan what...

Hi sorry for out of topic.Hhehe
just to know where can i get this item?

this is actually the replacement for the led switch whether to turn it on or off.
Thanks

This post has been edited by Dubl1n: Nov 20 2010, 03:04 PM