i wanna sell my 790fx if u're interested..

hw about ur ram, wannna sell 2 ma?

no lar...downgrading only..ram still can be use.

whoaaa!! pm ur price bro...i do budget 2008 portfolio wakakkaka
errr using 8 pin psu...hahaha need to buy psu some more

---

Added on May 22, 2008, 12:29 pmhahahha..yup i missed my "o" i meant volt

This post has been edited by fatalynx05: May 22 2008, 12:31 PM

@digswell

did you try the latest bios for TA770 A2+?
How was it? The slow boot problem still exist?
What about the rest of the problems? (eg. multiplier automatically drop after oc, HTT cannot oc to the specific value)
Also, any enhancement for the latest bios? (eg. HTT can oc much higher now, much stable after oc and so on)
Mind to give a brief description? Thanks in advance

Juz flash bios A78XA514.BST 2 days ago..bout boot problem, Still same , take bout 8sec when cool boot and bios save boot take bout 5sec
but a bit fast boot when restart pc

The HTT problem
i try from 250 htt to 255htt.. is no droping or auto drop if see from bios boot but with CPU-Z still hving a lil bit droping

How high HTT can go and how stable ,i still no try yet ..sorry a bit bz this month

This is the ss HTT 255


from 251 to 255 all htt ..... cpu-z read the htt with a lil bit droping

The multipier automatic drop problem i still no test yet

1 thing make me wired ...is like this .... using 5000+BE ..the mutlipier if i adjust to 14x then i enable CnQ with Htt over then 200
So i try 14 x 210 htt ,the bios detect it like tis 14 x 210 htt with Enable CnQ ...from i know if we enable CnQ the multipier should be at default setting

This post has been edited by digswell: May 22 2008, 09:32 PM

ooic , thanks for the info
Looks like those bugs remain unsolved yet.
Have you try to email biostar regarding all these?
I guess I'll do so if you didn't ,
Just figure out that might be able to use software oc on TA770,
most probably will back to TA770 A2+ for some serious benching

y my pc cant overclock more then 3.2 n ram go to 4.4.4.12 ? is it wan to change cooling?

bro, if u can provide a screen shot it would be better..

I email to biostar b4 bout a few problem with ta770 mobo on March . and i got email from biostar after few day they say already know the problem , juz need more time for them to fix it.
The slow boot issue they say is quiet hard to fix it....the issue causing slow boot is the mobo design ..tis wat they say in email

Woww u wan do serious benching with TA770 mobo ?? with dry ice cooling ??

the slow boot probably related to on-board peripherals.... i guess it's the SB-600 chipset, which also said to be limiting maximum oc.

That is very very potong stim for me.

@ 2.640ghz = Sometimes enter safe mode at bios, if not, windows crashes during boot
@ 2.604ghz = Failed torture test ( 1.214v )
@ 2.530ghz = Pass
@ 2.420ghz = Pass

Sob sob

Hi guys. I wanted to know whether If I get myself a 5000+ BE, would I need to increase the ram speed also or just increase the multiplier to overclock the processor? Because I don't have good ram to OC so if need to raise FSB also, better just bought 4800+

Play w the beauty of BE.

-pWs-

Don't get what you meant.

I think what bro pws mean is, the beauty of BE = unlocked multiplier

the unlock multiple

Raising multiplier ONLY (assuming ur HT link is 200 now) will not increase the ram speed

well, rising multiplier will also reduce or increase the ram speed. remember, there's no fsb... the memory speed is a derivative of the cpu clockspeed.

hence....saying that raising multiplier only will not increase ram speed is not correct.

AMD under pressure

Intel really give pressure to us..like this how AMD goin to survive..