u know what dude
orthos and prime failed
sekejap je
tapi weird thing is, super PI i tested two simultaneously 32m, both worked fine after almost 40mins
and i played lost planet at max for 3 hours nothing happened
why eh?

i want phenom fx too
haha
my only hope for AMD is unlocked multipliers
hahaha

Well imo nothing beats actual real-world experience, so if the games and other apps work fine, forget prime and orthos . They aren't really perfect programs.

Wait....another thought, do you run other tasks while orthos or priming? It sometimes causes the program to show errors.

This post has been edited by joe_star: May 17 2008, 07:09 PM

sometimes i get prime stable, but not orthos. sometimes super PI stable but not prime stable and the list goes on. as long as i get one stress software stable i wouldnt mind if others fail as long as no bsod, sudden hang, and etc.

yeah
but if super PI not stable, even at 16k, then i have to start worrying
3.0ghz still cannot stand super PI
but thats with lower volts
i havent given it over voltage
will try later and upload pics

3dmark 06 with 1950gt and 3gb ram is 4745 -

currently am testing the system at 3.0ghz and this will be it for the day (penat repairing my cousin's old system and fitting xigmatek Achilles on it)

but 3.0ghz stable at 1.5v is normal kan?
thats the max voltage it can go, does it mean i cant up the speed lagi?

1.5V is normal.So its stable at 3.0?Dont want to try 3.1?

u can try 1.6~1.7v if u dare.. and push it further . i remember my venice i put 1.696v to achieve 2.8g but wif watercooled

He said edy 1.5V is his max Vcore lol = =.

yeah
if i add the over volt, it can only go to 1.56v - 1.57

ahaha

okay
here's an update at 3.0ghz
super PI is stable
but havent started orthos/prime yet
mau tido
today morning heading to pahang

---

Added on May 18, 2008, 1:54 amwill try 3.1-3.2 tonite
ehehe

i think 3.1/3.2 shud be max cuz at 3.0 and more volts, (i reduced the max volt from +200mv to +100mv and now stable at super pi) heat already 55
haha

This post has been edited by gtoforce: May 18 2008, 01:54 AM

Hahas.1.57V max is ok maybe can hit 3.2

i still dunno why orthos and prime failed and super pi stable at 3.0 ghz

200fsb x 15multiplier
ram at 166mhz
vcore at 1.45
temp - idle 48 load 52

make 1.5V

Which test do you use? Small FFT or Blend? Hmm.....since orthos and prime dont work, why not try using the stress test built into Everest software? OH yea.....and try running hyperpi dual superpi test. I have a feeling both the cores are not stable at full load. A friend had a similar problem with toledo 4800+ lastime.

---

Added on May 18, 2008, 9:37 amBetter have VERY good air cooling for that. TDP of FX-60 is 110W, not like AM2 procs which are mostly 65W

This post has been edited by joe_star: May 18 2008, 09:37 AM

now its sedap
prime is already running without fail
so it should be ok
wat i did was i had to diminish a bit of the FSB - now its 207 x 14.5
the VCORE is still at max
look at the pics
is the vcore ok?
i mean Hyper PI is ok but couldn't take the pics yet
will do it again when i tido
but the temps are really good arent they
its too bad that this is an old CPU

---

Added on May 19, 2008, 1:55 amoh and anywhere near 3.8 or 3.1, its either nothing is stable and/or BSOD
or windows wont boot (pc will POST though)
3.2 ghz, pc wont POST

This post has been edited by gtoforce: May 19 2008, 01:55 AM

3.1 even with Max VCore BSOD/not stable?Oh 3.0Ghz still okay.

Nice temps, but try running prime for at least 1 hour+. If it doesnt fail in less than 5 mins, then it might fail at 30-40 mins, or the next fail point i usually encounter is 2 hours.

Yah bro......but 3.0ghz on X2 is good whether new or old proc

This post has been edited by joe_star: May 19 2008, 09:37 AM

its not X2
but its using the same core although some X2 is manchester
my core is the same with some 3800+
but mostly 4800+ and 4600+

Yours Single Core FX?When AMD Phenom FX out u wanna try again?

mine is dual core FX
the only one in s939
im already satisfied with 3.0ghz now
thinking of lowering it back at stock
haha
i dont like it my cpu kena voltage too high just to add some mhz
oh well

plus the diff tak banyak sangat on games anyway

o.O why return to stock?= = Scare void warranty or heat?