i am using ACS-45.1's elder brother....ACS-295

No lar.. Last time dunno who say clock to clock Intel lose ma..

Yea i agree that intel cannot beat amd in memory performance..

if urs ACS 45.1 is black colour then i shold be elder bro

I am using ACS-285 lah bro....with extra tweeter on satellite speaker one

---

Added on February 22, 2008, 6:41 amMost of the NB will feel hot without active cooling
Even those c/w heatpipe mobo still will feel hot without add-on cooling fan.

This post has been edited by ongbs: Feb 22 2008, 06:41 AM

jackdante22 refresh 1st post everytime he logs in. Please update his result

Who say??

Who is him?
Database is it???

-pWs-

here is the ss ... along with stable (overrated actually) superPI


hurm ... using d 2nd most recent bios and i'm kinda like it
it allows 2t command rate and auto-reset setting for bootable-ity in most of the time

@ all ram guru:

any advice on how to make d ram run @ 1000 @ 5-4-4-x w/ 2.2v on ta690? i'm havin hard time to do that but i managed to run it @ 984 w/ same timin & voltage (could be a 'lil bit higher). tried once but d sys manage to boot @ 1000 (w same timin) w 2.4V which i think is too much for just few mhz of increase. put 2.3v in bios & d system won't boot, givin continuous long beeps...

any input guys? specs as in siggy...



This post has been edited by ah_khoo: Feb 22 2008, 10:22 AM

MAL set to 10
trfc 0 n 1 try set to 127.5
see either it work with same timing n voltage or not

ma'sih manyak2 bro... will try it out 2nite.

mal 10? never once i set it to that value, could it be d culprit that d ram can't boot @ 1000 w 2.3v...

This post has been edited by ah_khoo: Feb 22 2008, 10:33 AM

try first, coz i x penah pakai KVR.. if culprit..10th, ah_khoo will come

Suddenly become speaker thread...
ACS 45.1 Black reporting in...
My white one kong out d...
If not can make ACS 45.1 Black&White 4.2...

tak nak 10 annith, mau gfx instead...

just wanna make it run @ 1000 only w/ 2.2v for 24/7 usage, i'm not aimin for any record coz obviosly my chip aint goin any further than 3.2GHz.

x penah pakai KVR > sombong lah... ko org miskin, kena paka kvr mah, x larat beli premium ram...

one old gud set of speaker can pwn 45.1 (be it black or white) at that time... acs 48...

it was my dream 2.1 speaker back then, but i settled w/ a set of 45.1 white too...

This post has been edited by ah_khoo: Feb 22 2008, 10:56 AM

tRTC, MAL, TRFC try loosen c...
c how high ur ram can go on loose timing d oni tighten them...

---

Added on February 22, 2008, 10:58 amwan 24/7 usage nonid tight timing la...
5-5-5-15-20 lo...haha...

This post has been edited by byfc2010: Feb 22 2008, 10:58 AM

it seems like there's no diff 5-4-4-x & 5-5-5-x in term of stability w/ d latter needs less vcore. heck i even loosen it to 5-6-6-x, same, d system just won't boot @ 1000 w/ 2.3v.

if put 2.2v memtest hang not even completin d 1st round of test 5...

neway, thx for d input bro.

@ah_khoo..just make ur ram run slightly under ddr1000..then make the timing tighter..ddr984 is gud enuf..coz u need to know..a ram have its wall..

yup, that's wat i'm doin atm (but 3.0GHz is soother to d eyes mah... ). d ram manage to do 1000 (or slightly higher) on intel b4, dats y i'm tryin to push it to run @ 1000 max. i know ram tends to run lower on amd, but d fact that from 984 to 1000 need 0.2v of increment is really leavin me no clue. stranger it's when d system can't boot w 2.3v...

This post has been edited by ah_khoo: Feb 22 2008, 11:21 AM

shud i start my ddr1200 fever again?

tolong bro xixo to promote abit...

lots of cash needed..sell my proc and mobo..then make a new one