ma'sih manyak2 bro... will try it out 2nite.

mal 10? never once i set it to that value, could it be d culprit that d ram can't boot @ 1000 w 2.3v...

This post has been edited by ah_khoo: Feb 22 2008, 10:33 AM

tak nak 10 annith, mau gfx instead...

just wanna make it run @ 1000 only w/ 2.2v for 24/7 usage, i'm not aimin for any record coz obviosly my chip aint goin any further than 3.2GHz.

x penah pakai KVR > sombong lah... ko org miskin, kena paka kvr mah, x larat beli premium ram...

one old gud set of speaker can pwn 45.1 (be it black or white) at that time... acs 48...

it was my dream 2.1 speaker back then, but i settled w/ a set of 45.1 white too...

This post has been edited by ah_khoo: Feb 22 2008, 10:56 AM

it seems like there's no diff 5-4-4-x & 5-5-5-x in term of stability w/ d latter needs less vcore. heck i even loosen it to 5-6-6-x, same, d system just won't boot @ 1000 w/ 2.3v.

if put 2.2v memtest hang not even completin d 1st round of test 5...

neway, thx for d input bro.

yup, that's wat i'm doin atm (but 3.0GHz is soother to d eyes mah... ). d ram manage to do 1000 (or slightly higher) on intel b4, dats y i'm tryin to push it to run @ 1000 max. i know ram tends to run lower on amd, but d fact that from 984 to 1000 need 0.2v of increment is really leavin me no clue. stranger it's when d system can't boot w 2.3v...

This post has been edited by ah_khoo: Feb 22 2008, 11:21 AM

tolong bro xixo to promote abit...

this aint a kopitiam thread bro, we only post informatives replies...

d darkside is too temptin w/ d value series in e2xxx, so it's not surprsin if there are users here jump into d performance bandwagon. i was there once but now dah bertaubat...

This post has been edited by ah_khoo: Feb 22 2008, 03:06 PM

dissappointment + hunger for power (nice figures in benchies) are d reasons behind this.

bro, dun any how put my name there leh... i'm just a lurker in this thread who know very limited thing...


@ cracksys

yas is xp90 / xp90-c?

if alu just pair it w/ normal fan (no need high rpm) since alu is not gud in absorbin heat if compared to copper.

if full copper aka xp90-c, put a screamer fan on it as it'll be more effective.


@ xixo

lah, 2 kali 5 je... when one say he/she neber use cheapo stuffs, meanin that d person is rich lah...

This post has been edited by ah_khoo: Feb 22 2008, 04:19 PM

no one force u to buy mah...

when d max are reached, what else to show? downclockin?

yup, process of learnin is not always fun. but to be fair, gud f3 (unlike mine) are hard to get.



ade ke?


get a g2 / be if financially allowed. or wait for tri-core phenom which will come cheaper than quaddies. i'm prayin hard that there'll be tri-core phenoms oc as well as f3 we have here...

This post has been edited by ah_khoo: Feb 22 2008, 04:43 PM

bukan cap ayam / cap itik?

i can see some decent g2 (3.0GHz capable or more) which are not b.e. try to ask around wat batch are they can save u some amount of $$$ if u manage to find those of gud batch. if money is not an issue, by all mean go for 5000+ or even 6400+.

that's kinda high bro... try to find out d max clock for d chip 1st by lowerin d frequency of ya ram.

correction bro, mine can't do any speed w 2.3v @ divider 667. either 2.2v (hang at memtest) or 2.4v (bootable but i dun feel comfortable runnin 'em w that kinda voltage) @ 1000MHz @ 5-4-4-12.

u can't solve d equation by havin 2 unknown, eliminate 1 then u'll know which is causin d instability.


after some suggestion from some sifu:



5mhz more to go...

This post has been edited by ah_khoo: Feb 22 2008, 09:07 PM

anakin dah siap sedia nak join darkside ke?

tbh bro, it's harder for u to sell as bundle unless some1 really despo to get a bundle, am sure 90% of those interested are just aimin for d chip. neway, gud luck to u...

ofcoz orthos... 32m just around 20+ mins while orthos takes atleast 1 hour to complete a around.


This post has been edited by ah_khoo: Feb 23 2008, 10:11 AM

bro, be considerate lah... bro -pWs- is doin this volunteerily, he's not gonna monitor d thread 24/7. he did update regularly, imo he deserves more respect than any sifu here.

easiest way for him to keep track, u guys just pm him d latest result. to update db he need to go through every page. r u willin to do that?

fast fast show result lah...

oc jangan tak oc...

go to htt setting, set d 1st option (4got wat it is), change d value from auto to 16-bit. leave others unchange, save & exit. things shud be fine after that.

it's d htt link width.

@ cracksys
no problem bro.

it's normal for d chip to have vdrop (not fluctuation) of 0.016 during load, it's been like that since d days of s939.

This post has been edited by ah_khoo: Feb 24 2008, 03:35 PM

most of d b.e walled @ 3.2GHz, so in ya case it's pretty normal.

timin of ram?

how's ya new b.e doin bro? mind to share? intel is just to fast to get bored with, rite?