AMDŽ Socket-AM2/AM2+ Overclocking thread (V6), Will AMD alive??
|
|
 Feb 20 2008, 11:50 AM
Return to original view | Post
#21
|
 
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.  
|
QUOTE(digswell @ Feb 20 2008, 11:44 AM) or might wait and testing tis AMD Dual Kuma Core with HT3.0 as long as they promise this new duallies can oc as gud as f3 (or even better). kinda ironic but these days amd are like intel in d past where speed is d only way to catch up d performance gap.    |
|
|
|
|
|
Feb 20 2008, 12:32 PM
Return to original view | Post
#22
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cracksys @ Feb 20 2008, 12:05 PM) nope ... doing this will make biostar setting all those timing into tight one use bios 0605 instead, d latest one is kinda buggy. tried once but revert back in less than 30mins... still bootable but will reset HTT to 200 more extreme outcome .. cannot boot at all need to reset bios sumore  ------------------------------------------ i wanted to go more but maybe its my ram thats holding me back ... or maybe its my bios version ... (updated one, flashed by previous owner)   try to loosen d main timings to 5-5-5-15 together w 2t enabled.  This post has been edited by ah_khoo: Feb 20 2008, 01:21 PM |
|
|
Feb 20 2008, 03:59 PM
Return to original view | Post
#23
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(xixo_12 @ Feb 20 2008, 03:44 PM) yap.. become ram discussion edi aik... jadi puan pulak dah... rm290   amd is greatly affected by ram, so d more powa d merrier (pls correct me if am wrong)...  |
|
|
Feb 20 2008, 04:41 PM
Return to original view | Post
#24
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(dblooi @ Feb 20 2008, 04:30 PM) crucial 10th anniversary that's really awesome... single stick test 1320MHz with 2.6vdimm dual channel test 1200MHz with 2.1v   how bout DC @ 32M bro? |
|
|
Feb 20 2008, 04:54 PM
Return to original view | Post
#25
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(mizivincible @ Feb 20 2008, 04:53 PM) The record that still stands strong for 3800+ F3. Bro db, that vcore was with wc right ? Or dice ? ice water + air cond iirc... proud of lyn d record is, imagine d setup is under d.ice... |
|
|
Feb 20 2008, 05:09 PM
Return to original view | Post
#26
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(mizivincible @ Feb 20 2008, 05:03 PM) ah khoo, why dont you try the same thing ? swap my chip + top RM50 (from me) with u bro? how does it sound? Since u mentioned u wanna be top ten right ? joking joking  I wonder what's with dice, 100% oc can be done.... Added on February 20, 2008, 5:05 pm Bro db, urmm, last time the ss u show me for the 3.6ghz, that one wc or air cooling ? I noticed mine with 1.52v only can go at 3.52ghz. But the temp is kinda low since I setup in aircond room - idle 30. load 32. Can I pump more vcore if that case ? I notice add 1 fsb have to add another vcore. with air coolin, mine can hardly reach 3.3GHz prime stable, d most is 32M passed only, & that need hell of voltage like 1.5~1.6v...  This post has been edited by ah_khoo: Feb 20 2008, 05:10 PM |
|
|
|
|
|
Feb 20 2008, 05:16 PM
Return to original view | Post
#27
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(mizivincible @ Feb 20 2008, 05:13 PM) So if PWM ( I only know -pWs- ) jerit that time still safe or not ? I really itchy to pump more vcore but dont dare after 1.56v. Actually the one we have to care is the temp or the vcore ? What if high vcore but low temp, still safe or not ? if like that ledi kecut then how bout those who r doin dice? their temp can hardly reach 0'C (sub zero) but d juice they pumped are insane... Editted : Beside, I still sux at ram timing |
|
|
Feb 20 2008, 05:28 PM
Return to original view | Post
#28
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(mizivincible @ Feb 20 2008, 05:22 PM) That's why, I wonder safe or not. Later benchies all godlike but daily use cannot tahan then die liao. So that means we have to monitor the temp only right, as long as its still low temp we can pump vcore right ? they are cases that after extreme oc components tend to need more voltage in order to be stable, dat's y we can't see extreme oc were tested on prime, d most were 32M only. Editted : Just saw your offer hahaha. Kenot woo, I travelled far just to take the proc from sempronic haha. Or u were offering Bro db's proc ? » Click to show Spoiler - click again to hide... « nope, no body on earth will let go a diamond chip easily, was just jokin w u only... |
|
|
Feb 20 2008, 05:39 PM
Return to original view | Post
#29
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(mizivincible @ Feb 20 2008, 05:32 PM) U ahh, at first I was like "no wonder I only see 32m but not more than 1 hour orthos on most high oc results" and was like "god after this 3.1ghz also have to use 1.3 1.4v" Then click the spoiler once i think but still on 3.3GHz only. prime failed rite away after i click start.  Seriously, have you touched 1.6v with air cooling before ? even w lower multi, i can't seem to do 330htt & above... my chip got this intel fsb wall i think... |
|
|
Feb 20 2008, 05:46 PM
Return to original view | Post
#30
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(mizivincible @ Feb 20 2008, 05:42 PM) I see, I think I need 1.6v to be stable at 3.6 above. Of course with air cooling only. But that hell of voltage plus that PWM screaming like tikus kena trap and screams, kinda scared already. Will try again later I guess, owh yeah, I havent post any SS yet I guess, will do when I get my hand on my rig later. if u have air cond in ya room, on it when oc, it helps to reduce voltage needed for d chip to be stable. |
|
|
Feb 20 2008, 08:02 PM
Return to original view | Post
#31
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(jackdante22 @ Feb 20 2008, 07:59 PM) i'll try later when going to pasar malam. memtest for basic stability, then sp 32M & finally orthos / occt. btw, how to know how far my RAM can go? using SPI 32m? |
|
|
Feb 21 2008, 09:24 AM
Return to original view | Post
#32
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(xixo_12 @ Feb 21 2008, 09:16 AM) oc is long journey in term looking for sweet point.. so try ur best..play with timing a lot.. if u like to use reserve value just to play super pi maybe u face prob when it become more tight and reach ddr2-1200.. so ur current result is ok.. so keep it up .. d sifu has spoken... ot abit: amd are cuttin prices on their 3800 series...    edited: i think i'm sick... » Click to show Spoiler - click again to hide... « This post has been edited by ah_khoo: Feb 21 2008, 09:26 AM |
|
|
Feb 21 2008, 09:51 AM
Return to original view | Post
#33
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(xixo_12 @ Feb 21 2008, 09:27 AM) who says like in spoiler?? must taaahaan....  by d way, i started to think that it's d ram that hinderin my oc... i did put 'em on 965p cross-fire board once but they can't boot at all...  » Click to show Spoiler - click again to hide... « which one to go 1st... ram or gfx... any input guys...  This post has been edited by ah_khoo: Feb 21 2008, 09:51 AM |
|
|
|
|
|
Feb 21 2008, 10:04 AM
Return to original view | Post
#34
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(xixo_12 @ Feb 21 2008, 09:56 AM) GF no x.. » Click to show Spoiler - click again to hide... « can't bear to see eveli one doin so well w d ram while mine...  |
|
|
Feb 21 2008, 10:10 AM
Return to original view | Post
#35
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(byfc2010 @ Feb 21 2008, 10:05 AM) my super pi 32M... y not push it further bro, i'm sure ya f3 is capable of 3.0GHz w/ that kinda voltage. wanna do 3Ghz soon... bb work d...haha... 3.0GHz (10*300) w/ 667 divider, ram runnin 1000 @ 4/5-4-4-8 is just nice for ya 10 annith imo. QUOTE(xixo_12 @ Feb 21 2008, 10:06 AM) so go for ram la.. let see whether i can sell off mine 1st, but d temptation is strong... poison lil bit.. gud ram can oc more.. we want moarrrr  This post has been edited by ah_khoo: Feb 21 2008, 10:11 AM |
|
|
Feb 21 2008, 11:00 AM
Return to original view | Post
#36
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(dblooi @ Feb 21 2008, 10:34 AM) the force is strong in you i'm still noob in ram clockin bro, trial & error is really tirin for an old man like me... TA690G is good in ram overclocking  until now, i only have d chance to play w one pair of ram, that's d one i'm usin... back in s939 days, i managed to play w few pair, that's y i'm more comfortable w ram overclockin on that platform.  too bad i'm not able to brin out d best of my dcdcl, they were capable of 1000 @ 5-4-4-12 on intel w/ 2.2v but not on d current rig... This post has been edited by ah_khoo: Feb 21 2008, 11:03 AM |
|
|
Feb 21 2008, 11:43 AM
Return to original view | Post
#37
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(AMDAthlon @ Feb 21 2008, 11:32 AM) AMD Athlon 64 X2 4000+ Brisbane BH-G1 | AMD Athlon | Biostar TForce560A2+ | Kingston DDR2 667 Value | 533Mhz | 5-5-5-15-CR1 | Stock check again d contact between hsf & d chip, it's kinda impossible to reach 60++ onlad for that kinda voltage. i assume ur not usin core temp which can't read brisby temp correctly. if possible, re-seat d hsf... Btw how to add voltage eh?I add via BIOS straight kena BSOD Btw using stock voltage too.I guess might upping higher if got good cooler like Artic Freezer 64?Maybe? Temperature Idle very cool oh 33C when stress 60++ when gaming 40-50++ nice clock @ low voltage...  This post has been edited by ah_khoo: Feb 21 2008, 11:45 AM |
|
|
Feb 21 2008, 02:54 PM
Return to original view | Post
#38
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(temptation1314 @ Feb 21 2008, 02:33 PM) Don't want sell my Black Edition edi  My Precious~~ It always belongs to Master The RAM, don't know lar... I got think of waiting DDR3 to power down their price and grab them.. lolx Dreaming... it's hard for ddr3 to drop in price overnight, not until it bcum common... w am2+ still on ddr2, d day is still far i would say. |
|
|
Feb 21 2008, 03:24 PM
Return to original view | Post
#39
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(alive88 @ Feb 21 2008, 03:18 PM) hey guys,im new in oc..ive tried to oc..and this is my 24/7 rig after OC. dah expert nyamar newbie plak... comment please sifoo  ok lah tu, 3.3GHz @ 1.4v is something that i can only dream about... if runnin 24/7, i would prefer stock voltage / near stock voltage tbh. i believe yas still manage a 3.1/3.2GHz under stock, more than enuf for daily usage + gamin... |
|
|
Feb 22 2008, 09:38 AM
Return to original view | Post
#40
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
@ all ram guru:
any advice on how to make d ram run @ 1000 @ 5-4-4-x w/ 2.2v on ta690? i'm havin hard time to do that but i managed to run it @ 984 w/ same timin & voltage (could be a 'lil bit higher). tried once but d sys manage to boot @ 1000 (w same timin) w 2.4V which i think is too much for just few mhz of increase. put 2.3v in bios & d system won't boot, givin continuous long beeps... any input guys? specs as in siggy... 
This post has been edited by ah_khoo: Feb 22 2008, 10:22 AM |
|
Topic ClosedOptions
|
| Change to: |  0.0467sec
 0.36
 7 queries
 GZIP Disabled
Time is now: 6th December 2025 - 11:25 AM |
Quote
