here's mine...

I guess his fan is actually the pump from his CoolIT FreeZone Elite speed.

Using the ST400 to oc this mobo is surely not enuf, need to wait for my new psu. aih.

is anyone using this board wit Window Vista as the OS ?
is it okie ? got any problems ? cause mobo got problem wit Vista.
Duno why.

elite pump is on the PCB... not like frezone which u put in on the mobo...

hmm dunno some crazed mobo fan result or maybe cause i made the bios ignore the cpu fan speed..since there isnt any??

hmm sniper whats vin1 for u ah?? check bios and see whats ure gtl
but ures looks like FSB termination aka CPu VTT aka HT link voltage.

---

Added on February 11, 2008, 1:00 pmis it the utility problem ??
or general ..??

technically p35 is just plug and play once u install vista.. u can change to any p35/x38 mobos.. not too sure about G33.

curious.

This post has been edited by cstkl1: Feb 11 2008, 01:09 PM

here are mine with gtl setting in bios all 3 setting set to 0.67X

*sorry some problem with uploading the picture. wonder why?

This post has been edited by overclockalbert: Feb 11 2008, 01:34 PM

what seems to be the problem? mine working a-ok...can u be specific?
even oc'ed my quad to 3.4G also got no problem...still pushing for higher speed thou

yeah...about this 0.67x, 0.63x blabla...what does it mean actually...saw the UT bios for this gtl...dunno how to translate this 0.67x thingy to the 110 or 111 setting like the UT


btw, i've replaced the stock NB cooler with the HR-05 SLI/IFX...by slightly bend the heatsink, it perfectly snug in between the gfx and the cpu fan. even placed a 80mm fan on it...the temp dropped about 7-10c...idle right now around 43-44c...ok la considering my ambient temp

This post has been edited by remysix: Feb 11 2008, 02:55 PM

@cstkl1
same as remysix and overclockalbert, 0.67X, don't know what does it mean though

maybe you can post the screenie of it for cstkl1 to refer since the bios for DK is a bit diff. from UT/LT

uik i dont have the UT board bro.. was playing with friends one in singapore during CNY...
awesome..
thats y i think the x48 will be same with the UT since the X38 is same as DK.



read edgeofstability.com

it has excel spreedsheet and he even explained it right to the core..
hope that helps..

This post has been edited by cstkl1: Feb 11 2008, 04:48 PM

i will, but not now... got no camera le... later aight...

well...
@cstkl1
that's a good site i tell you...

of course larr it was meant for DFI UT but can be applied to DK also..

takes time to understand play with it..
took me a while but i get the idea.

this is y.. sad wei u guys using dual core on this mobo..
should rape it with quaddies
if teh x48 got strap 400.. confirm already maximus lose ..


This post has been edited by cstkl1: Feb 11 2008, 04:53 PM

x48 for dfi have ddr2? i think they will also focus on ddr3

supposedly they will

oh yeah guys the gtl setting for 65nm proc no dif but for 65nm quaddies yes
and looking from the problems with 45nm proc.. it will make a difference..

damn.. hardly understand until i saw below post..

** should inform earlier shall the reference for DFI user..

what to do... all money gone to get this board and good PSU

ko gelojoh bonar...

psst, pinjam your Quaddies

wei its the same

haiyo
see the excel sheet

and the graph
so with those 0.67x etc u increase the voltages of the GTL's

whats the difference
only this board and if i am not mistaken one of the ati dfi boards
u can change core 0/2 and core 1/3 idependently

no other boards can and they all assume that both are having the same reading when its not.. so difficult..
have u wondered y sometimes when u run orthos ( try the older one.. which u can choose which core to run and run two of them)
this core fail and the other core didnt??

should i go for vista or xp ?? i heard xp might be more oc'ble than vista . is it true ?

they are the same
just that software base different
and with vista easier to find stable
since vista on some application stressed both cores to 75-80 percent..
those ppl who were unhappy cause they just found out their system is not stable..
most of the time it was their NB/PLL and rams was the culprit..

show of hands how many ppl here run memtest86 for 1 to 2 days??

---

Added on February 11, 2008, 6:13 pmhmm and how many of u this that the DA before will show up again??

hmm i got an example for u guys.. on y that gtl thingy so important..

u'd be suprise.

and y i am envious of u guys who has this board.. with the ability to control both gtl's..



This post has been edited by cstkl1: Feb 11 2008, 06:14 PM

ran memtest for 24 hrs during my BH-6 days...for burn-in...other than that onli 8 hours...

and i'm currently envy you coz u know why that gtl is so important
i know it is important especially for quaddie but i just dont know how to benefit from it...if using the UT or the RDxx based mobo, u can change the GTL Ref Voltage from say 100 to 110 and other setting, this DK only has 4 setting...0.67x (67%), 0.61x (61%) and another 2 (I think)...i'm totally lost bro...anyway, i'm gonna do the old skool style lah...trial and error...and it will be a lot of errors

wei bro i am in the same boat...
if u think that the dk is worse
try imagine most boards out there which has one option only CPU reference GTL..
instead of core 0/2 and core 1/3...
that already makes me envious..

only thing hmm need a quadies to test the full theory..
heck dk can change trd base on both channel of the rams.. ( y is this good) stability for 4 sticks)

anyway me looking at MSI boards.. too.. kekek want to see all the boards ppl neglect.. any hidden jewels..


This post has been edited by cstkl1: Feb 11 2008, 09:54 PM