Welcome Guest ( Log In | Register )

Bump Topic Add Reply RSS Feed
48 Pages « < 6 7 8 9 10 > » Bottom

Outline · [ Standard ] · Linear+

 DFI LANPARTY DK P35-T2RS, Discussions and Results

views
     
gsan
post Feb 6 2008, 08:14 PM

Electrical RF Engineer
*******
Senior Member
2,471 posts

Joined: Jan 2003
QUOTE(sniper69 @ Feb 6 2008, 07:44 PM)
@gsan
that's without graphic card and the position is facing the graphic card PCB, how about facing other direction?

doh.gif, running on stock Team Extreme DDR2 800MHz, all went well until i started overclock the RAM, hitting DDR2 1000MHz is easy with loose timing, rebooting... doh.gif, the system cannot boot anymore, thinking maybe too much, lowering down the CPU frequency by using CPU multiplier, still the same... increasing vDIMM too... nothing change, swap slot 1st trial on orange slot, 2nd on yellow slot, still... nothing change, it just won't boot... i was like... doh.gif shocking.gif, thinking maybe i killed the RAM, try on single module A... will boot, DIMM1, DIMM2, DIMM3 and DIMM4, but on module B, it won't boot no matter which slot i plugged... guess i killed the RAM, tried on my other system... MSI P35 Neo2-FR, doh.gif, voila... went well over DDR2 1125MHz @5-5-5-15 (without any tweak initially)... i was like... oh my, what's going on here... currently on 2x1GB Kingston ValueRAM + 1x1GB Aeneon ValueRAM both @DDR2 781MHz @5-5-5-15
*
this is the only position that I could install this cooler on the DK, else be blocked... regarding your problem, do you clear cmos and try again?
sniper69
post Feb 6 2008, 08:25 PM

.: One Shot One Kill :. .+|Level 9 Type Shit|+.
*******
Senior Member
7,173 posts

Joined: Jan 2003
From: PCH
QUOTE(gsan @ Feb 6 2008, 08:14 PM)
this is the only position that I could install this cooler on the DK, else be blocked... regarding your problem, do you clear cmos and try again?
*
yes, i did... it just won't boot... sad.gif
cstkl1
post Feb 6 2008, 08:40 PM

Look at all my stars!!
Group Icon
Elite
6,799 posts

Joined: Jan 2003
nice vid...
awesome..
16 mins??
but awesome vid..

but for the DFI owners..

good site for u guys

edgeofstability.com

time to go on the edge...!!.

Added on February 6, 2008, 8:56 pm
QUOTE(sniper69 @ Feb 6 2008, 07:44 PM)
@gsan
that's without graphic card and the position is facing the graphic card PCB, how about facing other direction?

doh.gif, running on stock Team Extreme DDR2 800MHz, all went well until i started overclock the RAM, hitting DDR2 1000MHz is easy with loose timing, rebooting... doh.gif, the system cannot boot anymore, thinking maybe too much, lowering down the CPU frequency by using CPU multiplier, still the same... increasing vDIMM too... nothing change, swap slot 1st trial on orange slot, 2nd on yellow slot, still... nothing change, it just won't boot... i was like... doh.gif shocking.gif, thinking maybe i killed the RAM, try on single module A... will boot, DIMM1, DIMM2, DIMM3 and DIMM4, but on module B, it won't boot no matter which slot i plugged... guess i killed the RAM, tried on my other system... MSI P35 Neo2-FR, doh.gif, voila... went well over DDR2 1125MHz @5-5-5-15 (without any tweak initially)... i was like... oh my, what's going on here... currently on 2x1GB Kingston ValueRAM + 1x1GB Aeneon ValueRAM both @DDR2 781MHz @5-5-5-15
*
increase ure referesh cycle time.. say 52??
u get better compaitability for more than 2 sticks of ram..
also might want to increase that mch ..


This post has been edited by cstkl1: Feb 6 2008, 08:56 PM
baok
post Feb 7 2008, 05:41 AM

Enthusiast
*****
Senior Member
737 posts

Joined: Oct 2005
erm... I saw people reach 600fsb++ on air at XS and I feel so jealous.. One person use GB G33 DS2R!! another one reach 620fsb with P5B!! damn.. lets reach 600fsb with this board thumbup.gif

http://www.xtremesystems.org/forums/showthread.php?t=174820

http://www.xtremesystems.org/forums/showthread.php?t=175562

http://www.xtremesystems.org/forums/showthread.php?t=175033

damn jeles shocking.gif shocking.gif

This post has been edited by baok: Feb 7 2008, 05:51 AM
cstkl1
post Feb 7 2008, 12:43 PM

Look at all my stars!!
Group Icon
Elite
6,799 posts

Joined: Jan 2003
QUOTE(baok @ Feb 7 2008, 05:41 AM)
erm... I saw people reach 600fsb++ on air at XS and I feel so jealous.. One person use GB G33 DS2R!!  another one reach 620fsb with P5B!! damn.. lets reach 600fsb with this board thumbup.gif

http://www.xtremesystems.org/forums/showthread.php?t=174820

http://www.xtremesystems.org/forums/showthread.php?t=175562

http://www.xtremesystems.org/forums/showthread.php?t=175033

damn jeles  shocking.gif  shocking.gif
*
until the secret of fsb termination vs bus vs NB vs vcore is understood..

those guys found out y my bet

till then old school overclocking.. trial and error..that means either am kong 10 minutes to a week ..

u can do it... brows.gif
a1098113
post Feb 7 2008, 01:26 PM

~Retired~
*******
Senior Member
3,119 posts

Joined: May 2007
From: Home
i believe most of the time its trial and error. I am old skool la.. brows.gif by the way, my cpu wall is at 440Mhz, i dont think i can go any higher, but now, i have learnt how to use the memset to the maximum. Which is actually a super tool.
OC4/3
post Feb 7 2008, 11:20 PM

.
Group Icon
Elite
4,746 posts

Joined: Dec 2007
From: Speed rule
QUOTE(a1098113 @ Feb 7 2008, 01:26 PM)
i believe most of the time its trial and error. I am old skool la.. brows.gif by the way, my cpu wall is at 440Mhz, i dont think i can go any higher, but now, i have learnt how to use the memset to the maximum. Which is actually a super tool.
*
For some reason,memset is not doing much for my system.But if can use memset,can shave a few tenth off. brows.gif
cstkl1
post Feb 8 2008, 12:16 AM

Look at all my stars!!
Group Icon
Elite
6,799 posts

Joined: Jan 2003
QUOTE(OC4/3 @ Feb 7 2008, 11:20 PM)
For some reason,memset is not doing much for my system.But if can use memset,can shave a few tenth off. brows.gif
*
use of memset and setfsb is just to make lazy ppl from restarting the comp
for asus mobo's usually safer as whenever we restart it will does a immediate shut off spin of the HDD.. killing it easily..
sniper69
post Feb 8 2008, 06:14 AM

.: One Shot One Kill :. .+|Level 9 Type Shit|+.
*******
Senior Member
7,173 posts

Joined: Jan 2003
From: PCH
i've got this Qs... it's about DFI's BIOS Menu

What is...

1. Exit Setup Shutdown?
- Mode 1 (default)
- Mode 2

tried both, not finding any differences at all

2. Shutdown After AC Loss?
- Disable
- Enable

never tried though

3. OC Fail Retry Counter?
- 0
- 1
- 2
- 3

i set to 3

4. Clock VCO Divider?
- Auto (Recommended)
- 2
- 3
- 4

leave it auto as recommended

got a lot other, but think gonna ask this 4 first... unsure.gif
gsan
post Feb 8 2008, 08:50 AM

Electrical RF Engineer
*******
Senior Member
2,471 posts

Joined: Jan 2003
QUOTE(sniper69 @ Feb 8 2008, 06:14 AM)
i've got this Qs... it's about DFI's BIOS Menu

What is...

1. Exit Setup Shutdown?
- Mode 1 (default)
- Mode 2

tried both, not finding any differences at all

2. Shutdown After AC Loss?
- Disable
- Enable

never tried though

3. OC Fail Retry Counter?
- 0
- 1
- 2
- 3

i set to 3

4. Clock VCO Divider?
- Auto (Recommended)
- 2
- 3
- 4

leave it auto as recommended

got a lot other, but think gonna ask this 4 first... unsure.gif
*
3.
this option only available on 05/12 (beta) & 24/12 bios. it is actually how many times the mobo will reset the setting once the overclocking failed.

4.
this option works together with the fsb jumper setting on the mobo. and also, this setting mainly used for solve the double posting. for 1333fsb, select 2, 1066fsb choose 3 whereas 800fsb choose 4.
fesick
post Feb 8 2008, 07:34 PM

Serious mode
*******
Senior Member
2,009 posts

Joined: Oct 2006
From: My house
i think im fall in love with this mobo liao~
a1098113
post Feb 9 2008, 02:32 AM

~Retired~
*******
Senior Member
3,119 posts

Joined: May 2007
From: Home
wait till you fall in love with its PWM laugh.gif anyways its a beautiful board no doubt.
mfcm
post Feb 9 2008, 07:17 AM

Look at all my stars!!
*******
Senior Member
2,765 posts

Joined: Nov 2005
From: **Hornbills**
hey guys..have u tweak this mobo dy?how far u can go with this fsb?sniper done tweak the bios for ur e2140? brows.gif
sniper69
post Feb 9 2008, 10:24 AM

.: One Shot One Kill :. .+|Level 9 Type Shit|+.
*******
Senior Member
7,173 posts

Joined: Jan 2003
From: PCH
QUOTE(mfcm @ Feb 9 2008, 07:17 AM)
hey guys..have u tweak this mobo dy?how far u can go with this fsb?sniper done tweak the bios for ur e2140? brows.gif
*
so far tweaking those

32M SuperPI passed

3.2GHz - 1.5000VCore
DDR2 801MHz - 2.0VDIMM
NB - 1.5100V
SB - don't remember

tried Primed? doh.gif... auto-reboot cry.gif doh.gif shakehead.gif

user posted image

but, i'm not understand what is GTL or whatsoever unsure.gif
gsan
post Feb 9 2008, 10:44 AM

Electrical RF Engineer
*******
Senior Member
2,471 posts

Joined: Jan 2003
QUOTE(sniper69 @ Feb 9 2008, 10:24 AM)
so far tweaking those

32M SuperPI passed

3.2GHz - 1.5000VCore
DDR2 801MHz - 2.0VDIMM
NB - 1.5100V
SB - don't remember

tried Primed? doh.gif... auto-reboot cry.gif doh.gif shakehead.gif


but, i'm not understand what is GTL or whatsoever unsure.gif
*
your e2140 can do how far on the MARS before?
sniper69
post Feb 9 2008, 10:48 AM

.: One Shot One Kill :. .+|Level 9 Type Shit|+.
*******
Senior Member
7,173 posts

Joined: Jan 2003
From: PCH
QUOTE(gsan @ Feb 9 2008, 10:44 AM)
your e2140 can do how far on the MARS before?
doh.gif, never got a chance to try E2140 on Mars le... sold Mars long before i got E2140 doh.gif sad.gif
cstkl1
post Feb 9 2008, 11:44 AM

Look at all my stars!!
Group Icon
Elite
6,799 posts

Joined: Jan 2003
QUOTE(gsan @ Feb 9 2008, 10:44 AM)
your e2140 can do how far on the MARS before?
*
dude thats because ure limited by NB strap..
-=J4cKa5s=-
post Feb 9 2008, 12:29 PM

Casual
***
Junior Member
354 posts

Joined: Jul 2005
From: B@tu p4H@t - J0Ho|2
Below is my screenshot... Run Prime95, Super PI 32M
user posted image

Dunno y i can OC my ram further 460Mhz 1:1. It won't boot up at all. No matter how i raise my vcore, vdram, it can't help.. sad.gif rclxub.gif Any solutions...???

My RAM is Ballistix DDR2 1066Mhz.

This post has been edited by -=J4cKa5s=-: Feb 9 2008, 02:37 PM
sniper69
post Feb 9 2008, 12:43 PM

.: One Shot One Kill :. .+|Level 9 Type Shit|+.
*******
Senior Member
7,173 posts

Joined: Jan 2003
From: PCH
QUOTE(-=J4cKa5s=- @ Feb 9 2008, 12:29 PM)
Below is my screenshot... Run Prime95, Super PI 32M
http://img182.imageshack.us/img182/1843/6600wifdfixx4.jpg

Dunno y i can OC my ram further 460Mhz 1:1. It won't boot up at all. No matter how i raise my vcore, vdram, it can't help..  sad.gif rclxub.gif  Any solutions...???

My RAM is Ballistix DDR2 1066Mhz.
*
too small dude, can't see anything...

This post has been edited by sniper69: Feb 9 2008, 12:44 PM
cstkl1
post Feb 9 2008, 01:02 PM

Look at all my stars!!
Group Icon
Elite
6,799 posts

Joined: Jan 2003
QUOTE(-=J4cKa5s=- @ Feb 9 2008, 12:29 PM)
Below is my screenshot... Run Prime95, Super PI 32M
user posted image

Dunno y i can OC my ram further 460Mhz 1:1. It won't boot up at all. No matter how i raise my vcore, vdram, it can't help..  sad.gif rclxub.gif  Any solutions...???

My RAM is Ballistix DDR2 1066Mhz.
*
reduce strength on rams

u have no choice since ure strap limited on this mobo.
« Next Oldest · Overclockers United · Next Newest »
 

48 Pages « < 6 7 8 9 10 > » Top
Add ReplyOptions
 

Change to:
| Lo-Fi Version
 0.0266sec    0.74    6 queries    GZIP Disabled
Time is now: 12th December 2025 - 08:09 AM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.