mine can

Im also thinking that higher HT link is better or not ? But last time didnt really feel the difference between 1000+ with 800+. What is the significant performance difference actually ?

I think its for the gaming experience.
Better gaming performance.

thanks a lot bro...
anyway the 10x multiplier one 2500MHz only ar?
but nvm ... i get a rough picture of that already
looks like it's the same memory performance that we will get,
thanks again

Yea...Mine totally cannot

-pWs-

try anything above 1000MHz and see

Cartack is dominating the 4000+ liao

---

Added on January 25, 2008, 10:10 pmYeah bro, if try 1000 above and what should we do to feel the difference ?

This post has been edited by mizivincible: Jan 25 2008, 10:10 PM

huhu...i tot u just wnt to see the ram speed..huhu .. i'll do better next time...

Last time I read about HTL, it is better to keep it below 1GHz. Above that may cause instability. But then I see most AM2 OCers nowadays OC above 1GHz

hehe. Seronok ko lenjan proc lama aku cartack. It can never boot at 3.2Ghz unless ko pakai WC or Dice. i almost managed to boot at 3.2 yesterday(b4 handed the proc to him). Ko lenjan dry ice kat lab mekanikal la wan haha.

edited:

damn streamyx .. double post

This post has been edited by dblooi: Jan 25 2008, 10:21 PM

[quote=mizivincible,Jan 25 2008, 10:09 PM]
Cartack is dominating the 4000+ liao

dominating?? not yet i think.... need to learn much more from u guys....

actually i not really sure as i use stock speed ( or underclocked clock speed) for daily usage
But experience tell me that 1200 HTL runs 0.1sec faster than 900HTL in super Pi 1M

This post has been edited by dblooi: Jan 25 2008, 10:42 PM

Talking bout Ht link, last time i boot 1240(310X4) my old sata hard disc kong. Since then never tried above 1000Mhz woo..

some guys claim that hardisk kong after oc HT link
how it kong? Hardisk cannot use anymore? Or system file corrupted?
What kinda file system that you are using? NTFS or FAT32?
sometimes unstable oc can cause this (system file corruped),
after u change back to stock speed then everything is good
But for FAT32 , it's damn troublesome sometimes ( may lead to hardisk kong as you mentioned earlier)
and i believe that it's not HT link oc that cause that,
it's probably your overclock is already out of the hardware's limitation ( your proc, mobo or ram )


check this out, 1800MHz HT Link on a K8 proc.
my hardisk still damn healthy until now



This post has been edited by dblooi: Jan 25 2008, 10:34 PM

bro soulfly,can u pass 32m wif lower vcore than 1.45 at 3.4ghz?

My current oc-ed .. Err, should i lower my HT link?

edited = and another question, there 2 temp kinda strange at speedfan there, at 127C what temp is that?

This post has been edited by za_az: Jan 25 2008, 10:41 PM

Why should you ? If its stable let it run high la no worries.

Biostar TF7050-M2?
I think you have to lower down your HT Link soon.
I could never get anything higher than 1300 HTL when i was using TF7050-M2
anyway, try push more
2500MHz mar

Well im using NTFS. What happened was my HD made clicking sound after the HT link is higher than 1100 and everything crushed and need to format balik. I wasnt suspecting the HT link jugak coz i've seen your result b4 using HIGH HT link but nothin happened. Maybe my HD too old kot, cant tahan the level of OC i was putting. But to be safe, i alwez set Ht link below 1000Mhz, malas nk beli new HD for the time being huhu