@Kabu
Yup.. 4G with 1:1 ratio.. That what im waiting for actually. At the end it come true. But anyways, i dont wanna do the mod la. As i dont have backup mobo with me. Once this 1 'kong' then im going to dead for times. Otherwise, go ur house dig ur socket A borrow me.

@Pengster
Owh? Ur GC cant handle CSS? Hm.. Never try mine with that game before. As i dont really like FPS game. If something like C&C 3 or NFS, i sure will play on it.

@herojack
nono....if can oc higher, northwood are better coz you can overclock more using stock HFS compare to prescott. hahahaha..... jk jk.

i know prescott is faster la.

the thermal paste can be buy at pc shop. the popular brand is like Artic Silver 5, AC MX2(fylon, correct or not? ) etc.

@herojack41
open your casing and see... there should have screws or clippers to hold your hsf.

comparing both AS5 and MX2 which perform better ? heard that MX2 is not conductor... so is safer to apply. true ar ?

@herojack41,

U PENANG LANG KAH?

where u stay?

@harojack
maybe you take picture of your cooler. so that we can help observe how to take out the cooler. if just the stock hfs, it should be quite easy to take out.

okok

easy la like this, just turn off the power, then unplug the 2 white clip to another side, then gently unplug the 4 clips that anchor the bracket. slowly remove it then together with fan+sink can take out already.

@Ray
Haha.. Hm.. Any nice codec intro? Wanna try the power of 4G! I will try the video out when im free. ProStreet? I guess the same is kinda long. I had raced over 30++ racing baru reach 6-8% complete. Nvm.. Such a good game need to take long time finish. Im disappointed with Carbon actually. I spend 15hrs to completed the game. But ProStreet kinda different as it almost like GT4.. More realistic on the driving part! That what im looking for.

@Kabu
Yup. I read about the review before. Something like flash the bios right? Anyways i dont plan wanna risk this mobo anymore. So just let it be at the original one will do. As i read from the article says that if modded to other bios, it cannot have better ram ratio. Just to gain extra 3-5% performance and wanna put the mobo on risk. I choose not to put on risk!

@Kabu
Yup.. 4G with 1:1 ratio.. That what im waiting for actually. At the end it come true. But anyways, i dont wanna do the mod la. As i dont have backup mobo with me. Once this 1 'kong' then im going to dead for times. Otherwise, go ur house dig ur socket A borrow me.

@Pengster
Owh? Ur GC cant handle CSS? Hm.. Never try mine with that game before. As i dont really like FPS game. If something like C&C 3 or NFS, i sure will play on it.

not to say cant handle la.but it gets laggy when there's heavy fighting going on.something around below 20fps.sometimes can even drop to 10fps if i play with bots.

so far after disabling PAT i can achieve 2700Mhz stable.on my old PSU. lol

@herojack
i thought yours is cooler master HFS, thats why i ask for the picture. but the picture is just normal HFS la.

ok, about the clip, slowly pull aside from the hole and pull up a bit so that it wont go back hole again. then do the same at the other side. just be careful and gentle.it should be fine. Good luck unpluging your hfs. if really cant do it, just get your technician and you observe how he take out the cooler. learn from expert ma.

i honestly can tell you that there is no such thing as temp too high become easy break, is the way of doing it is wrong. i never come across people that break the clip especially the intel 1. for amd socket A then it really neet some skills to remove and install it. you ask Edmin, he sure say socket A is the hardest to deal with. intel 1 all easy install. pentium 3 is a bit tricky, but once the pentium4 come out, all quite userfriendly. correct me if i am wrong.

aiyoh, kabu, u know i know lah, socket A heatsink, a bit of force can break the Mobo!

P4 one, sap sap water lah... bro herojack41, i seriously doubt your 'personal technician', sounds like chapalang technician/mechanic?... and your heatsink is original Intel heatsink, not 'coolermaster'! do not be confused!!!