hmm... after long time lurking around... decided to join da club also

P4(B) 2.4GHz @ 2.7Ghz | Asus P4P800S-X | 1x Kingston DDR333 512MB 1x Apacer DDR333 512MB | MSI GeForce4200 Ti

Can't get anymore powa from my p4 anymore... maybe coz my akuComel too comel ady

yeap... my mobo's a 848P chipset. and highest oc shud be @3Ghz or so but cannot even survive prime test for 1hr and @2.8Ghz only can tahan bout 4-6hr prime test. But then, its all on default voltage setting if i do not remember wrongly.
haha... sked ma... coz using akuComel psu ... buying that time still studying ma... on tight budget

@raymond
old school p4... and still rocking hard hope the dark force don't pull me to the dark side yet

@fylon
lol i do my prime test when i'm out for lunch/dinner ma... come back then only see result But cannot reach my target to stable @3Ghz aih... 300MHz extra is better than none i guess

btw, off topic jap... any nice agp gc to recommend? budget below rm250. else i stick back to my 4200ti

@kabukiawie
my 4200ti serve me well for 5years ady... but the cooler changed coz fan rosak and warranty expired one question. is the 4200ti enough to power up a 22 incher widescreen ? coz planning to upgrade my old kaputed 17" crt to a 22" ws.

@raymond
yeap... enjoyed it very much but been lurking around more than posting last time

pc fair @kl... more like human sardine can the crowd sometimes really make you to be not in the mood to go on looking for good bargain stuffs.

@pengster
nice psu you got there... going for sli setup ?

nfs:prostreet... hope the ps2 version will be as good as the pc version as my comp cannot even run nfs:carbon at medium settings

also Penryn quad will cost a bomb and Penryn dual going to cost a dynamite

must... must... must... resist the dark force

I'm not ~!! my pc won't let me play and no time to go grab the ps2 version

work OT all the way

open side panel = comp jadi dust collector need to dust once in a while to keep the computer clean. but can see the temperature drop... add a table fan... lagi drop banyak banyak

running mine with side panel close now... temp on full load = 46-50C... guess time to reapply AS5 but lazy la

This post has been edited by zeipher: Nov 19 2007, 04:18 PM

@herojack41
open your casing and see... there should have screws or clippers to hold your hsf.

comparing both AS5 and MX2 which perform better ? heard that MX2 is not conductor... so is safer to apply. true ar ?

my friend once ask me before why his proc so hot till the comp can only on for half an hour... coz too hot and comp auto shut down. then i ask him... wtf did you do with your comp, and he replied that he take out the cpu hsf and cleaned it. so i ask what thermal paste did you use but my friend stare back at me blankly and ask wtf is a thermal paste and i was like ask him to go lowyat get any thermal paste that he like since he not oc-ing his pc... take out the hsf and apply the thermal paste. woila... temp drop more than 25++++C

lucky him coz his on the super hot socket A cpu



no wonder my temp is getting hotter nowadays. lol. haven't reapply my thermal paste for past 4-5mths... but still, lazy la as my temp is still consider ok i think... load temp @46 - 48C depending on the weather

old school p4 rocks

will be watching tv series, anime and movies more than gaming on the p4 anyway... except for some occasional dota game once in a while

ms AS5 baru use 2 time only for 1++ year... still got around 70% like that. got mine for only rm20
after apply AS5 really can see the temp drop compare to the default blackie color thermal paste.

question. before reapply AS5 or MX2, we need to clean the remaining of the past thermal paste/grease right? just wondering the correct way of removing it.

just check my voltage yesterday... notice that my 12V rail drop to 11.75+V only

my akuComel dying ? tonight going back downclock to stock check check sin

any good psu to recommend? budget about RM150 i guess... coz planning for a lcd this month or so.

hopefully my p4 can stay with me for another couple of years since i mostly do my gaming on my console.

OT, any nice lcd with hdmi input available that don't cost more than Rm2k? planning for my future <dunno when> ps3

time to lepak at bulk/garage section

found batuPerak ST400 @rm170 and acbel E2 470W @around rm170 also... which is better? in terms of stability and for o/c. i know the batuPerak's is a quality psu but not so sure bout the acbel's.

kinda in dilemma here on choosing my next psu... decided to topup my budget to RM200. with my budget can get AcBel E2 Power 510 for ngam ngam RM200 or SilverStone ST400 for RM 169... both price according to how much they quote in the trade zone forum la. wanna ask weather the AcBel's is true power or not and how to check if it is true power ?

and before this i thought buying psu is a simple task

old school still rocking hard ~!

100+ cfm fan? the noise is no no but the air flow is yes yes

btw, is using 2 diff manufacturer ram will limit our ram o/c ability?