Outline ·
[ Standard ] ·
Linear+
Which 5G Modem is better?
|
jayko
|
Nov 22 2025, 04:05 PM
|
|
QUOTE(syahpian @ Nov 22 2025, 03:42 PM) yup2, upgrade myself through luci before this using sopek myqwrt, they using china version of openwrt, called immortalwrt as base firmware, not sure which version through https://www.sopeksemprit.xyz/as you already knew, the MTK CPU with 7981 chip has only limited openwrt support, mine is factory configured, after they tested and sold as it is, not much support will be provided, but I try to get back to the factory and see if I can get them to provide some tips and support for latest openwrt. lol. means while checking your link now, thanks man.
|
|
|
|
|
|
syahpian
|
Nov 22 2025, 04:06 PM
|
|
QUOTE(jayko @ Nov 22 2025, 04:05 PM) as you already knew, the MTK CPU with 7981 chip has only limited openwrt support, mine is factory configured, after they tested and sold as it is, not much support will be provided, but I try to get back to the factory and see if I can get them to provide some tips and support for latest openwrt. lol. means while checking your link now, thanks man.  btw, what is the actual model name for that 5g router?
|
|
|
|
|
|
jayko
|
Nov 22 2025, 04:08 PM
|
|
QUOTE(syahpian @ Nov 22 2025, 04:06 PM) btw, what is the actual model name for that 5g router?  Under Brand called PanelLen, model is ZX7891PD. they sell router without the 5G module. but I sent the module for them to flash to the software that support their board.
|
|
|
|
|
|
jayko
|
Today, 12:04 PM
|
|
QUOTE(eauyong @ Nov 20 2025, 09:41 PM) It is possible to flash a chip especially the Winbond 8-pin SOIC by the CH341A 24 25 Series EEPROM Flash BIOS USB Programmer Module + SOIC8 SOP8 Test Clip For EEPROM 93CXX _ 25CXX _ 24CXX _ on board - No need to unsolder. I have done that for a motherboard few years ago but now forgotten already. Still have two programmers, this CH341A and a very old but capable WELLON VP-38B+ bought in 2005 from weilei.com.cn (Windows XP). just open the box. spi is wson-8. and the chip is circle by the aluminum bracket which provide support for high frequency shielding . look at the picture. w25n01gvze1g which is 128MB. thinking of upgrade it to 512MB to run full fledge openwrt. but not confirmed yet. the bracket is solder to the pcb is quite hard to remove. and don't want to mess up. will check with supplier first. This post has been edited by jayko: Today, 12:04 PM
|
|
|
|
|