Welcome Guest ( Log In | Register )

Bump Topic Add Reply RSS Feed
137 Pages « < 114 115 116 117 118 > » Bottom

Outline · [ Standard ] · Linear+

 Motorcyclist Thread V3 !, version 3 edi??

views
     
ubuntu
post May 19 2010, 10:46 AM

On my way
****
Senior Member
620 posts

Joined: Dec 2006
QUOTE(leinnz @ May 18 2010, 10:14 AM)
yes you can use. not sure upgrade 2t will provide better runs. but ok la.
Check on ur new tyre. Is the tyre lumpy? normally is the tyre problem. as ur rim is new
*
I checked my front tyre, still in good condition. I try spin my front rim, seems like the rim has a bit bengkok. Will go back to that shop again this weekend.

QUOTE(alexei @ May 18, 2010, 8:57 pm)

lennz is right, you can just mix in the synthetic 2T to the mineral that you're already using.
Though I would recommend that you use until the 2T almost finish, then top up with the new one.
That BHP FB shouldn't be synthetic, if I'm not mistaken, but good enough for daily ride. You should notice the reduced white smoke. Given my experience with Shell FB 2T, the smoke is still quite noticeable.

Let me know how this new 2T turns out. Hope the additional 2ringgit is worth it.

As for your steering problem, there can be many possibilities. Suggest you bring back to the mechanic for check. smile.gif

Added on May 18, 2010, 9:00 pmOh, I used to ride my friends SS. It goes up to 130kmh no sweat. That was many years ago. I was riding my Yamaha sports since then.
*
Yeah, the BHP 2T that I bought is normal mineral oil, once the petronas 2T almost finish, will use this BHP 2T. I think my rims might be the problem. Emm... It looks like the 125zr sport rims, but is not branded.
alexei
post May 19 2010, 08:12 PM

Biker Mice from Mars
******
Senior Member
1,879 posts

Joined: Jan 2003
From: Medan, ID
not new rim eh?
ubuntu
post May 20 2010, 02:04 PM

On my way
****
Senior Member
620 posts

Joined: Dec 2006
QUOTE(alexei @ May 19 2010, 08:12 PM)
not new rim eh?
*
It's new rims, but no brand.. Is it imitation product? hmm.gif
leinnz
post May 20 2010, 03:37 PM

oldfags
*****
Senior Member
755 posts

Joined: May 2005
From: Back to the Historic
QUOTE(ubuntu @ May 20 2010, 03:04 PM)
It's new rims, but no brand.. Is it imitation product?  hmm.gif
*
Rim brands not sure la. a lot frens bought racing boy rims..
anyway i am still using still rims.
y coz my area has lots of pothholes. Sport rims is no no around my area.
When my rim bengkok i can tune it back again.hehehe

This post has been edited by leinnz: May 20 2010, 03:38 PM
ubuntu
post May 20 2010, 08:22 PM

On my way
****
Senior Member
620 posts

Joined: Dec 2006
QUOTE(leinnz @ May 20 2010, 03:37 PM)
Rim brands not sure la. a lot frens bought racing boy rims..
anyway i am still using still rims.
y coz my area has lots of pothholes. Sport rims is no no around my area.
When my rim bengkok i can tune it back again.hehehe
*
Can anyone recommend me which motor SC give reasonable price for accessories and full service in PJ or Subang? I just went to a SC, according to the worker, their service charge for full service is RM30, not including change engine oil, change air filter and etc. According to him, if bike no problem, no part wear out, full service+service charge is around RM58 to RM60++. Is the price reasonable?
leinnz
post May 20 2010, 09:43 PM

oldfags
*****
Senior Member
755 posts

Joined: May 2005
From: Back to the Historic
hmmm
full service normally chg spark plug, gasket ring, clean the piston head carbon, air filter, ekzos cleaning etc for ur SS2 am i rite. Not sure but previously i paid 50 as well on my 2 stroke suzuki RR. am riding a lagenda so not needed a full service
alexei
post May 20 2010, 11:28 PM

Biker Mice from Mars
******
Senior Member
1,879 posts

Joined: Jan 2003
From: Medan, ID
I'd say RM50 is about that lah. I would stay and watch their work. Ask them what they do for full service loh... Like LEINZZ said, that's about the whole package lah.

Last time, I observed a training mechanic use the air gun to force a screw into my bike, almost destroying the screwthread on the bike frame. This is the kind of shops I avoid, never go back anymore.

Sometimes, they would remove all the bolts and nuts and misplace them... and then cincai mix them up and reattach. I am fussy and absolutely hate this kind of work quality.
Azuma-kun
post May 23 2010, 02:35 AM

Sayonara Toriyama-sensei
*******
Senior Member
8,415 posts

Joined: Nov 2005
From: Malaysia
guys, how much to get a bike license? at 1st i plan to get b full but after searching, suddenly interested to get Ninja 250R
leinnz
post May 23 2010, 10:18 AM

oldfags
*****
Senior Member
755 posts

Joined: May 2005
From: Back to the Historic
QUOTE(Azuma-kun @ May 23 2010, 03:35 AM)
guys, how much to get a bike license? at 1st i plan to get b full but after searching, suddenly interested to get Ninja 250R
*
I'd recommend taking B full. Well price varies as ahemm ahemm in some places.
example, Melaka is 400RM johor is 300Rm
heavencloud
post May 23 2010, 12:11 PM

Casual
***
Junior Member
346 posts

Joined: Jun 2008
From: On the Heavenly Cloud
QUOTE(Azuma-kun @ May 23 2010, 02:35 AM)
guys, how much to get a bike license? at 1st i plan to get b full but after searching, suddenly interested to get Ninja 250R
*
lulz... we have a same interest in mind laugh.gif planning to take the license this year and the 250R next year as i wanna pay a big d/p. I heard the new 250R with injection system is coming around July. Went to a few bikes shop yesterday, most of them no more selling new 250R as they are waiting for the new 250R to come nod.gif
alvinscboyz
post May 24 2010, 05:53 PM

Casual
***
Junior Member
376 posts

Joined: Oct 2009
Today i went to motor shop,i ask for TS carburetor.then they give me....ts 100 carburetor..they say same with ts 125 ?...no idea with it.after it ...they start install the ts carb to my bike.....the Intake Assemble original no suitable....might have to change new one for bigger hole.....fine,then i just ignore it..until everything done,When start engine and throttle ,the carburetor leaking fuel...i ask the boss he say is overfloat. i was cry.gif with that saw the caburetor leaking..They remove the air filter too.

What i wan to knw is,carburetor leaking during overfloat is normal?
BRAND= MIKUNI original
DAMAGE= RM230carburetor ts100 + RM10 service charge

This post has been edited by alvinscboyz: May 24 2010, 05:55 PM
Aaron135LC
post May 24 2010, 09:33 PM

Casual
***
Junior Member
360 posts

Joined: Nov 2009
From: Penang
hah.. alexei is also in this thread.. i guess i'm comin in here for more news.. and learn more about bike.. =)

is the front list updated always..?

Aaron135LC - yamaha 135LC SS

This post has been edited by Aaron135LC: May 24 2010, 09:35 PM
alexei
post May 24 2010, 09:41 PM

Biker Mice from Mars
******
Senior Member
1,879 posts

Joined: Jan 2003
From: Medan, ID
--delete old useless post--

This post has been edited by alexei: Jun 7 2011, 08:17 PM
alvinscboyz
post May 25 2010, 12:13 AM

Casual
***
Junior Member
376 posts

Joined: Oct 2009
QUOTE(alexei @ May 24 2010, 09:41 PM)
Is it a brand new carb? How many mm (milimeter) the carb? Sounds expensive for a 100cc carb...
What bike you use it on?

When it is leaking, does it come out from the drain pipe? If that's the case, then it is called 'overflow'. In your case, it is most likely the carb already too old stock, and the float seal already broken... need service and change float seal. Imagine like your tangki simbah in the toilet... after you flush, it will fill the tank itself. When the valve rosak, then the water keep filling up the tangki and excess water will flow out from the side drainage...

Added on May 24, 2010, 9:43 pm
hehe...
*
ya brand new...original ts carb
it doest leaking when normal drive...just when they settiing the carb..they full throttle ,the hole which is face to ground got fuel came out....as long as ok now....
is tat normal? rclxub.gif
alexei
post May 25 2010, 12:21 AM

Biker Mice from Mars
******
Senior Member
1,879 posts

Joined: Jan 2003
From: Medan, ID
hole facing to ground? do you mean those pipes connecting from the carb one? Normally there are air hose, fuel hose and overflow hose...
alvinscboyz
post May 25 2010, 12:33 AM

Casual
***
Junior Member
376 posts

Joined: Oct 2009
QUOTE(alexei @ May 25 2010, 12:21 AM)
hole facing to ground? do you mean those pipes connecting from the carb one? Normally there are air hose, fuel hose and overflow hose...
*
erm overflow hose i think....the hose didnt have any pipe to connecting..is that normal??

This post has been edited by alvinscboyz: May 25 2010, 12:44 AM
alexei
post May 25 2010, 06:54 AM

Biker Mice from Mars
******
Senior Member
1,879 posts

Joined: Jan 2003
From: Medan, ID
normal, I guess. I'd suggest getting a pipe, or a rubber hose for that, to prevent fuel from falling onto your paint.
alvinscboyz
post May 25 2010, 09:33 AM

Casual
***
Junior Member
376 posts

Joined: Oct 2009
QUOTE(alexei @ May 25 2010, 06:54 AM)
normal, I guess. I'd suggest getting a pipe, or a rubber hose for that, to prevent fuel from falling onto your paint.
*
the fuel just falling to my cylinder head which is almost touch the gasket ...
LYR
post May 29 2010, 12:57 AM

No one is indispensable
******
Senior Member
1,866 posts

Joined: Apr 2006
i'm riding Honda wave 125. there's a sticker on the engine recommending Castrol and i just changed to Castrol Race 4T 20w-40. i wonder which oil is suitable. i rarely use this bike, sometimes once a week but sometimes continuously for few days. mostly from cold start.
alexei
post May 29 2010, 03:19 AM

Biker Mice from Mars
******
Senior Member
1,879 posts

Joined: Jan 2003
From: Medan, ID
should be ok... learn to feel the engine responds, and service at factory recommended interval. smile.gif
« Next Oldest · Car Clubs · Next Newest »
 

137 Pages « < 114 115 116 117 118 > » Top
Add ReplyOptions
 

Change to:
| Lo-Fi Version
 0.0202sec    0.35    6 queries    GZIP Disabled
Time is now: 27th November 2025 - 08:05 PM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.