bro. i met an issue with toe and torque steer.
old workshop did -0⁰7' toe out all was fine

so im changing tyres in new workshop who put everthing to 0⁰

otw back i driving straight, steering direction keep on change between left and right bias, depend on gas pedal.
complain to shop, foreman told me chassis leg broken so fix them first.

u got idea?

yes. tyre & all mess up d. i found another proper shop with knowledgeable young sifu.

after i mention to him, he test driving (long) before attach car to machine. just one time job. resolve with satisfaction.

btw it is generic brand not hunter

Hey guys!

Planning to do tire swap and balancing with 3rd party shops instead of doing it at SC

Any shop to recommend in Klang Valley? I heard good things about

Btw do these shops remove the balancing weight or do they keep on adding more and more as time passes by if required?



Is Kee Hin the go to and king of rims?

Hey guys!

Planning to do tire swap and balancing with 3rd party shops instead of doing it at SC

Any shop to recommend in Klang Valley? I heard good things about

Btw do these shops remove the balancing weight or do they keep on adding more and more as time passes by if required?



Is Kee Hin the go to and king of rims?

balancer weights ideally removed and then run it on the machine.

however i can tell you 90% of the shops the balancers have never been calibrated over the years. Another issue is the weights, some of these cheapo weights will have you chassing weights, keep adding and keep removing and back and forth. My personal rule, if i need to add more then 30g, i end up getting the shop to rotate the tire on the rim. and try again.

one of the wheel balancers that i love are hunter's, normally only found in premium shops. These machines are spot on. Those shops cost more to do the balancing but ive never had an issue, and with the smart weight option, they will rotate the tire on the wheel to minimize the amount of weights used.

Hi Calvin,

I've been patronising Kim Heng  SS14/1 for a decade or two for their quality workmanship and friendliness.
About a month ago they did an internal patching (not plug type) on my Avanza rear left nail-punctured tyre.
During tyre balancing, and to my'surprise' they took the trouble to zero out completely the unbalanced "outside 5 grams inside 5 grams combo" out-of-balance tyre on a non-steering rear wheel - a scenario some or most tyre shops would call it quit and consider job done.

Another tyre shop recommended by someone in this thread is Weng Tat along the same road, which I find it's space is tight and crowded.

Tyreplus- SL Car Care Klang is another tyre shop I would recommend.

Hope it helps.

Note: I visited Kee Hin some two years ago for a wheel alignment correction job on my Avanza, not for accelerated tyre wear problem which my Avanza didn't have,  but for normal and 'simple' problems of car drifting/pulling to left hand side and steering wheel crooked/off centre to one side.
Instead of resolving them, the two problems had gotten worse immediately *after* the job.
Hence, beware of it's wheel alignment competency!

balancer weights ideally removed and then run it on the machine.

however i can tell you 90% of the shops the balancers have never been calibrated over the years. Another issue is the weights, some of these cheapo weights will have you chassing weights, keep adding and keep removing and back and forth. My personal rule, if i need to add more then 30g, i end up getting the shop to rotate the tire on the rim. and try again.

one of the wheel balancers that i love are hunter's, normally only found in premium shops. These machines are spot on. Those shops cost more to do the balancing but ive never had an issue, and with the smart weight option, they will rotate the tire on the wheel to minimize the amount of weights used.

Generally concur with your position above, bro.
Are you referring to Road Force Balancer, vs the conventional static/dynamic balancers commonly found in almost all local tyre shops?

Does anyonw know how much does Weng Tat Tyre Service or Kim Heng charges for Alignment and Balancing for Honda HRV?

Lately for a punctured tyre, I paid Kim Heng RM10 for balancing and RM3x(?) for internal mushroom patching.

It charges RM10 for external plug type repair.

No idea for Weng Tat though.

I send my car for alignment as when drive straight the steering is turn right.....
But the shop when do alignment no pump all 4 tyre balance....
But after done, drive steering not steering to right anymore...
But when I send the same car few weeks again to check brake...
The alignment feel off and steering need turn to right abit to keep car straight....
Should I just send to service centre or find other shop?

IMO bring back to the same shop. If that still doesn't work. Then bring else where.

Hi guys. Can recommend 15inch tyre that can last long and good price?
Second car seldom drive, just need to replace the aging tyre since i saw a few small line crack on the side already. The current tyre around 3years old.

Hi guys. Can recommend 15inch tyre that can last long and good price?
Second car seldom drive, just need to replace the aging tyre since i saw a few small line crack on the side already. The current tyre around 3years old.

I send my car for alignment as when drive straight the steering is turn right.....
But the shop when do alignment no pump all 4 tyre balance....
But after done, drive steering not steering to right anymore...
But when I send the same car few weeks again to check brake...
The alignment feel off and steering need turn to right abit to keep car straight....
Should I just send to service centre or find other shop?

As far as the technical manuals of branded tyre manufacturers across the world is concerned small hairline cracks, a few or many in the sidewall or tyre edges is NOT the criteria for the tyre to be replaced.

Besides, aftermarket tyres (of traditional branded manufacturers -western and Japanese) have a specified lifespan of 10 years after manufacturing dates as embossed on all sidewalls of all tyres.

I would expect manuals ( if available in English) of Korean and some or most of China brands available locally would mention it's lifespan of 10 years.

This 3 year old tyre has a long way to go, unless it's sidewall's structure is punctured - which is about the only criteria (other than bulges) for replacement of tyres below 10 years.

Even though you didn't drive often, make sure to always pump tire air. You still can use if there is hairline cracks. But not for heavy load or long distance only city speed and continue to monitor. Worst come to worse, replace with 2nd hand tire