Welcome Guest ( Log In | Register )

83 Pages « < 17 18 19 20 21 > » Bottom

Outline · [ Standard ] · Linear+

Home Networking Ditch ONU, use GPON SFP on Business Grade Router, 2.5G ONU for Unifi & Maxis, NO NEED VLAN

views
     
Gaara92
post Jan 5 2022, 09:49 PM

Herald
****
Junior Member
612 posts

Joined: Mar 2008


QUOTE(rezzorix @ Jan 4 2022, 08:15 PM)
Not getting this far. For this even with autoit the time is not enough.

Autoit can only login (username+pw) and then add echo 3 > /proc/fiber_mode

The next command will only be entered partially and then interrupted do to reboot happening.

Anyway I thought that this will already switch echo 3 > /proc/fiber_mode should already prevent the reboot, correct?

The point on Githhub says: "Quickly login and execute echo 3 > /proc/fiber_mode to avoid auto-reboot (invalid VS_AUTH_KEY)"

The total available time after reboot is max 4..5 seconds - there is no way of changing all the other variables because of that.
*
It should not auto reboot after you have changed the fiber mode. I dont know what is the problem, maybe @Anime4000 can help. ( I dont know how to tag people on this forum)
rezzorix
post Jan 5 2022, 10:55 PM

Getting Started
**
Junior Member
98 posts

Joined: Nov 2021
QUOTE(Gaara92 @ Jan 5 2022, 09:49 PM)
It should not auto reboot after you have changed the fiber mode. I dont know what is the problem, maybe @Anime4000 can help. ( I dont know how to tag people on this forum)
*
Gaara92 Tagging:
CODE
[@Nickname]


Maybe I just should buy a model that people here have already and use successfully...

Which one do you have?
Gaara92
post Jan 6 2022, 08:10 AM

Herald
****
Junior Member
612 posts

Joined: Mar 2008


QUOTE(rezzorix @ Jan 5 2022, 10:55 PM)
Gaara92 Tagging:
CODE
[@Nickname]


Maybe I just should buy a model that people here have already and use successfully...

Which one do you have?
*
Buy this one https://item.taobao.com/item.htm?spm=a1z09....id=597031866488 it is a stable one.
TSAnime4000
post Jan 6 2022, 12:41 PM

Look at all my stars!!
*******
Senior Member
2,400 posts

Joined: Jul 2009
From: /dev/null


QUOTE(rezzorix @ Jan 3 2022, 12:51 PM)
That worked.
The part I missed was adding it under an Interface List  rclxms.gif
Now need to figure out the TIME broadband configuration

user posted image
*
This in EPON mode, you need set "PON_MODE 1" become GPON mode

However, I think it should work with TIME without needing to change firmware, if... original firmware dont bridge successfully
Gaara92
post Jan 9 2022, 09:47 AM

Herald
****
Junior Member
612 posts

Joined: Mar 2008


QUOTE(Anime4000 @ Jan 6 2022, 12:41 PM)
This in EPON mode, you need set "PON_MODE 1" become GPON mode

However, I think it should work with TIME without needing to change firmware, if... original firmware dont bridge successfully
*
My GPON SFP returned error empty response when trying to open webgui. Happened after I reboot router, only can access thru CLI now lol. This happened after I deleted the config partition

TSAnime4000
post Jan 10 2022, 01:01 AM

Look at all my stars!!
*******
Senior Member
2,400 posts

Joined: Jul 2009
From: /dev/null


QUOTE(Gaara92 @ Jan 9 2022, 09:47 AM)
My GPON SFP returned error empty response when trying to open webgui. Happened after I reboot router, only can access thru CLI now lol. This happened after I deleted the config partition
*
need a NAND programmer, mine haven't arrive yet, no local shop sell advanced stuff like this.
maybe can use my config partition? not sure how to pull it
TSAnime4000
post Feb 13 2022, 08:14 PM

Look at all my stars!!
*******
Senior Member
2,400 posts

Joined: Jul 2009
From: /dev/null


I have updated guide for RTL9601C1 based SFP ONU
https://github.com/Anime4000/RTL9601C1/blob.../Setup_Stick.md

Last night, I re-run settings which property TM need:
1. TM OLT doesn't care MAC Address
2. TM OLT need PLOAM Password
3. TM OLT need correct Serial Number (only check first 8 digit or 4 character, example: 48575443 or HWTC)
4. TM OLT need correct OMCI Info (because OLT can send firmware update using OMCI, not TR069)

In summary:

ONU Auth
CODE

flash set GPON_PLOAM_PASSWD 0123456789
flash set GPON_SN ALCL00000000


OMCI Info
CODE

flash set GPON_ONU_MODEL G-240G-E
flash set PON_VENDOR_ID ALCL
flash set OMCI_SW_VER1 3FE46606BGCB45
flash set OMCI_SW_VER2 3FE46606BGCB45
flash set CUSTOM_OMCI_SW_VER1 3FE46606BGCB45
flash set CUSTOM_OMCI_SW_VER2 3FE46606BGCB45
flash set HW_HWVER 3FE48153CBAA


Faking OMCI
CODE

flash set OMCI_FAKE_OK 1
flash set OMCI_OLT_MODE 1


V2801 Auth Key (avoid stick begin auto reboot, it ties with ELAN_MAC_ADDR and HW_HWVER)
CODE

flash set ELAN_MAC_ADDR 781735000000
flash set VS_AUTH_KEY EF0FC1A970A27D52DF340835F0561507


4-port ONU Emulation
TM using 4-port ONU in Bridge mode.
Not all stick are compatible n-Port Emulation, thankyou SFP ZTE Stick only work on LAN 1.

EdgeRouter SFP issue
All SFP XPON ONU Stick are 1GbE only, some time EdgeRouter attempt to negotiate 10 or 100MbE mode on SFP which Stick are not supported
You need force "Speed/Duplex" in 1000/full in order to work!

This post has been edited by Anime4000: Feb 13 2022, 08:29 PM
lwk523
post Feb 16 2022, 02:54 PM

Premium Q Trader
******
Senior Member
1,040 posts

Joined: Mar 2006


Hi,

Does anyone know to where can get huawei ma5671a come with Openwrt firmware ?


user posted image

This post has been edited by lwk523: Feb 16 2022, 02:55 PM
TSAnime4000
post Feb 17 2022, 03:06 AM

Look at all my stars!!
*******
Senior Member
2,400 posts

Joined: Jul 2009
From: /dev/null


Gaara92 miloaisdino

Today I just manage bypass Maxis VoIP, can ditch TP-Link Archer C5v!!!


Method Not Allowed in first attempt...
Attached Image

not soon after.....

MicroSIP connected to Maxis VoIP biggrin.gif biggrin.gif biggrin.gif
Attached Image

I going to test more, probably buy VoIP/IP Phone and I share to Maxis Users how to setup VoIP using IP Phone

This post has been edited by Anime4000: Feb 17 2022, 03:16 AM
TSAnime4000
post Feb 17 2022, 05:24 AM

Look at all my stars!!
*******
Senior Member
2,400 posts

Joined: Jul 2009
From: /dev/null


Update...
Gaara92 miloaisdino

Maxis Home VoIP accepted codec:
1. G.711 A-law
2. G.711 u-law

SIP Proxy:
homegw01.maxis.com.my:5060
This should for NAT Pass-through, Accepted network: VLAN 822, 4G, 4G NAT/hotspot, PPPoE WAN
Rejected Network: PPPoE NAT (from LAN), Non-maxis network

SIP Server:
homesip.maxis.com.my (14.192.234.109)
Only routable inside proxy

Source Port:
ANY

Maxis VoIP CALL via MicroSIP is working!
Attached Image

Making call seem need build Dail Prefix, copy TP-Link Archer C5v prefix and paste into MicroSIP cause forbidden number?
hjack
post Feb 17 2022, 08:57 AM

Getting Started
**
Junior Member
281 posts

Joined: May 2012
QUOTE(Anime4000 @ Feb 17 2022, 03:06 AM)
Gaara92 miloaisdino

Today I just manage bypass Maxis VoIP, can ditch TP-Link Archer C5v!!!
Method Not Allowed in first attempt...
Attached Image

not soon after.....

MicroSIP connected to Maxis VoIP  biggrin.gif  biggrin.gif  biggrin.gif
Attached Image

I going to test more, probably buy VoIP/IP Phone and I share to Maxis Users how to setup VoIP using IP Phone
*
Bravo!
If you could configure this into TM supplied ONU, even better biggrin.gif
SUSnonamer
post Feb 17 2022, 10:08 AM

Getting Started
**
Junior Member
224 posts

Joined: Apr 2019
...................

This post has been edited by nonamer: Feb 20 2022, 05:11 PM
lwk523
post Feb 17 2022, 03:27 PM

Premium Q Trader
******
Senior Member
1,040 posts

Joined: Mar 2006


QUOTE(Anime4000 @ Feb 17 2022, 05:24 AM)
Update...
Gaara92 miloaisdino

Maxis Home VoIP accepted codec:
1. G.711 A-law
2. G.711 u-law

SIP Proxy:
homegw01.maxis.com.my:5060
This should for NAT Pass-through, Accepted network: VLAN 822, 4G, 4G NAT/hotspot, PPPoE WAN
Rejected Network: PPPoE NAT (from LAN), Non-maxis network

SIP Server:
homesip.maxis.com.my (14.192.234.109)
Only routable inside proxy

Source Port:
ANY

Maxis VoIP CALL via MicroSIP is working!
Attached Image

Making call seem need build Dail Prefix, copy TP-Link Archer C5v prefix and paste into MicroSIP cause forbidden number?
*
icon_rolleyes.gif icon_rolleyes.gif This is great !! Thanks
developer
post Feb 21 2022, 07:07 PM

Getting Started
**
Junior Member
285 posts

Joined: Jan 2006


QUOTE(Anime4000 @ Feb 13 2022, 08:14 PM)
EdgeRouter SFP issue
All SFP XPON ONU Stick are 1GbE only, some time EdgeRouter attempt to negotiate 10 or 100MbE mode on SFP which Stick are not supported
You need force "Speed/Duplex" in 1000/full in order to work!
*
just a question on SFP GPON ONU stick, those in the market is 1GbE right?

if i am subscribed to TIME 1Gbps plan and wanna fully utilize the download, do i need to look for a SFP+ GPON onu stick or which setup would you recommend?

currently the ISP provided setup max out at 920Mbps.

Thanks
TSAnime4000
post Feb 21 2022, 09:12 PM

Look at all my stars!!
*******
Senior Member
2,400 posts

Joined: Jul 2009
From: /dev/null


QUOTE(developer @ Feb 21 2022, 07:07 PM)
just a question on SFP GPON ONU stick, those in the market is 1GbE right?

if i am subscribed to TIME 1Gbps plan and wanna fully utilize the download, do i need to look for a SFP+ GPON onu stick or which setup would you recommend?

currently the ISP provided setup max out at 920Mbps.

Thanks
*
TWCGPON657 with 2.5GbE Firmware patch seem can run SGMII at 2.5GbE

Mikrotik RB5009 or CCR2004 seem support 2.5GbE

Here hack ONU run at 2.5GbE
developer
post Feb 21 2022, 09:38 PM

Getting Started
**
Junior Member
285 posts

Joined: Jan 2006


QUOTE(Anime4000 @ Feb 21 2022, 09:12 PM)
TWCGPON657 with 2.5GbE Firmware patch seem can run SGMII at 2.5GbE

Mikrotik RB5009 or CCR2004 seem support 2.5GbE

Here hack ONU run at 2.5GbE
*
May i ask where can i get the TWCGPON657 ? I cant find it in tb and sp
TSAnime4000
post Feb 21 2022, 09:41 PM

Look at all my stars!!
*******
Senior Member
2,400 posts

Joined: Jul 2009
From: /dev/null


QUOTE(developer @ Feb 21 2022, 09:38 PM)
May i ask where can i get the TWCGPON657 ? I cant find it in tb and sp
*
I bought it here: https://item.taobao.com/item.htm?spm=a230r.....2f9df056eAKXY3

Currently I use TWCGPON657 with V2801F firmware to work with TM-Maxis
Gaara92
post Feb 22 2022, 06:47 PM

Herald
****
Junior Member
612 posts

Joined: Mar 2008


QUOTE(Anime4000 @ Feb 21 2022, 09:41 PM)
I bought it here: https://item.taobao.com/item.htm?spm=a230r.....2f9df056eAKXY3

Currently I use TWCGPON657 with V2801F firmware to work with TM-Maxis
*
I have not got in hand this TWC GPON because I am lazy to buy thru taobao, seems complicated because of the language even I can use google translate.
TSAnime4000
post Feb 22 2022, 10:34 PM

Look at all my stars!!
*******
Senior Member
2,400 posts

Joined: Jul 2009
From: /dev/null


QUOTE(Gaara92 @ Feb 22 2022, 06:47 PM)
I have not got in hand this TWC GPON because I am lazy to buy thru taobao, seems complicated because of the language even I can use google translate.
*
I plan to buy same stick as yours to experiment with, seeing many view my git repository, hope they fix n-Port Emulation because TM using it
izhamsatria
post Feb 22 2022, 11:28 PM

Getting Started
**
Junior Member
124 posts

Joined: Mar 2012


Will this ONU stick from FS.com work?

https://www.fs.com/sg/products/133619.html

83 Pages « < 17 18 19 20 21 > » Top
 

Change to:
| Lo-Fi Version
0.0228sec    0.83    6 queries    GZIP Disabled
Time is now: 18th December 2025 - 11:57 AM