Sanko what PSU you using?

corsair HX620W. i never had heat problem with that psu. but just now when i touch it, damn... it was so hot!

How come? The A05 airflow seems okay.

maybe my hdd too hot. sien...

sanko, change ur psu position, so that the fan will be right below ur hdd.. so hopefully it can suck out all the heat from both psu n ur raptor

i tried that already.... not much different. maybe because the hot air is trap inside the psu cause the air flow is being converted to the side. so it stuck in front in the middle before going to the side.

Your PSU uses a 120mm fan?

I need to know whether the casing would fit a silverstone strider 560W or not? Because the i scared the space for the PSU compartment would not fit the PSU with the bulging 120mm fan grill.

owh ya.. i thought the casing has hole at the back of psu just like normal casing.. so now apa lagi.. watercooled ur psu laa

crazy la like dat watercool ur psu

Nope it won't, I been cleaning all my cases with cleaning detergent ...

No problem at all .. coz it won't damage the surface at all ..

It just remove the dust and some oily finger prints...

nice tip doom.

Hehe, guess what i use to clean the casing?

Here's my rig. New A05B.

Sorry the image is blur and a bad angle.



Took me a long time for cable management and finally the cable isn't managed properly till had to skip 2 tuition lessons. Anyway i won't show you my cacings

im thinking of modding my G7 further..any idea to share?

@Polar_012

Are u sure it's fine for the processor to run with passive cooling on Ultra-120 ??

I thought Ultra-120 series required high CFM fan to utilize it's performance..

Anyway share some 'Cacing' over here ....

@kalakatu

Why on earth do u need to mod G7 ... it's a great case for both cable management and cooling performance...

to be honest, so far i satisfied for the cable management and airflow
i mean the mod that can transform it to a very fancy casing

Not very sure because my temps reading is totally wrong. Now showing at 22C at bios .

I put my fan 3-pin socket to the CPU fan header and the fan won't spin...had to off the smart fan method at bios.

Now installed a fan but i can't seem to install the fan clip properly. The air above my rams are cooler. Before this very hot.

This post has been edited by Polar_012: Jul 15 2007, 01:19 AM

Polar_012... more pic pls..
how much is this A05B?

finally can join u guys, hooted a LL A07 yesterday.

will post pict later when my rig is up

Sorry bro no camera, only got blurry handphone cam which probably shows nothing

A05B is RM348

This post has been edited by Polar_012: Jul 15 2007, 06:58 AM