Wanna ask expert here, X800GTO vs 7300GT, wic one better?

Hi,can someone suggest me what graphic card should i buy?.I use graphic card to play direct x 10 game. (budget is around rm450) and where to buy it?

Maybe you can go for 2900PRO as it's pretty cheap these days.

hi, whats the most common screen resolution for 17 inch LCD? normal usage.

1280x1024 seems to be the standard native resolution now if not mistaken

can someone help me?? how do i check my laptop temperture?? i'm using fujitsu lifebook S7111. thank u!

hey guys. heres the problem i suffered right now.

yesterday i try to OC my 7600GS with this setup :
original setting :
core bus=400MHz
memory bus = 400MHz

my overclocked setting :
core bus=515MHz
memory bus=415MHz

it is indeed a very stupid move. i know.
and the core speed i hav is like this



after quite some time play my LFS without any problem i try to play with rFactor. yeah..it crashes sometime. after that i turn off the pc and when i turn on again the startup screen all i cant see the only thing i can saw was blurry white image.

then, i take out the GC and try to turn on the pc with my on board GC, surprisingly it works well. then i try to install the 7600GS and all the driver and yet it works perfectly since lat night until 3pm's today before i turn off my pc.

but now i turn it on again the symptom comes one more time with all blank/blurry image at the sttartup screen. now im using on board GC once again and it works well.

well, the thing that makes me confused is, IF the card is really dead it wont even survive whole night right? in fact when i play LFS last night the FPS seems ok though.


ps:sorry for my noobness in PC's term

This post has been edited by camel90: Jan 10 2008, 10:59 PM

wat is the size of the AMD x2 fan proc (AM2) ?

if not mistaken, it is 70mm x 70mm

Your graphics card might be dead or going to die. Overclocking causes heat and prolonged heat without proper cooling will result in all these issues including artifacts, etc. Time to RMA

This post has been edited by clawhammer: Jan 11 2008, 03:03 AM

Hi guys,

i've recently bought a ATX casing where the PSU which is without a Sata Power Connector and i 've bought a Sata 2 Hdd which is without a Molex connector, what can i do now?

Molex to SATA power converter.Can find at LYP.

Hi all, I'm just want to ask a question or two here. So, given these two setup, whereby both will have the HD3870 512MB DDR4 as the GC:

a) Intel E2140(overclocked to E6750 speed, or more) paired with Gigabtye P35 DS3

b) Intel E6750 (stock) paired with Gigabyte P35 DS3

May I know how big is the real world performance difference between these two setup? Would it be significant? Also, how bad is the bottleneck between the two setups?

Also, may I know which mobo has better performance? DS3 or DS3R?

Thanks in advance.

P/S: Running at 1680x1050.

This post has been edited by Aquanox28: Jan 11 2008, 03:14 PM

i think the 7300GT will be better

i think 8600GT will fit ur budget

standard would be 1280x1024

which temperature u mean? chipset temperature? try speedfan, or nvidia monitor.

might be ur gc already damage due to the heat it generate, try run at stock speed, if that problem occur again, start ur window in safe mode then disable all the oc settings, if this problem still occur i think u hv to send back to factory/shop for RMA

not much different i can tell u, but it depends on wat games u run actually, some games tend to be more CPU dependent and some would be more on graphic card, bottleneck is still there watnever how u oc it, even if it has different, it wont be that significant, maybe just a few framerate increase which u cant actually feel it unless u're doing benchmarking.

does different BIOS version affecting or influencing the system's performance?

no, different BIOS only comes with different function, and it cannot be use with other motherboard.

Hi guys
I want transfer my old pc files to my laptop by LAN connection
but i cant get it done
after i connect a LAN cable between both of this pc (both oso xp)
no detection at all....

can u guys show me step by step to fixed it?
thx alot

---

Added on January 13, 2008, 2:16 amthis may help u
http://www.almico.com/speedfan.php

This post has been edited by VinceMSR: Jan 13 2008, 02:16 AM

eh i thought u need a cross link cable for tat?
ordinary lan cable should not be able to complete the connection

Difficult to say. Some bios updates fix big things, others just add features to the mobo/

May i ask a simple question here?
Is it ok that my gamepad always slot it cpu there without taking out all the time?