Hi,

Is it change brake pad outside will avoid warranty?

Hi bezzarian, I need some help here.

I own bezza advance 2016.
Recently after service, my bezza fuel consumption dropped from 14/litre to 11/litre which looks sudden and abnormal to me.

Previously the 1st bar of fuel always able to travel 50-80km

but now travelled 100km, 3 bars gone.

did anyone face similar situation and has solution?

no check engine light, so not sure what should be monitor or check.

Bezza Won't Start – Back to Perodua Service Center for the 2nd Time

Battery Reset Attempt:
I tried the internet-suggested method of disconnecting the negative (black) terminal from the car battery for over 20 minutes, then reattached it. Unfortunately, the car still wouldn’t start.

Jump-Start Attempt:
I even tried jump-starting the car using long cables connected to another car’s battery while it was running, but my car still refused to start.

Car History:
I bought the car in 2024 and collected it on 12/7/2024. The first breakdown happened on 17/11/2024, and it had to be towed to the Perodua Service Center. Less than 3 months later, on 31/1/2025, the same issue happened again, and my car was towed once more. 🤬

https://youtu.be/datESjlYRnU

Try get Liqui Moly fuel injector cleaner and use for 2-3 times then observe again.

Hope you will get your car up and running very soon.
Btw, do keep us updated on the root cause and solutions.

I have reported to Perodua portal and after few hours, the center called me to collect my car. They said they have done the so-called "recarbonized" - which is the cleaning/restoring the carbons deposits in the components such as fuel injection & valves. And this 2nd time incident is not related to electronic circuit board. Btw the symptom is exactly same as last incident

This post has been edited by vliamcoo: Feb 3 2025, 03:14 PM

Thanks for sharing the feedback from Perodua. The car is kinda new to have problem with carbon deposit, don't you think?

Hi! Everyone,

I planning for purchase Bezza for working as sales but heard that currently stock limited. Is it true?

Heard new gen bezza and myvi 2025 coming soon.

Hold on purchase, waiting new gen only purchase.

This post has been edited by jusbella: Feb 22 2025, 09:38 AM

wow thanks for your information.

do you know estimate when will launching?

U may Google around. According to paultan they mentioned early 2025.

okay thanks

Not sure if this real or rumour

The all-new Perodua Bezza (2nd gen, 2026) will use a new engine and transmission.

Here are the specifications:
Engine: 1.2L (1,196 cc) NA 3-cylinder 12-valve DOHC with Dual VVT-i technology
Compression ratio: 12.8:1
Transmission: D-CVT
Power: 88 PS at 6,000 rpm
Torque: 113 Nm at 4,500 rpm
Fuel consumption: 28 km/l (MDC)

Image by funtasticko.net

WOW different much. Thanks for your sharing but can't wait until 2026

Anyone facing issue with High Beam always ON? Even when the engine is off.
When knocking the fuse box area (below drawer), sometime it will goes off, if it doesn't, will pull the high beam power from bulb.
Check with some some 3rd party car repair, all said the relay that soldered on the board faulty, need RM1k+ to replace and re-tune.
Any advice would be appreciated. Tq.

The Bezza is around 8 year old and this thing happened suddenly. After knocking, sometime it can back to normal for many days then suddenly happen again.

Temporary can cabut the problem headlamp fuse first to avoid battery drain if not always use high beam. Try go Perodua SC for quotations, won't be rm1k+ that expensive.

Just bought a used unit year 2018. Older model. Mileage 85k km.

What should i look for dear owners? Is auto gear oil cooler something i must change first? Any good workshop to recommend?

How much did you purchase it for?

32.5k all in.

General market insurance value is only 27k so i paid a premium. I insure amount 32k and the insurance company accept it.

This post has been edited by Chisinlouz: May 27 2025, 12:36 PM

what spec u buy wor..dont tell me is X lehh..