lol... actually i compare the memory bandwidth 1000mhz with loose timing and 800mhz with tight timing is quite the same..

my objective on Ocing is just "OC how high for EE setting" lol.. quite true.. don't want to supply unnecessary voltage..

the thing is tight setup need to supply 2.2v of vdimm.. while loose is just need 1.95v..

setting up each part which reaching the wall limit taking up my time..
i need to figure out the basic option first before i dig out the sub-option..

on 2.7ghz cpu, 1000mhz ram.. no need to configure advance option..
why? i still donno.. maybe higher ram divider or memory controller matched...

i believe it's not becoz of ram.. coz i still can do memtest on different settings..

nut?
i think u should read somewhere else before asking like that...
no offence

any1 can help me solve this problem?


the memory speed in sisoft(296mhz) and cpuz(339.3mhz) is different...
and i only get 54% memory efficiency (out of 9472++mb bandwidth) wherelse last time can get at least 62% (out of 11000mb bandwidth)...
btw, im running dual channel all the time...

This post has been edited by smokey: Jun 20 2007, 05:01 PM

different setting different result... how do we know yours..
even change the ram timing will change the result...

but in other cases.. software reports incorrectly.. especially brisbane..
it just the matter of software picking up the wrong ram divider...

just came back from lowyat
took my TForce 570U that just came back from RMA..
and bought a new retail AMD X2 3600 Brisbane for only RM203

currently at 2.8GHz 1.275v DDR930 4-4-4-12 2T 2.1vdimm
will play more later..the target is 3.2GHz

Dem lah RM203, within a week already slash so much

Uik that easy meh? Some more with that timing

This post has been edited by afosz: Jun 20 2007, 09:29 PM

wtf???! 203 X_X!!!!
sh!t i still got brisbnaes in my hand which is already paid for at a higher price x_X!!!!!!! T_T"""

------------------------------------------------------------------------------------------------




what is wrong with this oc =/

mobo is abit kn9 ultra, using ac 64 freezer
-dimm voltage is 1.9v
-vcore is 1.275, ori is 1.25 ( tried pumping til 1.45v, still same problem)
i doubt its the ram, as its handpicked fpy-5 kvr 667, and tested it on ddr400 divider

This post has been edited by bryanyeo87: Jun 20 2007, 11:25 PM

-double post-
sorry

This post has been edited by bryanyeo87: Jun 20 2007, 11:13 PM

what is the correct divider for memory running at 533 for cpu multiplier 9.5?
7 or 8?

not sure, didnt chk, but all i know is the ram speed is alot less, hw come like this wor...=(

only other thing i can think of is psu...but psu is ok, coz i clocked a windsor 4200+ till 2.6ghz with vcore at 1.325 to see the limit =/

This post has been edited by bryanyeo87: Jun 20 2007, 11:59 PM

i bought at Robyncom Imbi Plaza..
just saw their thread at Garage Sales yesterday stated that the price is only RM205..
tried bargain till RM200, but they cant afford to give it, so they gave me RM203 instead...jadi la

scouted at lyp, the price is still RM230 and must be bundled together with motherboard...if not, need to add RM10 (some shops)..

easy? perhaps becoz im using D9?

please read the answer above

@bryanyeo87: I have the same problem as well. Try lower your HTT to 600, it works for me. Or if it still happens, try increasing vdimm, but I think the main reason is HTT. I've OCed to 250 and forgot to lower it to HTT 600. Although it still at 1000, but don't know. It just work for me

@kalakatu: Yeah, maybe so Crucial, the price is so cruel. But 667 can go up to 1080?? Waa, just wondering IF mine can or not Anyway, what's your status? Reached 3.0GHz yet?

i see...so i make it 250 x HTT multi @ 2?

i try 3x HTT multi ade...cant even post at 249 fsb...2x multi even worst...cant post at 230 fsb..but funny thing is, i can post at 260fsb while multi at 4x

is it my psu prob? or mobo =/

This post has been edited by bryanyeo87: Jun 21 2007, 01:44 AM

uhm..guys...i got a serious problem here..

actually the processor i bought got some bent pins..but i managed to insert into the socket..
after that, i reformat my pc, just wanna feel the new windows while overclocking..

but then, the problem came one after another..

here are some symptoms;

- BSOD (even at default clock and doing nothing)
- my antivirus suddenly shut off by itself (the red notification at the taskbar appear)
- suddenly cannot connect to the internet, or simply said got some error at LAN port (if i click at the LAN icon on Network Connection, the message "an error occurred...." popped out
- cannot paste and send to
- suddenly the pc will be slow like hell..the program will be opened 30 seconds after i double-clicked it
- the processor name didnt appear at System Properties, only the rams. but it stated at CPUZ, but like i said, 30 seconds after double-clicked
- window will suddenly hang/lag or not responding, require me tu push the reset/shut down button
- both message about Window Service 32 (something lidat lar) and shutdown countdown timer popped out almost 2~3 times in a row (this is the most annoying part)

er..i guess thats it..perhaps got summore..
anyway im on my sis's lappy right now..that pc cannot surf the internet..

so anyone can help me find the culprit? is it becoz of motherboard or the problem might be related to the bent pin that i just straightened before?

thanks

Bro,

Please include me as well .. TQ!

X2 3600+ Brisbane G1 | Worm77 | BIOSTAR TA690G AM2 | Mushkin DDR2-800 | THermaltake Big Typhoon | 2660Mhz

---

Added on June 21, 2007, 7:53 amI encountered the same problem as yours .. Everything running fine, sudden black out .. Restart PC, software prompted display driver recovered .. I don't think it's the RAM giving problem .. Most probably the display driver itself .. After few times that message popped up, I disabled the onboard VGA and got myself PCIe graphic card instead .. Solved the problem once and for all ..

This post has been edited by Worm77: Jun 21 2007, 07:53 AM

Bro, u still got ur TForce 550 ? Try shifting different components n test it out. Mayb u can find out which is giving u the prob. I think could b the mobo again. Otherwise, try to re-install ur windows again.