8tvt,
In my case, it's in default settings .. Countless times of restarting PC due to screen blackout lar, hang lar .. Got fed up and bought a graphics card .. Thought can save couple hundred of ringgit by using a built-in GPU MOBO .. In the end, the-thought-could-save ringgit still flew out from my wallet ..

You encounter any problems with onboard GPU or you used standalone GPU since day one??

kalakatu,
Like jy14 mentioned, test with different components, troubleshoot using trial and error method until you found the culprit .. Culprit could be the mobo .. If the processor failed, you would not be able to boot at all ..

This post has been edited by Worm77: Jun 21 2007, 10:09 AM

@kalakatu
see, if u bought the Brisbane from me now u wont have this rite? hehe =b, just kidding la, better rma if u can for the processor, test the mobo with diff processors, preferably a windsor core as its already stable to see if tis the mobo or proc problem..

@8tvt
i tested witha spanking brand new kvr667 from a friend, still same problem...htt will be jammed at 260fsb x 3 HTT, i pumped vcore to 1.45v...do i need to pump the HT voltage or the chipset voltage? really getting fedup d lol.............

This post has been edited by bryanyeo87: Jun 21 2007, 10:26 AM

@Worm77
default settings is ok... i never tried oc with built-in gpu...
or maybe u should place the ram on 3-4 slot..

@bryanyeo87
changing HT voltage or the chipset voltage won't be necessary...
brisbane hates overvolting.. maybe u should put 2.2v for the ram...

i see...brisbane hates overvolting....damn, back to countless jumper reset for bios later and upping the volts abit at a time...

by the way does bios versions affect the OC for abit kn9 series? currently using bios ver 20

the ram volts need to put so high meh...scared ade..coz last time i rmm i put it at 2.2v all my hdd's lost all my partitions and data

The rams are on slot 3 and 4 .. Nevermind lar .. I'm already using standalone GPU .. Wait for AMD to release new display driver and try later ..

i discussed with goldfries last night, and he said the bent part shouldnt be any problem..

well, i guess it was my mistake to connect to the internet (even for a while) without installing the AV and Firewall first..this might be a major cause, even i didnt expect it would be this much and i never encountered such problem before..

after reformatted last night, i install all the necessary drivers and softwares first without plug-in the network cable..after i installed and updated my AVG and Ad-Aware (downloaded the definitions at my other PC), here i am

i hope no more problem after this..very tired

in fact, if the bent pin is the cause, why would the effects occurred right after i connected to the internet
so its a big possibility that the problem might came from virus/malware..

anyway thanks for the opinion guys..i feel happy + tired after going thru this..
so ill continue my overclocking project after i finished my lunch..

I have the display driver problem when I OC above 2.8GHz. Still hoping it will not occur anymore in the future, or else need to get a stand alone GPU since onboard VGA sharing its memory with RAM

Some Q here, let say I've OCed to 2.8GHz or 3.0GHz and decided to change from stock cooler to other cpu cooler, do I need to DC? Same goes to RAM, after tweaking the timing, and if I wish to change it to another better RAM, do I need to DC?

brisbane proc price gone down???!!saw viewnet latest pricelist onli 199?

be prepared for new proc.. lol..

Brisbane for RM199? Damn lah, it cost me an extra RM60 last week, but nvm as long I have it already Still trying to reach 3.0GHz

Maybe it is because AMD's new proc is about to be release

cis..i thought mine was the cheapest one..how come i didnt check properly yesterday
uhm..not much difference anyway..RM199 with RM203..boleh la tu..

I gave up on the 3Ghz quest .. Hhhahhahhhaaaa .. Now running Cool & Quiet ..

New AMD family member will reach very very soon ..

u r jz using default clock speed?
guys, shud i change my mobo frm tforce6100 to tforce 690g? does it worth all the hassle and extra money?
i can only get 2415MHz..far frm 3GHz...
maybe i shud jump ship to pentium e2160 but tat would means more money...

This post has been edited by smokey: Jun 21 2007, 02:57 PM

ok lar tu~...mine last time cost me RM300

mine running without OCing 1.9GHz....but urs just 1.0GHz??!! is there something wrong???

CnQ is on mar...then his multi he forgot to change it back from 3x to 5 x

This post has been edited by bryanyeo87: Jun 21 2007, 03:37 PM

Isn't true? Damn..make me want join oc back...

Yup...AMD price really drop a lot since Intel keep pressure AMD by releasing cheap and high overclockablity processor like e2140 n e2160.


-pWs-

my friend did a tune up on my system left the pc at his house for about 2 hrs and this is wut he came up for me ...he said, my cap ayam psu sux thats why cant go higher cz he changed tested with his silverstone zeus and the processor topped out at 3.2ghz @1.325v and memory at 1000mhz @ 2v

So...anyone can recommend me a good psu? other then zeus coz very expensive la
so this is the best my rig can go unless i chg psu



soulfly can add this in pls =D
3600+ X2 Brisbane G1 | bryanyeo87 | Abit KN9 Ultra | KVR667 FPY5 1gb x2 | AC 64 Pro 2508mhz

dun nid 2 delete my windsor as im still using it as well =D

This post has been edited by bryanyeo87: Jun 21 2007, 07:53 PM

You need to perform 32M SuperPI laa bro I think ST56F is enough

I see, maybe that's my problem. No wonder I've pushed even to 1.45v, still can't get 2.85GHz stable for Orthos. And I was about to get a cpu cooler. Maybe should save a bit for ST56F

bro, if im not wrong u have the same stepping as i do =b
come together angkat ST56F then can get discount

This post has been edited by bryanyeo87: Jun 21 2007, 08:20 PM