for stability mar...then u chk the psu sticker...the +12V should be at least 20A if u want to oc w/o GC...and get a cooler la...cheap one will do...AC64 freezer only rm100 in the bulk section mar. 120% no regrets on the cooler, but if u want scalability, get noctua or zalman la, then in the future can use the cooler for intel procs? or can still be with AMD

whr to get some cash ar....well will leace that to ur imagination la

I'm using ST56F .. Very stable I should say .. I OC to my system's max, the 12V rail never shift a single decimal point ..

Get a good cooler .. Something like Tuniq Tower 120, Noctua NH-U12F, High-end Thermalright or maybe Thermaltake's Big Typhoon VX .. I'm using a non-VX Big Typhoon .. With 1.4Voltage running Orthos for 6 hours, max temp only 42 C .. Nearly sold it off because it doesn't support AM2 but abit sayang lor .. Research here research there, modified a bracket that supports AM2 .. My Big Typhoon now supports 775, P4, K7, K8 and AM2 ..

Enabled my C&Q .. Multi set to Auto .. In idle mode will be x5.0 multiplier with 1.088 voltage .. When it detects any demand for performance, will raised automatically to x9.5 multiplier with 1.280 voltage .. C&Q can be used on mild OC but will not work on max OC ..



This post has been edited by Worm77: Jun 21 2007, 10:15 PM

aiyaks why didn't OC? then give your ST56F to me laa and even you enable your CnQ, you should increase your HTT back to default laa X5

u want cnq ar, try using crystal cpuid, and go to as low voltage and multi as u can ....damn kau cool and quiet wan

yala, like afosz said, if dun wan oc give us ur st56f ehehehheheh
eh want to ask ar, acbel is good ar? coz i heard its lifetime warranty?

I bought the SilverStone to OC my Athlon XP 2000+ | Abit NF7-S 2.0 .. Screwed up the bios .. Bought the Brisbane .. A week later successfully hot flashed bios for NF7S .. Too late to use the Athlon XP already ..

I tried OC .. Max I can go only 2660mhz .. Dunno where go wrong .. Fed up .. Stick to default and enabled C&Q .. Forgotten to set HTT to default .. Next time I restart my PC lar .. Lazy ler .. hhehhehehehhehe

My bro using AcBel LCD Power 500watts for his Pentium D 930 C1 .. The 12V rail also very stable ..

My Athlon XP ..


This post has been edited by Worm77: Jun 21 2007, 10:45 PM

use the new version la...4.12.2.336......

what do u mean u screw up the bios? wut u did la? o.0"

Not yet download the new version .. Later I download and try ..

Don't what happen .. It should be during the process of setting the bios and restarting PC .. Really don't know what happen .. Tried to boot .. No beep at all .. Nothing is working .. My heart stopped beating that very moment .. Exhausted all methods of resetting bios .. removing bios battery .. holding on to a key while booting .. NONE working .. My bro told me he could get hold of a NF7 board but needed a week or two .. Cannot tahan bought Brisbane .. After that only we managed to hot flash the bios of NF7-S .. Will keep or sell the Athlon XP set ..

---

Added on June 21, 2007, 11:32 pmJust downloaded CrystalCPUID 4.12.3.338 .. Will check out C&Q settings later ..

This post has been edited by Worm77: Jun 21 2007, 11:32 PM

this is am2 topic... pls go back to socket A forum =)

my first succesfull OC



X2 3600+ Brisbane | BIOSTAR TF 6100 AM2 | Corsair VSDDR2-667 | AC FreezerPro64 | 2469Mhz

the best that can i do....still learning

Congrates on your OC .. Go Go Go !!!

This post has been edited by Worm77: Jun 22 2007, 01:03 AM

here comes another 3GHz Brisbane user

at first was using 1.375v, but then the BSOD occurred after i passed the SuperPI 1M



so i pumped 1.4v, and 2.1vdimm, and below are the screenshot



anyway soulfly, please update my profile;

3600+ X2 Brisbane G1 | kalakatu | Biostar TForce 570U | Crucial Value DDR667 CL5 512MBx2 | Cooler Master Hyper TX 3003MHz

The server chip should be out any time now, but the desktop chip is going to take a while..

Its no surprise brisbane price drop..with the E2140 at RM3xx AMD have no choice but to drop price. Anyway, even without that pressure from intel brisbanes should get cheaper over time as well, since on 65nm you can produce 2x more chips per wafer at roughly the same cost..


Brisbane only got 1 stepping, and that is G1.

CnQ will end up setting the voltage too low when you overclock (voltage presets are hardwired into the processor, the windows driver will just take its pick from the presets). CrystalCPUID is the best way to overclock and still have a user controlled 'Cool n Quiet'. However, in my experience with CrystalCPUID the maximum voltage allowed will be limited by the processor, though voltage can be lowered all the way to 0.8v(which is good if you want a dead silent system).

kalakatu
Congrates .. Makes my hand itchy again to try for 3Ghz .. hhhheeheeeeee

lohwenli
Agree on your statement .. Default clock with C&Q is sufficient for me .. I guess I could get below 20C if the proc voltage is below 1V ..

congratz! =D eh u can try tightening the timings mar =D

sorry, was referring to batch number =b

@kalakatu
1.375v not enough.. atleast 1.39v..
or maybe u can try..
tras = 18
trc = 22

at first i thought it was enough since i can passed SuperPI 1M easily..
but then suddenly BSOD appeared during the SuperPI 32M session

i want to try thr tighter timing, but sadly my mobo hold it..
need to set the jumper to 2.4v for my value ram, of course scared it will fried
at least if i can use 2.2v and 2.3v, i can go further with CL4 and CL3

OT - anyway im thinking of selling my stuffs..click on the siggy if interested

Don't dare to go higher than 2.1Vdimm for the ram I'm using .. If the ram fried like hokkien mee, die lor ..

Sell AM2 changing platform ar??

same here lar..i dare not to jump straight to 2.4v..
uhm, maybe will changing platform, maybe wont..depends on budget..currently got some finance crisis

wont fry like hokkien mee wan,....just fry like mamak mee goreng when the wok catch fire only mar =b

ok, seriously, i dont think it will fry lor, coz if it is fried, my kvr667 would have been burnt silicon biscuits long time ago ( first OC attempt, set 2.3v dimm for 2 weeks w/o realizing it) lol....but dont la do till extreme....

btw, what is this ddr reference voltage in bios i see? it can change from +/-2% ~ 8%....wuts this ar? =/...and does trfc in memory settings affect OC or performance? currently its set at 75ns for dimm0,1,3....dimm 2 is auto set at 105ns...if i change it to 75..system cant boot...